ab8500_charger: Adds support for legacy USB chargers

A Legacy USB charger should be handled directly by the charger
driver.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>

drivers/power/ab8500_charger.c

@@ -88,6 +88,9 @@
 /* Step up/down delay in us */
 #define STEP_UDELAY			1000
 
+/* Wait for enumeration before charging in ms */
+#define WAIT_FOR_USB_ENUMERATION	5 * 1000
+
 #define CHARGER_STATUS_POLL 10 /* in ms */
 
 /* UsbLineStatus register - usb types */
@@ -201,6 +204,7 @@ struct ab8500_charger_usb_state {
  *			charger is enabled
  * @vbat		Battery voltage
  * @old_vbat		Previously measured battery voltage
+ * @usb_device_is_unrecognised	USB device is unrecognised by the hardware
  * @autopower		Indicate if we should have automatic pwron after pwrloss
  * @autopower_cfg	platform specific power config support for "pwron after pwrloss"
  * @parent:		Pointer to the struct ab8500
@@ -219,6 +223,7 @@ struct ab8500_charger_usb_state {
  * @check_usbchgnotok_work:	Work for checking USB charger not ok status
  * @kick_wd_work:		Work for kicking the charger watchdog in case
  *				of ABB rev 1.* due to the watchog logic bug
+ * @attach_work:		Work for checking the usb enumeration
  * @ac_charger_attached_work:	Work for checking if AC charger is still
  *				connected
  * @usb_charger_attached_work:	Work for checking if USB charger is still
@@ -243,6 +248,7 @@ struct ab8500_charger {
 	bool vddadc_en_usb;
 	int vbat;
 	int old_vbat;
+	bool usb_device_is_unrecognised;
 	bool autopower;
 	bool autopower_cfg;
 	struct ab8500 *parent;
@@ -260,6 +266,7 @@ struct ab8500_charger {
 	struct delayed_work check_hw_failure_work;
 	struct delayed_work check_usbchgnotok_work;
 	struct delayed_work kick_wd_work;
+	struct delayed_work attach_work;
 	struct delayed_work ac_charger_attached_work;
 	struct delayed_work usb_charger_attached_work;
 	struct work_struct ac_work;
@@ -597,6 +604,8 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 {
 	int ret = 0;
 
+	di->usb_device_is_unrecognised = false;
+
 	switch (link_status) {
 	case USB_STAT_STD_HOST_NC:
 	case USB_STAT_STD_HOST_C_NS:
@@ -642,9 +651,15 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 		dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
 				di->max_usb_in_curr);
 		break;
+	case USB_STAT_NOT_CONFIGURED:
+		if (di->vbus_detected) {
+			di->usb_device_is_unrecognised = true;
+			dev_dbg(di->dev, "USB Type - Legacy charger.\n");
+			di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+			break;
+		}
 	case USB_STAT_HM_IDGND:
 	case USB_STAT_NOT_VALID_LINK:
-	case USB_STAT_NOT_CONFIGURED:
 		dev_err(di->dev, "USB Type - Charging not allowed\n");
 		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
 		ret = -ENXIO;
@@ -1911,6 +1926,29 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work)
 	}
 }
 
+/**
+ * ab8500_charger_usb_link_attach_work() - delayd work to detect USB type
+ * @work:	pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
+{
+	struct ab8500_charger *di =
+		container_of(work, struct ab8500_charger, attach_work.work);
+	int ret;
+
+	/* Update maximum input current if USB enumeration is not detected */
+	if (!di->usb.charger_online) {
+		ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+		if (ret)
+			return;
+	}
+
+	ab8500_charger_set_usb_connected(di, true);
+	ab8500_power_supply_changed(di, &di->usb_chg.psy);
+}
+
 /**
  * ab8500_charger_usb_link_status_work() - work to detect USB type
  * @work:	pointer to the work_struct structure
@@ -1937,23 +1975,29 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
 		di->vbus_detected = 0;
 		ab8500_charger_set_usb_connected(di, false);
 		ab8500_power_supply_changed(di, &di->usb_chg.psy);
-	} else {
-		di->vbus_detected = 1;
-		ret = ab8500_charger_read_usb_type(di);
-		if (!ret) {
-			/* Update maximum input current */
-			ret = ab8500_charger_set_vbus_in_curr(di,
-					di->max_usb_in_curr);
-			if (ret)
-				return;
+		return;
+	}
 
-			ab8500_charger_set_usb_connected(di, true);
-			ab8500_power_supply_changed(di, &di->usb_chg.psy);
-		} else if (ret == -ENXIO) {
-			/* No valid charger type detected */
-			ab8500_charger_set_usb_connected(di, false);
-			ab8500_power_supply_changed(di, &di->usb_chg.psy);
+	di->vbus_detected = 1;
+	ret = ab8500_charger_read_usb_type(di);
+	if (!ret) {
+		if (di->usb_device_is_unrecognised) {
+			dev_dbg(di->dev,
+				"Potential Legacy Charger device. "
+				"Delay work for %d msec for USB enum "
+				"to finish",
+				WAIT_FOR_USB_ENUMERATION);
+			queue_delayed_work(di->charger_wq,
+					   &di->attach_work,
+					   msecs_to_jiffies(WAIT_FOR_USB_ENUMERATION));
+		} else {
+			queue_delayed_work(di->charger_wq,
+					   &di->attach_work, 0);
 		}
+	} else if (ret == -ENXIO) {
+		/* No valid charger type detected */
+		ab8500_charger_set_usb_connected(di, false);
+		ab8500_power_supply_changed(di, &di->usb_chg.psy);
 	}
 }
 
@@ -2911,6 +2955,9 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	INIT_DEFERRABLE_WORK(&di->check_vbat_work,
 		ab8500_charger_check_vbat_work);
 
+	INIT_DELAYED_WORK(&di->attach_work,
+		ab8500_charger_usb_link_attach_work);
+
 	/* Init work for charger detection */
 	INIT_WORK(&di->usb_link_status_work,
 		ab8500_charger_usb_link_status_work);