[SCSI] fusion - mpi header udpate

This updates mpi headers in fusion drivers to version 1.5.12.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

drivers/message/fusion/lsi/mpi.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Message independent structures and definitions
  *  Creation Date:  July 27, 2000
  *
- *    mpi.h Version:  01.05.08
+ *    mpi.h Version:  01.05.10
  *
  *  Version History
  *  ---------------
@@ -74,6 +74,8 @@
  *  06-24-05  01.05.08  Added function codes for SCSI IO 32 and
  *                      TargetAssistExtended requests.
  *                      Added EEDP IOCStatus codes.
+ *  08-03-05  01.05.09  Bumped MPI_HEADER_VERSION_UNIT.
+ *  08-30-05  01.05.10  Added 2 new IOCStatus codes for Target.
  *  --------------------------------------------------------------------------
  */
 
@@ -104,7 +106,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */
 
 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x0A)
+#define MPI_HEADER_VERSION_UNIT             (0x0C)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)
@@ -711,6 +713,8 @@ typedef struct _MSG_DEFAULT_REPLY
 #define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR   (0x006D)
 #define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
 #define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT        (0x006F)
+#define MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT     (0x0070)
+#define MPI_IOCSTATUS_TARGET_NAK_RECEIVED        (0x0071)
 
 /****************************************************************************/
 /*  Additional FCP target values (obsolete)                                 */
@@ -745,7 +749,7 @@ typedef struct _MSG_DEFAULT_REPLY
 #define MPI_IOCSTATUS_LAN_CANCELED              (0x0087)
 
 /****************************************************************************/
-/*  Serial Attached SCSI values                                                              */
+/*  Serial Attached SCSI values                                             */
 /****************************************************************************/
 
 #define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED    (0x0090)

drivers/message/fusion/lsi/mpi_history.txt

@@ -6,25 +6,25 @@
  Copyright (c) 2000-2005 LSI Logic Corporation.
 
  ---------------------------------------
- Header Set Release Version:    01.05.10
- Header Set Release Date:       03-11-05
+ Header Set Release Version:    01.05.12
+ Header Set Release Date:       08-30-05
  ---------------------------------------
 
  Filename               Current version     Prior version
  ----------             ---------------     -------------
- mpi.h                  01.05.08            01.05.07
- mpi_ioc.h              01.05.09            01.05.08
- mpi_cnfg.h             01.05.09            01.05.08
- mpi_init.h             01.05.05            01.05.04
- mpi_targ.h             01.05.05            01.05.04
+ mpi.h                  01.05.10            01.05.09
+ mpi_ioc.h              01.05.10            01.05.09
+ mpi_cnfg.h             01.05.11            01.05.10
+ mpi_init.h             01.05.06            01.05.06
+ mpi_targ.h             01.05.05            01.05.05
  mpi_fc.h               01.05.01            01.05.01
  mpi_lan.h              01.05.01            01.05.01
  mpi_raid.h             01.05.02            01.05.02
  mpi_tool.h             01.05.03            01.05.03
  mpi_inb.h              01.05.01            01.05.01
- mpi_sas.h              01.05.01            01.05.01
- mpi_type.h             01.05.01            01.05.01
- mpi_history.txt        01.05.09            01.05.09
+ mpi_sas.h              01.05.02            01.05.01
+ mpi_type.h             01.05.02            01.05.01
+ mpi_history.txt        01.05.12            01.05.11
 
 
  *  Date      Version   Description
@@ -91,6 +91,8 @@ mpi.h
  *  06-24-05  01.05.08  Added function codes for SCSI IO 32 and
  *                      TargetAssistExtended requests.
  *                      Added EEDP IOCStatus codes.
+ *  08-03-05  01.05.09  Bumped MPI_HEADER_VERSION_UNIT.
+ *  08-30-05  01.05.10  Added 2 new IOCStatus codes for Target.
  *  --------------------------------------------------------------------------
 
 mpi_ioc.h
@@ -164,6 +166,10 @@ mpi_ioc.h
  *                      Removed IOCFacts Reply EEDP Capability bit.
  *  06-24-05  01.05.09  Added 5 new IOCFacts Reply IOCCapabilities bits.
  *                      Added Max SATA Targets to SAS Discovery Error event.
+ *  08-30-05  01.05.10  Added 4 new events and their event data structures.
+ *                      Added new ReasonCode value for SAS Device Status Change
+ *                      event.
+ *                      Added new family code for FC949E.
  *  --------------------------------------------------------------------------
 
 mpi_cnfg.h
@@ -402,6 +408,23 @@ mpi_cnfg.h
  *                      Added OwnerDevHandle and Flags field to SAS PHY Page 0.
  *                      Added IOC GPIO Flags define to SAS Enclosure Page 0.
  *                      Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
+ *  08-03-05  01.05.10  Removed ISDataScrubRate and ISResyncRate from
+ *                      Manufacturing Page 4.
+ *                      Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
+ *                      Added NumDevsPerEnclosure field to SAS IO Unit page 2.
+ *                      Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
+ *                      define.
+ *                      Added EnclosureHandle field to SAS Expander page 0.
+ *                      Removed redundant NumTableEntriesProg field from SAS
+ *                      Expander Page 1.
+ *  08-30-05  01.05.11  Added DeviceID for FC949E and changed the DeviceID for
+ *                      SAS1078.
+ *                      Added more defines for Manufacturing Page 4 Flags field.
+ *                      Added more defines for IOCSettings and added
+ *                      ExpanderSpinup field to Bios Page 1.
+ *                      Added postpone SATA Init bit to SAS IO Unit Page 1
+ *                      ControlFlags.
+ *                      Changed LogEntry format for Log Page 0.
  *  --------------------------------------------------------------------------
 
 mpi_init.h
@@ -442,6 +465,8 @@ mpi_init.h
  *                      addressing.
  *  06-24-05  01.05.05  Added SCSI IO 32 structures and defines.
  *                      Added four new defines for SEP SlotStatus.
+ *  08-03-05  01.05.06  Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
+ *                      unique in the first 32 characters.
  *  --------------------------------------------------------------------------
 
 mpi_targ.h
@@ -582,6 +607,9 @@ mpi_inb.h
 
 mpi_sas.h
  *  08-19-04  01.05.01  Original release.
+ *  08-30-05  01.05.02  Added DeviceInfo bit for SEP.
+ *                      Added PrimFlags and Primitive field to SAS IO Unit
+ *                      Control request, and added a new operation code.
  *  --------------------------------------------------------------------------
 
 mpi_type.h
@@ -592,24 +620,25 @@ mpi_type.h
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *  05-11-04  01.03.01  Original release for MPI v1.3.
  *  08-19-04  01.05.01  Original release for MPI v1.5.
+ *  08-30-05  01.05.02  Added PowerPC option to #ifdef's.
  *  --------------------------------------------------------------------------
 
 mpi_history.txt         Parts list history
 
-Filename    01.05.10  01.05.09
-----------  --------  --------
-mpi.h       01.05.08  01.05.07
-mpi_ioc.h   01.05.09  01.05.08
-mpi_cnfg.h  01.05.09  01.05.08
-mpi_init.h  01.05.05  01.05.04
-mpi_targ.h  01.05.05  01.05.04
-mpi_fc.h    01.05.01  01.05.01
-mpi_lan.h   01.05.01  01.05.01
-mpi_raid.h  01.05.02  01.05.02
-mpi_tool.h  01.05.03  01.05.03
-mpi_inb.h   01.05.01  01.05.01
-mpi_sas.h   01.05.01  01.05.01
-mpi_type.h  01.05.01  01.05.01
+Filename    01.05.12  01.05.11  01.05.10  01.05.09
+----------  --------  --------  --------  --------
+mpi.h       01.05.10  01.05.09  01.05.08  01.05.07
+mpi_ioc.h   01.05.10  01.05.09  01.05.09  01.05.08
+mpi_cnfg.h  01.05.11  01.05.10  01.05.09  01.05.08
+mpi_init.h  01.05.06  01.05.06  01.05.05  01.05.04
+mpi_targ.h  01.05.05  01.05.05  01.05.05  01.05.04
+mpi_fc.h    01.05.01  01.05.01  01.05.01  01.05.01
+mpi_lan.h   01.05.01  01.05.01  01.05.01  01.05.01
+mpi_raid.h  01.05.02  01.05.02  01.05.02  01.05.02
+mpi_tool.h  01.05.03  01.05.03  01.05.03  01.05.03
+mpi_inb.h   01.05.01  01.05.01  01.05.01  01.05.01
+mpi_sas.h   01.05.02  01.05.01  01.05.01  01.05.01
+mpi_type.h  01.05.02  01.05.01  01.05.01  01.05.01
 
 Filename    01.05.08   01.05.07   01.05.06   01.05.05   01.05.04   01.05.03
 ----------  --------   --------   --------   --------   --------   --------

drivers/message/fusion/lsi/mpi_init.h

@@ -6,7 +6,7 @@
  *          Title:  MPI initiator mode messages and structures
  *  Creation Date:  June 8, 2000
  *
- *    mpi_init.h Version:  01.05.05
+ *    mpi_init.h Version:  01.05.06
  *
  *  Version History
  *  ---------------
@@ -50,6 +50,8 @@
  *                      addressing.
  *  06-24-05  01.05.05  Added SCSI IO 32 structures and defines.
  *                      Added four new defines for SEP SlotStatus.
+ *  08-03-05  01.05.06  Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
+ *                      unique in the first 32 characters.
  *  --------------------------------------------------------------------------
  */
 
@@ -290,8 +292,8 @@ typedef struct _MSG_SCSI_IO32_REQUEST
 
 /* SCSI IO 32 MsgFlags bits */
 #define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH                (0x01)
-#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_32             (0x00)
-#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_64             (0x01)
+#define MPI_SCSIIO32_MSGFLGS_32_SENSE_WIDTH             (0x00)
+#define MPI_SCSIIO32_MSGFLGS_64_SENSE_WIDTH             (0x01)
 
 #define MPI_SCSIIO32_MSGFLGS_SENSE_LOCATION             (0x02)
 #define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_HOST             (0x00)

drivers/message/fusion/lsi/mpi_ioc.h

@@ -6,7 +6,7 @@
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  August 11, 2000
  *
- *    mpi_ioc.h Version:  01.05.09
+ *    mpi_ioc.h Version:  01.05.10
  *
  *  Version History
  *  ---------------
@@ -83,6 +83,10 @@
  *                      Removed IOCFacts Reply EEDP Capability bit.
  *  06-24-05  01.05.09  Added 5 new IOCFacts Reply IOCCapabilities bits.
  *                      Added Max SATA Targets to SAS Discovery Error event.
+ *  08-30-05  01.05.10  Added 4 new events and their event data structures.
+ *                      Added new ReasonCode value for SAS Device Status Change
+ *                      event.
+ *                      Added new family code for FC949E.
  *  --------------------------------------------------------------------------
  */
 
@@ -464,6 +468,10 @@ typedef struct _MSG_EVENT_ACK_REPLY
 #define MPI_EVENT_PERSISTENT_TABLE_FULL     (0x00000011)
 #define MPI_EVENT_SAS_PHY_LINK_STATUS       (0x00000012)
 #define MPI_EVENT_SAS_DISCOVERY_ERROR       (0x00000013)
+#define MPI_EVENT_IR_RESYNC_UPDATE          (0x00000014)
+#define MPI_EVENT_IR2                       (0x00000015)
+#define MPI_EVENT_SAS_DISCOVERY             (0x00000016)
+#define MPI_EVENT_LOG_ENTRY_ADDED           (0x00000021)
 
 /* AckRequired field values */
 
@@ -480,6 +488,29 @@ typedef struct _EVENT_DATA_EVENT_CHANGE
 } EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE,
   EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t;
 
+/* LogEntryAdded Event data */
+
+/* this structure matches MPI_LOG_0_ENTRY in mpi_cnfg.h */
+#define MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH    (0x1C)
+typedef struct _EVENT_DATA_LOG_ENTRY
+{
+    U32         TimeStamp;                          /* 00h */
+    U32         Reserved1;                          /* 04h */
+    U16         LogSequence;                        /* 08h */
+    U16         LogEntryQualifier;                  /* 0Ah */
+    U8          LogData[MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH]; /* 0Ch */
+} EVENT_DATA_LOG_ENTRY, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY,
+  MpiEventDataLogEntry_t, MPI_POINTER pMpiEventDataLogEntry_t;
+
+typedef struct _EVENT_DATA_LOG_ENTRY_ADDED
+{
+    U16                     LogSequence;            /* 00h */
+    U16                     Reserved1;              /* 02h */
+    U32                     Reserved2;              /* 04h */
+    EVENT_DATA_LOG_ENTRY    LogEntry;               /* 08h */
+} EVENT_DATA_LOG_ENTRY_ADDED, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY_ADDED,
+  MpiEventDataLogEntryAdded_t, MPI_POINTER pMpiEventDataLogEntryAdded_t;
+
 /* SCSI Event data for Port, Bus and Device forms */
 
 typedef struct _EVENT_DATA_SCSI
@@ -538,6 +569,7 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
 #define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA            (0x05)
 #define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED      (0x06)
 #define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED           (0x07)
+#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
 
 
 /* SCSI Event data for Queue Full event */
@@ -579,6 +611,79 @@ typedef struct _EVENT_DATA_RAID
 #define MPI_EVENT_RAID_RC_SMART_DATA                    (0x0A)
 #define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED        (0x0B)
 
+
+/* MPI Integrated RAID Resync Update Event data */
+
+typedef struct _MPI_EVENT_DATA_IR_RESYNC_UPDATE
+{
+    U8                      VolumeID;                   /* 00h */
+    U8                      VolumeBus;                  /* 01h */
+    U8                      ResyncComplete;             /* 02h */
+    U8                      Reserved1;                  /* 03h */
+    U32                     Reserved2;                  /* 04h */
+} MPI_EVENT_DATA_IR_RESYNC_UPDATE,
+  MPI_POINTER PTR_MPI_EVENT_DATA_IR_RESYNC_UPDATE,
+  MpiEventDataIrResyncUpdate_t, MPI_POINTER pMpiEventDataIrResyncUpdate_t;
+
+/* MPI IR2 Event data */
+
+/* MPI_LD_STATE or MPI_PD_STATE */
+typedef struct _IR2_STATE_CHANGED
+{
+    U16                 PreviousState;  /* 00h */
+    U16                 NewState;       /* 02h */
+} IR2_STATE_CHANGED, MPI_POINTER PTR_IR2_STATE_CHANGED;
+
+typedef struct _IR2_PD_INFO
+{
+    U16                 DeviceHandle;           /* 00h */
+    U8                  TruncEnclosureHandle;   /* 02h */
+    U8                  TruncatedSlot;          /* 03h */
+} IR2_PD_INFO, MPI_POINTER PTR_IR2_PD_INFO;
+
+typedef union _MPI_IR2_RC_EVENT_DATA
+{
+    IR2_STATE_CHANGED   StateChanged;
+    U32                 Lba;
+    IR2_PD_INFO         PdInfo;
+} MPI_IR2_RC_EVENT_DATA, MPI_POINTER PTR_MPI_IR2_RC_EVENT_DATA;
+
+typedef struct _MPI_EVENT_DATA_IR2
+{
+    U8                      TargetID;             /* 00h */
+    U8                      Bus;                  /* 01h */
+    U8                      ReasonCode;           /* 02h */
+    U8                      PhysDiskNum;          /* 03h */
+    MPI_IR2_RC_EVENT_DATA   IR2EventData;         /* 04h */
+} MPI_EVENT_DATA_IR2, MPI_POINTER PTR_MPI_EVENT_DATA_IR2,
+  MpiEventDataIR2_t, MPI_POINTER pMpiEventDataIR2_t;
+
+/* MPI IR2 Event data ReasonCode values */
+#define MPI_EVENT_IR2_RC_LD_STATE_CHANGED           (0x01)
+#define MPI_EVENT_IR2_RC_PD_STATE_CHANGED           (0x02)
+#define MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL       (0x03)
+#define MPI_EVENT_IR2_RC_PD_INSERTED                (0x04)
+#define MPI_EVENT_IR2_RC_PD_REMOVED                 (0x05)
+#define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED       (0x06)
+#define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR       (0x07)
+
+/* defines for logical disk states */
+#define MPI_LD_STATE_OPTIMAL                        (0x00)
+#define MPI_LD_STATE_DEGRADED                       (0x01)
+#define MPI_LD_STATE_FAILED                         (0x02)
+#define MPI_LD_STATE_MISSING                        (0x03)
+#define MPI_LD_STATE_OFFLINE                        (0x04)
+
+/* defines for physical disk states */
+#define MPI_PD_STATE_ONLINE                         (0x00)
+#define MPI_PD_STATE_MISSING                        (0x01)
+#define MPI_PD_STATE_NOT_COMPATIBLE                 (0x02)
+#define MPI_PD_STATE_FAILED                         (0x03)
+#define MPI_PD_STATE_INITIALIZING                   (0x04)
+#define MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST        (0x05)
+#define MPI_PD_STATE_FAILED_AT_HOST_REQUEST         (0x06)
+#define MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON     (0xFF)
+
 /* MPI Link Status Change Event data */
 
 typedef struct _EVENT_DATA_LINK_STATUS
@@ -660,6 +765,20 @@ typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS
 #define MPI_EVENT_SAS_PLS_LR_RATE_1_5                       (0x08)
 #define MPI_EVENT_SAS_PLS_LR_RATE_3_0                       (0x09)
 
+/* SAS Discovery Event data */
+
+typedef struct _EVENT_DATA_SAS_DISCOVERY
+{
+    U32                     DiscoveryStatus;            /* 00h */
+    U32                     Reserved1;                  /* 04h */
+} EVENT_DATA_SAS_DISCOVERY, MPI_POINTER PTR_EVENT_DATA_SAS_DISCOVERY,
+  EventDataSasDiscovery_t, MPI_POINTER pEventDataSasDiscovery_t;
+
+#define MPI_EVENT_SAS_DSCVRY_COMPLETE                       (0x00000000)
+#define MPI_EVENT_SAS_DSCVRY_IN_PROGRESS                    (0x00000001)
+#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK                  (0xFFFF0000)
+#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT                 (16)
+
 /* SAS Discovery Errror Event data */
 
 typedef struct _EVENT_DATA_DISCOVERY_ERROR
@@ -869,6 +988,7 @@ typedef struct _MPI_FW_HEADER
 #define MPI_FW_HEADER_PID_FAMILY_919XL_FC       (0x0003) /* 919XL and 929XL */
 #define MPI_FW_HEADER_PID_FAMILY_939X_FC        (0x0004) /* 939X and 949X   */
 #define MPI_FW_HEADER_PID_FAMILY_959_FC         (0x0005)
+#define MPI_FW_HEADER_PID_FAMILY_949E_FC        (0x0006)
 /* SAS */
 #define MPI_FW_HEADER_PID_FAMILY_1064_SAS       (0x0001)
 #define MPI_FW_HEADER_PID_FAMILY_1068_SAS       (0x0002)

drivers/message/fusion/lsi/mpi_log_fc.h

+/*
+ *  Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved.
+ *
+ *  NAME:           fc_log.h
+ *  SUMMARY:        MPI IocLogInfo definitions for the SYMFC9xx chips
+ *  DESCRIPTION:    Contains the enumerated list of values that may be returned
+ *                  in the IOCLogInfo field of a MPI Default Reply Message.
+ *
+ *  CREATION DATE:  6/02/2000
+ *  ID:             $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $
+ */
+
+
+/*
+ * MpiIocLogInfo_t enum
+ *
+ * These 32 bit values are used in the IOCLogInfo field of the MPI reply
+ * messages.
+ * The value is 0xabcccccc where
+ *          a = The type of log info as per the MPI spec. Since these codes are
+ *              all for Fibre Channel this value will always be 2.
+ *          b = Specifies a subclass of the firmware where
+ *                  0 = FCP Initiator
+ *                  1 = FCP Target
+ *                  2 = LAN
+ *                  3 = MPI Message Layer
+ *                  4 = FC Link
+ *                  5 = Context Manager
+ *                  6 = Invalid Field Offset
+ *                  7 = State Change Info
+ *                  all others are reserved for future use
+ *          c = A specific value within the subclass.
+ *
+ * NOTE: Any new values should be added to the end of each subclass so that the
+ *       codes remain consistent across firmware releases.
+ */
+typedef enum _MpiIocLogInfoFc
+{
+    MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
+    MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN         = 0x20000007, /* Scatter Gather overrun  */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS      = 0x20000008, /* Receiver detected context mismatch via invalid header */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type  */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE       = 0x2000000A, /* Link failure occurred  */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT         = 0x2000000B, /* Transmitter timeout error */
+
+    MPI_IOCLOGINFO_FC_TARGET_BASE                   = 0x21000000,
+    MPI_IOCLOGINFO_FC_TARGET_NO_PDISC               = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
+    MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN               = 0x21000002, /* not sent because we are not logged in to the remote node */
+    MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP     = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP     = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA      = 0x21000005, /* Data In, Auto Response, missing data frames */
+    MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP     = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP     = 0x21000007, /* Auto-response after a write not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP     = 0x21000008, /* Data In, No Response, not completed due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA      = 0x21000009, /* Data In, No Response, missing data frames */
+    MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP     = 0x2100000a, /* Manual Response not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3             = 0x2100000b, /* not sent because remote node does not support Class 3 */
+    MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID        = 0x2100000c, /* not sent because login to remote node not validated */
+    MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND          = 0x2100000e, /* cleared from the outbound queue after a logout */
+    MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN    = 0x2100000f, /* cleared waiting for data after a logout */
+
+    MPI_IOCLOGINFO_FC_LAN_BASE                      = 0x22000000,
+    MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING         = 0x22000001, /* Transaction Context Sgl Missing */
+    MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE         = 0x22000002, /* Transaction Context found before an EOB */
+    MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET        = 0x22000003, /* Transaction Context value has reserved bits set */
+    MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG            = 0x22000004, /* Invalid SGL Flags */
+
+    MPI_IOCLOGINFO_FC_MSG_BASE                      = 0x23000000,
+
+    MPI_IOCLOGINFO_FC_LINK_BASE                     = 0x24000000,
+    MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT        = 0x24000001, /* Loop initialization timed out */
+    MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED      = 0x24000002, /* Another system controller already initialized the loop */
+    MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED     = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
+    MPI_IOCLOGINFO_FC_LINK_CRC_ERROR                = 0x24000004, /* CRC check detected error on received frame */
+
+    MPI_IOCLOGINFO_FC_CTX_BASE                      = 0x25000000,
+
+    MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET     = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
+    MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET      = 0x26ffffff,
+
+    MPI_IOCLOGINFO_FC_STATE_CHANGE                  = 0x27000000  /* The lower 24 bits give additional information concerning state change */
+
+} MpiIocLogInfoFc_t;

drivers/message/fusion/lsi/mpi_sas.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Serial Attached SCSI structures and definitions
  *  Creation Date:  August 19, 2004
  *
- *    mpi_sas.h Version:  01.05.01
+ *    mpi_sas.h Version:  01.05.02
  *
  *  Version History
  *  ---------------
@@ -14,6 +14,9 @@
  *  Date      Version   Description
  *  --------  --------  ------------------------------------------------------
  *  08-19-04  01.05.01  Original release.
+ *  08-30-05  01.05.02  Added DeviceInfo bit for SEP.
+ *                      Added PrimFlags and Primitive field to SAS IO Unit
+ *                      Control request, and added a new operation code.
  *  --------------------------------------------------------------------------
  */
 
@@ -51,6 +54,7 @@
  * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
  * data and SAS IO Unit Configuration pages.
  */
+#define MPI_SAS_DEVICE_INFO_SEP                 (0x00004000)
 #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE        (0x00002000)
 #define MPI_SAS_DEVICE_INFO_LSI_DEVICE          (0x00001000)
 #define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH       (0x00000800)
@@ -212,20 +216,26 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
     U8                      TargetID;           /* 0Ch */
     U8                      Bus;                /* 0Dh */
     U8                      PhyNum;             /* 0Eh */
-    U8                      Reserved4;          /* 0Fh */
-    U32                     Reserved5;          /* 10h */
+    U8                      PrimFlags;          /* 0Fh */
+    U32                     Primitive;          /* 10h */
     U64                     SASAddress;         /* 14h */
-    U32                     Reserved6;          /* 1Ch */
+    U32                     Reserved4;          /* 1Ch */
 } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
   SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
 
 /* values for the Operation field */
-#define MPI_SAS_OP_CLEAR_NOT_PRESENT             (0x01)
-#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT          (0x02)
-#define MPI_SAS_OP_PHY_LINK_RESET                (0x06)
-#define MPI_SAS_OP_PHY_HARD_RESET                (0x07)
-#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG           (0x08)
-#define MPI_SAS_OP_MAP_CURRENT                   (0x09)
+#define MPI_SAS_OP_CLEAR_NOT_PRESENT            (0x01)
+#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT         (0x02)
+#define MPI_SAS_OP_PHY_LINK_RESET               (0x06)
+#define MPI_SAS_OP_PHY_HARD_RESET               (0x07)
+#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG          (0x08)
+#define MPI_SAS_OP_MAP_CURRENT                  (0x09)
+#define MPI_SAS_OP_SEND_PRIMITIVE               (0x0A)
+
+/* values for the PrimFlags field */
+#define MPI_SAS_PRIMFLAGS_SINGLE                (0x08)
+#define MPI_SAS_PRIMFLAGS_TRIPLE                (0x02)
+#define MPI_SAS_PRIMFLAGS_REDUNDANT             (0x01)
 
 
 /* SAS IO Unit Control Reply */