param: convert some "on"/"off" users to strtobool

This changes several users of manual "on"/"off" parsing to use
strtobool.

Some side-effects:
- these uses will now parse y/n/1/0 meaningfully too
- the early_param uses will now bubble up parse errors
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Perches <joe@perches.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steve French <sfrench@samba.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/powerpc/kernel/rtasd.c

@@ -49,7 +49,7 @@ static unsigned int rtas_error_log_buffer_max;
 static unsigned int event_scan;
 static unsigned int rtas_event_scan_rate;
 
-static int full_rtas_msgs = 0;
+static bool full_rtas_msgs;
 
 /* Stop logging to nvram after first fatal error */
 static int logging_enabled; /* Until we initialize everything,
@@ -592,11 +592,6 @@ __setup("surveillance=", surveillance_setup);
 
 static int __init rtasmsgs_setup(char *str)
 {
-	if (strcmp(str, "on") == 0)
-		full_rtas_msgs = 1;
-	else if (strcmp(str, "off") == 0)
-		full_rtas_msgs = 0;
-
-	return 1;
+	return (kstrtobool(str, &full_rtas_msgs) == 0);
 }
 __setup("rtasmsgs=", rtasmsgs_setup);

arch/powerpc/platforms/pseries/hotplug-cpu.c

@@ -47,20 +47,14 @@ static DEFINE_PER_CPU(enum cpu_state_vals, current_state) = CPU_STATE_OFFLINE;
 
 static enum cpu_state_vals default_offline_state = CPU_STATE_OFFLINE;
 
-static int cede_offline_enabled __read_mostly = 1;
+static bool cede_offline_enabled __read_mostly = true;
 
 /*
  * Enable/disable cede_offline when available.
  */
 static int __init setup_cede_offline(char *str)
 {
-	if (!strcmp(str, "off"))
-		cede_offline_enabled = 0;
-	else if (!strcmp(str, "on"))
-		cede_offline_enabled = 1;
-	else
-		return 0;
-	return 1;
+	return (kstrtobool(str, &cede_offline_enabled) == 0);
 }
 
 __setup("cede_offline=", setup_cede_offline);

arch/s390/kernel/time.c

@@ -1432,7 +1432,7 @@ device_initcall(etr_init_sysfs);
 /*
  * Server Time Protocol (STP) code.
  */
-static int stp_online;
+static bool stp_online;
 static struct stp_sstpi stp_info;
 static void *stp_page;
 
@@ -1443,11 +1443,7 @@ static struct timer_list stp_timer;
 
 static int __init early_parse_stp(char *p)
 {
-	if (strncmp(p, "off", 3) == 0)
-		stp_online = 0;
-	else if (strncmp(p, "on", 2) == 0)
-		stp_online = 1;
-	return 0;
+	return kstrtobool(p, &stp_online);
 }
 early_param("stp", early_parse_stp);
 

arch/s390/kernel/topology.c

@@ -37,7 +37,7 @@ static void set_topology_timer(void);
 static void topology_work_fn(struct work_struct *work);
 static struct sysinfo_15_1_x *tl_info;
 
-static int topology_enabled = 1;
+static bool topology_enabled = true;
 static DECLARE_WORK(topology_work, topology_work_fn);
 
 /*
@@ -444,10 +444,7 @@ static const struct cpumask *cpu_book_mask(int cpu)
 
 static int __init early_parse_topology(char *p)
 {
-	if (strncmp(p, "off", 3))
-		return 0;
-	topology_enabled = 0;
-	return 0;
+	return kstrtobool(p, &topology_enabled);
 }
 early_param("topology", early_parse_topology);
 

arch/x86/kernel/aperture_64.c

@@ -227,19 +227,11 @@ static u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 	return 0;
 }
 
-static int gart_fix_e820 __initdata = 1;
+static bool gart_fix_e820 __initdata = true;
 
 static int __init parse_gart_mem(char *p)
 {
-	if (!p)
-		return -EINVAL;
-
-	if (!strncmp(p, "off", 3))
-		gart_fix_e820 = 0;
-	else if (!strncmp(p, "on", 2))
-		gart_fix_e820 = 1;
-
-	return 0;
+	return kstrtobool(p, &gart_fix_e820);
 }
 early_param("gart_fix_e820", parse_gart_mem);
 

include/linux/tick.h

@@ -111,7 +111,7 @@ enum tick_dep_bits {
 #define TICK_DEP_MASK_CLOCK_UNSTABLE	(1 << TICK_DEP_BIT_CLOCK_UNSTABLE)
 
 #ifdef CONFIG_NO_HZ_COMMON
-extern int tick_nohz_enabled;
+extern bool tick_nohz_enabled;
 extern int tick_nohz_tick_stopped(void);
 extern void tick_nohz_idle_enter(void);
 extern void tick_nohz_idle_exit(void);

kernel/time/hrtimer.c

@@ -515,7 +515,7 @@ static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
 /*
  * High resolution timer enabled ?
  */
-static int hrtimer_hres_enabled __read_mostly  = 1;
+static bool hrtimer_hres_enabled __read_mostly  = true;
 unsigned int hrtimer_resolution __read_mostly = LOW_RES_NSEC;
 EXPORT_SYMBOL_GPL(hrtimer_resolution);
 
@@ -524,13 +524,7 @@ EXPORT_SYMBOL_GPL(hrtimer_resolution);
  */
 static int __init setup_hrtimer_hres(char *str)
 {
-	if (!strcmp(str, "off"))
-		hrtimer_hres_enabled = 0;
-	else if (!strcmp(str, "on"))
-		hrtimer_hres_enabled = 1;
-	else
-		return 0;
-	return 1;
+	return (kstrtobool(str, &hrtimer_hres_enabled) == 0);
 }
 
 __setup("highres=", setup_hrtimer_hres);

kernel/time/tick-sched.c

@@ -486,20 +486,14 @@ void __init tick_nohz_init(void)
 /*
  * NO HZ enabled ?
  */
-int tick_nohz_enabled __read_mostly = 1;
+bool tick_nohz_enabled __read_mostly  = true;
 unsigned long tick_nohz_active  __read_mostly;
 /*
  * Enable / Disable tickless mode
  */
 static int __init setup_tick_nohz(char *str)
 {
-	if (!strcmp(str, "off"))
-		tick_nohz_enabled = 0;
-	else if (!strcmp(str, "on"))
-		tick_nohz_enabled = 1;
-	else
-		return 0;
-	return 1;
+	return (kstrtobool(str, &tick_nohz_enabled) == 0);
 }
 
 __setup("nohz=", setup_tick_nohz);