dt-bindings: usb: atmel: Mark EP child node as deprecated

There is no need to describe the end point in the deice tree. These
properties won't be use anymore, so mark them as deprecated to keep
the old device tree documented.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

Documentation/devicetree/bindings/usb/atmel-usb.txt

@@ -88,13 +88,15 @@ Required properties:
  - clock-names: Should contain two strings
 		"pclk" for the peripheral clock
 		"hclk" for the host clock
+
+Deprecated property:
  - ep childnode: To specify the number of endpoints and their properties.
 
 Optional properties:
  - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
    vbus is present (USB is connected).
 
-Required child node properties:
+Deprecated child node properties:
  - name: Name of the endpoint.
  - reg: Num of the endpoint.
  - atmel,fifo-size: Size of the fifo.
@@ -112,56 +114,4 @@ usb2: gadget@fff78000 {
 	clocks = <&utmi>, <&udphs_clk>;
 	clock-names = "hclk", "pclk";
 	atmel,vbus-gpio = <&pioB 19 0>;
-
-	ep@0 {
-		reg = <0>;
-		atmel,fifo-size = <64>;
-		atmel,nb-banks = <1>;
-	};
-
-	ep@1 {
-		reg = <1>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <2>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@2 {
-		reg = <2>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <2>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@3 {
-		reg = <3>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-	};
-
-	ep@4 {
-		reg = <4>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-	};
-
-	ep@5 {
-		reg = <5>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
-
-	ep@6 {
-		reg = <6>;
-		atmel,fifo-size = <1024>;
-		atmel,nb-banks = <3>;
-		atmel,can-dma;
-		atmel,can-isoc;
-	};
 };