Commit 4e44d2cb authored by Marc Zyngier's avatar Marc Zyngier

ARM: exynos4: convert to CONFIG_MULTI_IRQ_HANDLER

Convert the Exynos4 platforms to be using the gic_handle_irq
function as their primary interrupt handler.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
parent 041f777c
......@@ -854,6 +854,7 @@ config ARCH_EXYNOS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_MEMORY_H
select MULTI_IRQ_HANDLER
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
......
......@@ -15,6 +15,7 @@
#include <asm/mach/irq.h>
#include <asm/proc-fns.h>
#include <asm/exception.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
......@@ -33,8 +34,6 @@
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
unsigned int gic_bank_offset __read_mostly;
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
......@@ -210,6 +209,7 @@ void __init exynos4_init_clocks(int xtal)
void __init exynos4_init_irq(void)
{
int irq;
unsigned int bank_offset;
gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
......
......@@ -9,83 +9,8 @@
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#include <mach/map.h>
#include <asm/hardware/gic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \tmp, #0
mrc p15, 0, \base, c0, c0, 5
and \base, \base, #3
cmp \base, #0
beq 1f
ldr \tmp, =gic_bank_offset
ldr \tmp, [\tmp]
cmp \base, #1
beq 1f
cmp \base, #2
addeq \tmp, \tmp, \tmp
addne \tmp, \tmp, \tmp, LSL #1
1: ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
add \base, \base, \tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt if it's
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
addne \irqnr, \irqnr, #32
.endm
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt on the
* controller, since this requires the original irqstat value which
* we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
......@@ -16,6 +16,7 @@
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/cpu.h>
......@@ -210,6 +211,7 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.handle_irq = gic_handle_irq,
.init_machine = armlex4210_machine_init,
.timer = &exynos4_timer,
MACHINE_END
......@@ -32,6 +32,7 @@
#include <media/v4l2-mediabus.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/adc.h>
......@@ -1333,6 +1334,7 @@ MACHINE_START(NURI, "NURI")
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.handle_irq = gic_handle_irq,
.init_machine = nuri_machine_init,
.timer = &exynos4_timer,
.reserve = &nuri_reserve,
......
......@@ -22,6 +22,7 @@
#include <linux/lcd.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
......@@ -694,6 +695,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
.handle_irq = gic_handle_irq,
.init_machine = origen_machine_init,
.timer = &exynos4_timer,
.reserve = &origen_reserve,
......
......@@ -21,6 +21,7 @@
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/backlight.h>
......@@ -287,6 +288,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
MACHINE_END
......@@ -297,6 +299,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
MACHINE_END
......@@ -21,6 +21,7 @@
#include <linux/pwm_backlight.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
......@@ -375,6 +376,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
.reserve = &smdkv310_reserve,
......@@ -385,6 +387,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
MACHINE_END
......@@ -21,9 +21,10 @@
#include <linux/mmc/host.h>
#include <linux/i2c-gpio.h>
#include <linux/i2c/mcs.h>
#include <linux/i2c/atmel_mxt_ts.h>
<linux/i2c/atmel_mxt_ts.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
......@@ -1058,6 +1059,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.handle_irq = gic_handle_irq,
.init_machine = universal_machine_init,
.timer = &exynos4_timer,
.reserve = &universal_reserve,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment