Merge http://gkernel.bkbits.net/net-drivers-2.5

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

drivers/net/irda/Kconfig

@@ -9,7 +9,7 @@ config IRTTY_SIR
 	depends on IRDA
 	help
 	  Say Y here if you want to build support for the IrTTY line
-	  discipline.  If you want to compile it as a module (irtty.o), say M
+	  discipline.  If you want to compile it as a module (irtty-sir.o), say M
 	  here and read <file:Documentation/modules.txt>.  IrTTY makes it
 	  possible to use Linux's own serial driver for all IrDA ports that
 	  are 16550 compatible.  Most IrDA chips are 16550 compatible so you
@@ -18,6 +18,69 @@ config IRTTY_SIR
 
 	  If unsure, say Y.
 
+comment "Dongle support"
+
+config DONGLE
+	bool "Serial dongle support"
+	help
+	  Say Y here if you have an infrared device that connects to your
+	  computer's serial port. These devices are called dongles. Then say Y
+	  or M to the driver for your particular dongle below.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about serial dongles.
+
+config ESI_DONGLE
+	tristate "ESI JetEye PC dongle"
+	depends on DONGLE && IRDA
+	help
+	  Say Y here if you want to build support for the Extended Systems
+	  JetEye PC dongle.  If you want to compile it as a module, say M here
+	  and read <file:Documentation/modules.txt>.  The ESI dongle attaches
+	  to the normal 9-pin serial port connector, and can currently only be
+	  used by IrTTY.  To activate support for ESI dongles you will have to
+	  start irattach like this: "irattach -d esi".
+
+config ACTISYS_DONGLE
+	tristate "ACTiSYS IR-220L and IR220L+ dongle"
+	depends on DONGLE && IRDA
+	help
+	  Say Y here if you want to build support for the ACTiSYS IR-220L and
+	  IR220L+ dongles.  If you want to compile it as a module, say M here
+	  and read <file:Documentation/modules.txt>.  The ACTiSYS dongles
+	  attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  To activate support for ACTiSYS
+	  dongles you will have to start irattach like this:
+	  "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE
+	tristate "Tekram IrMate 210B dongle"
+	depends on DONGLE && IRDA
+	help
+	  Say Y here if you want to build support for the Tekram IrMate 210B
+	  dongle.  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  The Tekram dongle attaches to the
+	  normal 9-pin serial port connector, and can currently only be used
+	  by IrTTY.  To activate support for Tekram dongles you will have to
+	  start irattach like this: "irattach -d tekram".
+
+comment "Old SIR device drivers"
+
+config IRTTY_OLD
+	tristate "Old IrTTY (broken)"
+	depends on IRDA
+	help
+	  Say Y here if you want to build support for the IrTTY line
+	  discipline.  If you want to compile it as a module (irtty.o), say M
+	  here and read <file:Documentation/modules.txt>.  IrTTY makes it
+	  possible to use Linux's own serial driver for all IrDA ports that
+	  are 16550 compatible.  Most IrDA chips are 16550 compatible so you
+	  should probably say Y to this option.  Using IrTTY will however
+	  limit the speed of the connection to 115200 bps (IrDA SIR mode).
+
+	  If unsure, say N.
+
 config IRPORT_SIR
 	tristate "IrPORT (IrDA serial driver)"
 	depends on IRDA
@@ -35,10 +98,10 @@ config IRPORT_SIR
 
 	  If unsure, say Y.
 
-comment "Dongle support"
+comment "Old Serial dongle support"
 
-config DONGLE
-	bool "Serial dongle support"
+config DONGLE_OLD
+	bool "Old Serial dongle support"
 	help
 	  Say Y here if you have an infrared device that connects to your
 	  computer's serial port. These devices are called dongles. Then say Y
@@ -48,9 +111,9 @@ config DONGLE
 	  kernel: saying N will just cause the configurator to skip all
 	  the questions about serial dongles.
 
-config ESI_DONGLE
+config ESI_DONGLE_OLD
 	tristate "ESI JetEye PC dongle"
-	depends on DONGLE && IRDA
+	depends on DONGLE_OLD && IRDA
 	help
 	  Say Y here if you want to build support for the Extended Systems
 	  JetEye PC dongle.  If you want to compile it as a module, say M here
@@ -59,9 +122,9 @@ config ESI_DONGLE
 	  used by IrTTY.  To activate support for ESI dongles you will have to
 	  start irattach like this: "irattach -d esi".
 
-config ACTISYS_DONGLE
+config ACTISYS_DONGLE_OLD
 	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on DONGLE && IRDA
+	depends on DONGLE_OLD && IRDA
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-220L and
 	  IR220L+ dongles.  If you want to compile it as a module, say M here
@@ -71,9 +134,9 @@ config ACTISYS_DONGLE
 	  dongles you will have to start irattach like this:
 	  "irattach -d actisys" or "irattach -d actisys+".
 
-config TEKRAM_DONGLE
+config TEKRAM_DONGLE_OLD
 	tristate "Tekram IrMate 210B dongle"
-	depends on DONGLE && IRDA
+	depends on DONGLE_OLD && IRDA
 	help
 	  Say Y here if you want to build support for the Tekram IrMate 210B
 	  dongle.  If you want to compile it as a module, say M here and read
@@ -84,7 +147,7 @@ config TEKRAM_DONGLE
 
 config GIRBIL_DONGLE
 	tristate "Greenwich GIrBIL dongle"
-	depends on DONGLE && IRDA
+	depends on DONGLE_OLD && IRDA
 	help
 	  Say Y here if you want to build support for the Greenwich GIrBIL
 	  dongle.  If you want to compile it as a module, say M here and read
@@ -95,7 +158,7 @@ config GIRBIL_DONGLE
 
 config LITELINK_DONGLE
 	tristate "Parallax LiteLink dongle"
-	depends on DONGLE && IRDA
+	depends on DONGLE_OLD && IRDA
 	help
 	  Say Y here if you want to build support for the Parallax Litelink
 	  dongle.  If you want to compile it as a module, say M here and read
@@ -106,7 +169,7 @@ config LITELINK_DONGLE
 
 config MCP2120_DONGLE
 	tristate "Microchip MCP2120"
-	depends on DONGLE && IRDA
+	depends on DONGLE_OLD && IRDA
 	help
 	  Say Y here if you want to build support for the Microchip MCP2120
 	  dongle.  If you want to compile it as a module, say M here and read
@@ -120,7 +183,7 @@ config MCP2120_DONGLE
 
 config OLD_BELKIN_DONGLE
 	tristate "Old Belkin dongle"
-	depends on DONGLE && IRDA
+	depends on DONGLE_OLD && IRDA
 	help
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, say M here
@@ -130,11 +193,11 @@ config OLD_BELKIN_DONGLE
 
 config EP7211_IR
 	tristate "EP7211 I/R support"
-	depends on DONGLE && ARCH_EP7211 && IRDA
+	depends on DONGLE_OLD && ARCH_EP7211 && IRDA
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
-	depends on DONGLE && EXPERIMENTAL && IRDA
+	depends on DONGLE_OLD && EXPERIMENTAL && IRDA
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-200L
 	  dongle. If you want to compile it as a module, say M here and read
@@ -145,7 +208,7 @@ config ACT200L_DONGLE
 
 config MA600_DONGLE
 	tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
-	depends on DONGLE && EXPERIMENTAL && IRDA
+	depends on DONGLE_OLD && EXPERIMENTAL && IRDA
 	---help---
 	  Say Y here if you want to build support for the Mobile Action MA600
 	  dongle.  If you want to compile it as a module, say M here and read

drivers/net/irda/Makefile

@@ -5,10 +5,12 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-export-objs	= irport.o
+export-objs	= irport.o sir_core.o
 
-obj-$(CONFIG_IRTTY_SIR)		+= irtty.o
+# Old SIR drivers (irtty is broken)
+obj-$(CONFIG_IRTTY_OLD)		+= irtty.o
 obj-$(CONFIG_IRPORT_SIR)	+= 		irport.o
+# FIR drivers
 obj-$(CONFIG_USB_IRDA)		+= irda-usb.o
 obj-$(CONFIG_NSC_FIR)		+= nsc-ircc.o
 obj-$(CONFIG_WINBOND_FIR)	+= w83977af_ir.o
@@ -18,9 +20,10 @@ obj-$(CONFIG_TOSHIBA_FIR)	+= donauboe.o
 obj-$(CONFIG_SMC_IRCC_FIR)	+= smc-ircc.o	irport.o
 obj-$(CONFIG_ALI_FIR)		+= ali-ircc.o
 obj-$(CONFIG_VLSI_FIR)		+= vlsi_ir.o
-obj-$(CONFIG_ESI_DONGLE)	+= esi.o
-obj-$(CONFIG_TEKRAM_DONGLE)	+= tekram.o
-obj-$(CONFIG_ACTISYS_DONGLE)	+= actisys.o
+# Old dongle drivers for old SIR drivers
+obj-$(CONFIG_ESI_OLD)		+= esi.o
+obj-$(CONFIG_TEKRAM_OLD)	+= tekram.o
+obj-$(CONFIG_ACTISYS_OLD)	+= actisys.o
 obj-$(CONFIG_GIRBIL_DONGLE)	+= girbil.o
 obj-$(CONFIG_LITELINK_DONGLE)	+= litelink.o
 obj-$(CONFIG_OLD_BELKIN_DONGLE)	+= old_belkin.o
@@ -28,5 +31,14 @@ obj-$(CONFIG_EP7211_IR)		+= ep7211_ir.o
 obj-$(CONFIG_MCP2120_DONGLE)	+= mcp2120.o
 obj-$(CONFIG_ACT200L_DONGLE)	+= act200l.o
 obj-$(CONFIG_MA600_DONGLE)	+= ma600.o
+# New SIR drivers
+obj-$(CONFIG_IRTTY_SIR)		+= irtty-sir.o	sir-dev.o
+# New dongles drivers for new SIR drivers
+obj-$(CONFIG_ESI_DONGLE)	+= esi-sir.o
+obj-$(CONFIG_TEKRAM_DONGLE)	+= tekram-sir.o
+obj-$(CONFIG_ACTISYS_DONGLE)	+= actisys-sir.o
+
+# The SIR helper module
+sir-dev-objs := sir_core.o sir_dev.o sir_dongle.o sir_kthread.o
 
 include $(TOPDIR)/Rules.make

drivers/net/irda/actisys-sir.c

+/*********************************************************************
+ *                
+ * Filename:      actisys.c
+ * Version:       1.1
+ * Description:   Implementation for the ACTiSYS IR-220L and IR-220L+ 
+ *                dongles
+ * Status:        Beta.
+ * Authors:       Dag Brattli <dagb@cs.uit.no> (initially)
+ *		  Jean Tourrilhes <jt@hpl.hp.com> (new version)
+ *		  Martin Diehl <mad@mdiehl.de> (new version for sir_dev)
+ * Created at:    Wed Oct 21 20:02:35 1998
+ * Modified at:   Sun Oct 27 22:02:13 2002
+ * Modified by:   Martin Diehl <mad@mdiehl.de>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 1999 Jean Tourrilhes
+ *     Copyright (c) 2002 Martin Diehl
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+/*
+ * Changelog
+ *
+ * 0.8 -> 0.9999 - Jean
+ *	o New initialisation procedure : much safer and correct
+ *	o New procedure the change speed : much faster and simpler
+ *	o Other cleanups & comments
+ *	Thanks to Lichen Wang @ Actisys for his excellent help...
+ *
+ * 1.0 -> 1.1 - Martin Diehl
+ *	modified for new sir infrastructure
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+/* 
+ * Define the timing of the pulses we send to the dongle (to reset it, and
+ * to toggle speeds). Basically, the limit here is the propagation speed of
+ * the signals through the serial port, the dongle being much faster.  Any
+ * serial port support 115 kb/s, so we are sure that pulses 8.5 us wide can
+ * go through cleanly . If you are on the wild side, you can try to lower
+ * this value (Actisys recommended me 2 us, and 0 us work for me on a P233!)
+ */
+#define MIN_DELAY 10	/* 10 us to be on the conservative side */
+
+static int actisys_open(struct sir_dev *);
+static int actisys_close(struct sir_dev *);
+static int actisys_change_speed(struct sir_dev *, unsigned);
+static int actisys_reset(struct sir_dev *);
+
+/* These are the baudrates supported, in the order available */
+/* Note : the 220L doesn't support 38400, but we will fix that below */
+static __u32 baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
+
+#define MAX_SPEEDS (sizeof(baud_rates)/sizeof(baud_rates[0]))
+
+static struct dongle_driver act220l = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "Actisys ACT-220L",
+	.type		= IRDA_ACTISYS_DONGLE,
+	.open		= actisys_open,
+	.close		= actisys_close,
+	.reset		= actisys_reset,
+	.set_speed	= actisys_change_speed,
+};
+
+static struct dongle_driver act220l_plus = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "Actisys ACT-220L+",
+	.type		= IRDA_ACTISYS_PLUS_DONGLE,
+	.open		= actisys_open,
+	.close		= actisys_close,
+	.reset		= actisys_reset,
+	.set_speed	= actisys_change_speed,
+};
+
+int __init actisys_sir_init(void)
+{
+	int ret;
+
+	/* First, register an Actisys 220L dongle */
+	ret = irda_register_dongle(&act220l);
+	if (ret < 0)
+		return ret;
+
+	/* Now, register an Actisys 220L+ dongle */
+	ret = irda_register_dongle(&act220l_plus);
+	if (ret < 0) {
+		irda_unregister_dongle(&act220l);
+		return ret;
+	}
+	return 0;
+}
+
+void __exit actisys_sir_cleanup(void)
+{
+	/* We have to remove both dongles */
+	irda_unregister_dongle(&act220l_plus);
+	irda_unregister_dongle(&act220l);
+}
+
+static int actisys_open(struct sir_dev *dev)
+{
+	struct qos_info *qos = &dev->qos;
+
+	dev->set_dtr_rts(dev, TRUE, TRUE);
+
+	/* Set the speeds we can accept */
+	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+
+	/* Remove support for 38400 if this is not a 220L+ dongle */
+	if (dev->dongle_drv->type == IRDA_ACTISYS_DONGLE)
+		qos->baud_rate.bits &= ~IR_38400;
+
+	qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
+	irda_qos_bits_to_value(qos);
+
+	return 0;
+}
+
+static int actisys_close(struct sir_dev *dev)
+{
+	/* Power off the dongle */
+	dev->set_dtr_rts(dev, FALSE, FALSE);
+
+	return 0;
+}
+
+/*
+ * Function actisys_change_speed (task)
+ *
+ *    Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
+ *    To cycle through the available baud rates, pulse RTS low for a few us.
+ *
+ *	First, we reset the dongle to always start from a known state.
+ *	Then, we cycle through the speeds by pulsing RTS low and then up.
+ *	The dongle allow us to pulse quite fast, se we can set speed in one go,
+ * which is must faster ( < 100 us) and less complex than what is found
+ * in some other dongle drivers...
+ *	Note that even if the new speed is the same as the current speed,
+ * we reassert the speed. This make sure that things are all right,
+ * and it's fast anyway...
+ *	By the way, this function will work for both type of dongles,
+ * because the additional speed is at the end of the sequence...
+ */
+static int actisys_change_speed(struct sir_dev *dev, unsigned speed)
+{
+	int ret = 0;
+	int i = 0;
+
+        IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__,
+        	speed, dev->speed);
+
+	/* dongle was already resetted from irda_request state machine,
+	 * we are in known state (dongle default)
+	 */
+
+	/* 
+	 * Now, we can set the speed requested. Send RTS pulses until we
+         * reach the target speed 
+	 */
+	for (i=0; i<MAX_SPEEDS; i++) {
+		if (speed == baud_rates[i]) {
+			dev->speed = baud_rates[i];
+			break;
+		}
+		/* Set RTS low for 10 us */
+		dev->set_dtr_rts(dev, TRUE, FALSE);
+		udelay(MIN_DELAY);
+
+		/* Set RTS high for 10 us */
+		dev->set_dtr_rts(dev, TRUE, TRUE);
+		udelay(MIN_DELAY);
+	}
+
+	/* Check if life is sweet... */
+	if (i >= MAX_SPEEDS)
+		ret = -1;  /* This should not happen */
+
+	/* Basta lavoro, on se casse d'ici... */
+	return ret;
+}
+
+/*
+ * Function actisys_reset (task)
+ *
+ *      Reset the Actisys type dongle. Warning, this function must only be
+ *      called with a process context!
+ *
+ * We need to do two things in this function :
+ *	o first make sure that the dongle is in a state where it can operate
+ *	o second put the dongle in a know state
+ *
+ *	The dongle is powered of the RTS and DTR lines. In the dongle, there
+ * is a big capacitor to accomodate the current spikes. This capacitor
+ * takes a least 50 ms to be charged. In theory, the Bios set those lines
+ * up, so by the time we arrive here we should be set. It doesn't hurt
+ * to be on the conservative side, so we will wait...
+ * <Martin : move above comment to irda_config_fsm>
+ *	Then, we set the speed to 9600 b/s to get in a known state (see in
+ * change_speed for details). It is needed because the IrDA stack
+ * has tried to set the speed immediately after our first return,
+ * so before we can be sure the dongle is up and running.
+ */
+
+static int actisys_reset(struct sir_dev *dev)
+{
+	/* Reset the dongle : set DTR low for 10 us */
+	dev->set_dtr_rts(dev, FALSE, TRUE);
+	udelay(MIN_DELAY);
+
+	/* Go back to normal mode */
+	dev->set_dtr_rts(dev, TRUE, TRUE);
+	
+	dev->speed = 9600;	/* That's the default */
+
+	return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> - Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");	
+MODULE_LICENSE("GPL");
+
+module_init(actisys_sir_init);
+module_exit(actisys_sir_cleanup);

drivers/net/irda/donauboe.c

@@ -1825,26 +1825,26 @@ toshoboe_wakeup (struct pci_dev *pci_dev)
   return 0;
 }
 
-static struct pci_driver toshoboe_pci_driver = {
-  name		: "toshoboe",
-  id_table	: toshoboe_pci_tbl,
-  probe		: toshoboe_open,
-  remove	: toshoboe_close,
-  suspend	: toshoboe_gotosleep,
-  resume	: toshoboe_wakeup 
+static struct pci_driver donauboe_pci_driver = {
+	.name		= "donauboe",
+	.id_table	= toshoboe_pci_tbl,
+	.probe		= toshoboe_open,
+	.remove		= toshoboe_close,
+	.suspend	= toshoboe_gotosleep,
+	.resume		= toshoboe_wakeup 
 };
 
-int __init
-toshoboe_init (void)
+static int __init
+donauboe_init (void)
 {
-  return pci_module_init(&toshoboe_pci_driver);
+  return pci_module_init(&donauboe_pci_driver);
 }
 
-STATIC void __exit
-toshoboe_cleanup (void)
+static void __exit
+donauboe_cleanup (void)
 {
-  pci_unregister_driver(&toshoboe_pci_driver);
+  pci_unregister_driver(&donauboe_pci_driver);
 }
 
-module_init(toshoboe_init);
-module_exit(toshoboe_cleanup);
+module_init(donauboe_init);
+module_exit(donauboe_cleanup);

drivers/net/irda/esi-sir.c

+/*********************************************************************
+ *                
+ * Filename:      esi.c
+ * Version:       1.6
+ * Description:   Driver for the Extended Systems JetEye PC dongle
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sat Feb 21 18:54:38 1998
+ * Modified at:   Sun Oct 27 22:01:04 2002
+ * Modified by:   Martin Diehl <mad@mdiehl.de>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, <dagb@cs.uit.no>,
+ *     Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>,
+ *     Copyright (c) 2002 Martin Diehl, <mad@mdiehl.de>,
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int esi_open(struct sir_dev *);
+static int esi_close(struct sir_dev *);
+static int esi_change_speed(struct sir_dev *, unsigned);
+static int esi_reset(struct sir_dev *);
+
+static struct dongle_driver esi = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "JetEye PC ESI-9680 PC",
+	.type		= IRDA_ESI_DONGLE,
+	.open		= esi_open,
+	.close		= esi_close,
+	.reset		= esi_reset,
+	.set_speed	= esi_change_speed,
+};
+
+static int __init esi_sir_init(void)
+{
+	return irda_register_dongle(&esi);
+}
+
+static void __exit esi_sir_cleanup(void)
+{
+	irda_unregister_dongle(&esi);
+}
+
+static int esi_open(struct sir_dev *dev)
+{
+	struct qos_info *qos = &dev->qos;
+
+	qos->baud_rate.bits &= IR_9600|IR_19200|IR_115200;
+	qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
+	irda_qos_bits_to_value(qos);
+
+	/* shouldn't we do set_dtr_rts(FALSE, TRUE) here (power up at 9600)? */
+
+	return 0;
+}
+
+static int esi_close(struct sir_dev *dev)
+{
+	/* Power off dongle */
+	dev->set_dtr_rts(dev, FALSE, FALSE);
+
+	return 0;
+}
+
+/*
+ * Function esi_change_speed (task)
+ *
+ *    Set the speed for the Extended Systems JetEye PC ESI-9680 type dongle
+ *
+ */
+static int esi_change_speed(struct sir_dev *dev, unsigned speed)
+{
+	int dtr, rts;
+	
+	switch (speed) {
+	case 19200:
+		dtr = TRUE;
+		rts = FALSE;
+		break;
+	case 115200:
+		dtr = rts = TRUE;
+		break;
+	default:
+		speed = 9600;
+		/* fall through */
+	case 9600:
+		dtr = FALSE;
+		rts = TRUE;
+		break;
+	}
+
+	/* Change speed of dongle */
+	dev->set_dtr_rts(dev, dtr, rts);
+	dev->speed = speed;
+
+	/* do we need some delay for power stabilization? */
+
+	return 0;
+}
+
+/*
+ * Function esi_reset (task)
+ *
+ *    Reset dongle;
+ *
+ */
+static int esi_reset(struct sir_dev *dev)
+{
+	dev->set_dtr_rts(dev, FALSE, FALSE);
+
+	/* Hm, probably repower to 9600 and some delays? */
+
+	return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Extended Systems JetEye PC dongle driver");
+MODULE_LICENSE("GPL");
+
+module_init(esi_sir_init);
+module_exit(esi_sir_cleanup);
+

drivers/net/irda/irtty-sir.h

+/*********************************************************************
+ *
+ *	sir_tty.h:	definitions for the irtty_sir client driver (former irtty)
+ *
+ *	Copyright (c) 2002 Martin Diehl
+ *
+ *	This program is free software; you can redistribute it and/or 
+ *	modify it under the terms of the GNU General Public License as 
+ *	published by the Free Software Foundation; either version 2 of 
+ *	the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#ifndef IRTTYSIR_H
+#define IRTTYSIR_H
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>		// chipio_t
+
+#define IRTTY_IOC_MAGIC 'e'
+#define IRTTY_IOCTDONGLE  _IO(IRTTY_IOC_MAGIC, 1)
+#define IRTTY_IOCGET     _IOR(IRTTY_IOC_MAGIC, 2, struct irtty_info)
+#define IRTTY_IOC_MAXNR   2
+
+struct sirtty_cb {
+	magic_t magic;
+
+	struct sir_dev *dev;
+	struct tty_struct  *tty;
+
+	chipio_t io;               /* IrDA controller information */
+};
+
+#endif

drivers/net/irda/sir-dev.h

+/*********************************************************************
+ *
+ *	sir.h:	include file for irda-sir device abstraction layer
+ *
+ *	Copyright (c) 2002 Martin Diehl
+ *
+ *	This program is free software; you can redistribute it and/or 
+ *	modify it under the terms of the GNU General Public License as 
+ *	published by the Free Software Foundation; either version 2 of 
+ *	the License, or (at your option) any later version.
+ *
+ ********************************************************************/
+
+#ifndef IRDA_SIR_H
+#define IRDA_SIR_H
+
+#include <linux/netdevice.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>		// iobuff_t
+
+/* FIXME: unify irda_request with sir_fsm! */
+
+struct irda_request {
+	struct list_head lh_request;
+	unsigned long pending;
+	void (*func)(void *);
+	void *data;
+	struct timer_list timer;
+};
+
+struct sir_fsm {
+	struct semaphore	sem;
+	struct irda_request	rq;
+	unsigned		state, substate;
+	int			param;
+	int			result;
+};
+
+#define SIRDEV_STATE_WAIT_TX_COMPLETE	0x0100
+
+/* substates for wait_tx_complete */
+#define SIRDEV_STATE_WAIT_XMIT		0x0101
+#define SIRDEV_STATE_WAIT_UNTIL_SENT	0x0102
+#define SIRDEV_STATE_TX_DONE		0x0103
+
+#define SIRDEV_STATE_DONGLE_OPEN		0x0300
+
+/* 0x0301-0x03ff reserved for individual dongle substates */
+
+#define SIRDEV_STATE_DONGLE_CLOSE	0x0400
+
+/* 0x0401-0x04ff reserved for individual dongle substates */
+
+#define SIRDEV_STATE_SET_DTR_RTS		0x0500
+
+#define SIRDEV_STATE_SET_SPEED		0x0700
+#define SIRDEV_STATE_DONGLE_CHECK	0x0800
+#define SIRDEV_STATE_DONGLE_RESET	0x0900
+
+/* 0x0901-0x09ff reserved for individual dongle substates */
+
+#define SIRDEV_STATE_DONGLE_SPEED	0x0a00
+/* 0x0a01-0x0aff reserved for individual dongle substates */
+
+#define SIRDEV_STATE_PORT_SPEED		0x0b00
+#define SIRDEV_STATE_DONE		0x0c00
+#define SIRDEV_STATE_ERROR		0x0d00
+#define SIRDEV_STATE_COMPLETE		0x0e00
+
+#define SIRDEV_STATE_DEAD		0xffff
+
+
+struct sir_dev;
+
+struct dongle_driver {
+
+	struct module *owner;
+
+	const char *driver_name;
+
+	IRDA_DONGLE type;
+
+	int	(*open)(struct sir_dev *dev);
+	int	(*close)(struct sir_dev *dev);
+	int	(*reset)(struct sir_dev *dev);
+	int	(*set_speed)(struct sir_dev *dev, unsigned speed);
+
+	struct list_head dongle_list;
+};
+
+struct sir_driver {
+
+	struct module *owner;
+
+	const char *driver_name;
+
+	int qos_mtt_bits;
+
+	int (*chars_in_buffer)(struct sir_dev *dev);
+	void (*wait_until_sent)(struct sir_dev *dev);
+	int (*set_speed)(struct sir_dev *dev, unsigned speed);
+	int (*set_dtr_rts)(struct sir_dev *dev, int dtr, int rts);
+
+	int (*do_write)(struct sir_dev *dev, const unsigned char *ptr, size_t len);
+
+	int (*start_dev)(struct sir_dev *dev);
+	int (*stop_dev)(struct sir_dev *dev);
+};
+
+
+/* exported */
+
+extern int irda_register_dongle(struct dongle_driver *new);
+extern int irda_unregister_dongle(struct dongle_driver *drv);
+
+extern struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *name);
+extern int sirdev_put_instance(struct sir_dev *self);
+
+extern int sirdev_set_dongle(struct sir_dev *dev, IRDA_DONGLE type);
+extern void sirdev_write_complete(struct sir_dev *dev);
+extern int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count);
+
+/* not exported */
+
+extern int sirdev_get_dongle(struct sir_dev *self, IRDA_DONGLE type);
+extern int sirdev_put_dongle(struct sir_dev *self);
+
+extern int sirdev_raw_write(struct sir_dev *dev, const char *buf, int len);
+extern int sirdev_raw_read(struct sir_dev *dev, char *buf, int len);
+extern void sirdev_enable_rx(struct sir_dev *dev);
+
+extern int sirdev_schedule_request(struct sir_dev *dev, int state, unsigned param);
+extern int __init irda_thread_create(void);
+extern void __exit irda_thread_join(void);
+
+/* inline helpers */
+
+static inline int sirdev_schedule_speed(struct sir_dev *dev, unsigned speed)
+{
+	return sirdev_schedule_request(dev, SIRDEV_STATE_SET_SPEED, speed);
+}
+
+static inline int sirdev_schedule_dongle_open(struct sir_dev *dev, int dongle_id)
+{
+	return sirdev_schedule_request(dev, SIRDEV_STATE_DONGLE_OPEN, dongle_id);
+}
+
+static inline int sirdev_schedule_dongle_close(struct sir_dev *dev)
+{
+	return sirdev_schedule_request(dev, SIRDEV_STATE_DONGLE_CLOSE, 0);
+}
+
+static inline int sirdev_schedule_dtr_rts(struct sir_dev *dev, int dtr, int rts)
+{
+	int	dtrrts;
+
+	dtrrts = ((dtr) ? 0x02 : 0x00) | ((rts) ? 0x01 : 0x00);
+	return sirdev_schedule_request(dev, SIRDEV_STATE_SET_DTR_RTS, dtrrts);
+}
+
+#if 0
+static inline int sirdev_schedule_mode(struct sir_dev *dev, int mode)
+{
+	return sirdev_schedule_request(dev, SIRDEV_STATE_SET_MODE, mode);
+}
+#endif
+
+
+struct sir_dev {
+	struct net_device *netdev;
+	struct net_device_stats stats;
+
+	struct irlap_cb    *irlap;
+
+	struct qos_info qos;
+
+	char hwname[32];
+
+	struct sir_fsm fsm;
+	atomic_t enable_rx;
+	spinlock_t tx_lock;
+
+	u32 new_speed;
+ 	u32 flags;
+
+	unsigned	speed;
+
+	iobuff_t tx_buff;          /* Transmit buffer */
+	iobuff_t rx_buff;          /* Receive buffer */
+	struct sk_buff *tx_skb;
+
+	const struct dongle_driver * dongle_drv;
+	const struct sir_driver * drv;
+	void *priv;
+
+	/* dongle callbacks to the SIR device */
+	int (*read)(struct sir_dev *, char *buf, int len);
+	int (*write)(struct sir_dev *, const char *buf, int len);
+	int (*set_dtr_rts)(struct sir_dev *, int dtr, int rts);
+};
+
+#endif	/* IRDA_SIR_H */

drivers/net/irda/sir_core.c

+/*********************************************************************
+ *
+ *	sir_core.c:	module core for irda-sir abstraction layer
+ *
+ *	Copyright (c) 2002 Martin Diehl
+ * 
+ *	This program is free software; you can redistribute it and/or 
+ *	modify it under the terms of the GNU General Public License as 
+ *	published by the Free Software Foundation; either version 2 of 
+ *	the License, or (at your option) any later version.
+ *
+ ********************************************************************/    
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+/***************************************************************************/
+
+MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
+MODULE_DESCRIPTION("IrDA SIR core");
+MODULE_LICENSE("GPL");
+
+/***************************************************************************/
+
+EXPORT_SYMBOL(irda_register_dongle);
+EXPORT_SYMBOL(irda_unregister_dongle);
+
+EXPORT_SYMBOL(sirdev_get_instance);
+EXPORT_SYMBOL(sirdev_put_instance);
+
+EXPORT_SYMBOL(sirdev_set_dongle);
+EXPORT_SYMBOL(sirdev_write_complete);
+EXPORT_SYMBOL(sirdev_receive);
+
+static int __init sir_core_init(void)
+{
+	return irda_thread_create();
+}
+
+static void __exit sir_core_exit(void)
+{
+	irda_thread_join();
+}
+
+module_init(sir_core_init);
+module_exit(sir_core_exit);
+

drivers/net/irda/sir_dongle.c

+/*********************************************************************
+ *
+ *	sir_dongle.c:	manager for serial dongle protocol drivers
+ *
+ *	Copyright (c) 2002 Martin Diehl
+ *
+ *	This program is free software; you can redistribute it and/or 
+ *	modify it under the terms of the GNU General Public License as 
+ *	published by the Free Software Foundation; either version 2 of 
+ *	the License, or (at your option) any later version.
+ *
+ ********************************************************************/    
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+#include <linux/kmod.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+/**************************************************************************
+ *
+ * dongle registration and attachment
+ *
+ */
+
+static LIST_HEAD(dongle_list);			/* list of registered dongle drivers */
+static DECLARE_MUTEX(dongle_list_lock);		/* protects the list */
+
+int irda_register_dongle(struct dongle_driver *new)
+{
+	struct list_head *entry;
+	struct dongle_driver *drv;
+
+	IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n",
+		   __FUNCTION__, new->driver_name, new->type);
+
+	down(&dongle_list_lock);
+	list_for_each(entry, &dongle_list) {
+		drv = list_entry(entry, struct dongle_driver, dongle_list);
+		if (new->type == drv->type) {
+			up(&dongle_list_lock);
+			return -EEXIST;
+		}
+	}
+	list_add(&new->dongle_list, &dongle_list);
+	up(&dongle_list_lock);
+	return 0;
+}
+
+int irda_unregister_dongle(struct dongle_driver *drv)
+{
+	down(&dongle_list_lock);
+	list_del(&drv->dongle_list);
+	up(&dongle_list_lock);
+	return 0;
+}
+
+int sirdev_get_dongle(struct sir_dev *dev, IRDA_DONGLE type)
+{
+	struct list_head *entry;
+	const struct dongle_driver *drv = NULL;
+	int err = -EINVAL;
+
+#ifdef CONFIG_KMOD
+	char modname[30];
+
+	sprintf(modname, "irda-dongle-%d", type);
+	request_module(modname);
+#endif
+
+	if (dev->dongle_drv != NULL)
+		return -EBUSY;
+	
+	/* serialize access to the list of registered dongles */
+	down(&dongle_list_lock);
+
+	list_for_each(entry, &dongle_list) {
+		drv = list_entry(entry, struct dongle_driver, dongle_list);
+		if (drv->type == type)
+			break;
+		else
+			drv = NULL;
+	}
+
+	if (!drv) {
+		err = -ENODEV;
+		goto out_unlock;	/* no such dongle */
+	}
+
+	/* handling of SMP races with dongle module removal - three cases:
+	 * 1) dongle driver was already unregistered - then we haven't found the
+	 *	requested dongle above and are already out here
+	 * 2) the module is already marked deleted but the driver is still
+	 *	registered - then the try_inc_mod_count() below will fail
+	 * 3) the try_inc_mod_count() below succeeds before the module is marked
+	 *	deleted - then sys_delete_module() fails and prevents the removal
+	 *	because the module is in use.
+	 */
+
+	if (drv->owner && !try_inc_mod_count(drv->owner)) {
+		err = -ESTALE;
+		goto out_unlock;	/* rmmod already pending */
+	}
+
+	/* Initialize dongle driver callbacks */
+	dev->read        = sirdev_raw_read;
+	dev->write       = sirdev_raw_write;
+	dev->set_dtr_rts = dev->drv->set_dtr_rts;
+
+	dev->dongle_drv = drv;
+
+	if (!drv->open  ||  (err=drv->open(dev))!=0)
+		goto out_reject;		/* failed to open driver */
+
+	up(&dongle_list_lock);
+	return 0;
+
+out_reject:
+	dev->dongle_drv = NULL;
+	if (drv->owner)
+		__MOD_DEC_USE_COUNT(drv->owner);
+out_unlock:
+	up(&dongle_list_lock);
+	return err;
+}
+
+int sirdev_put_dongle(struct sir_dev *dev)
+{
+	const struct dongle_driver *drv = dev->dongle_drv;
+
+	if (drv) {
+		if (drv->close)
+			drv->close(dev);		/* close this dongle instance */
+
+		dev->dongle_drv = NULL;			/* unlink the dongle driver */
+
+		if (drv->owner)
+			__MOD_DEC_USE_COUNT(drv->owner);/* decrement driver's module refcount */
+	}
+
+	return 0;
+}

drivers/net/irda/tekram-sir.c

+/*********************************************************************
+ *                
+ * Filename:      tekram.c
+ * Version:       1.3
+ * Description:   Implementation of the Tekram IrMate IR-210B dongle
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Wed Oct 21 20:02:35 1998
+ * Modified at:   Sun Oct 27 22:02:38 2002
+ * Modified by:   Martin Diehl <mad@mdiehl.de>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli,
+ *     Copyright (c) 2002 Martin Diehl,
+ *     All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Troms admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+MODULE_PARM(tekram_delay, "i");
+MODULE_PARM_DESC(tekram_delay, "tekram dongle write complete delay");
+static int tekram_delay = 50;		/* default is 50 ms */
+
+static int tekram_open(struct sir_dev *);
+static int tekram_close(struct sir_dev *);
+static int tekram_change_speed(struct sir_dev *, unsigned);
+static int tekram_reset(struct sir_dev *);
+
+#define TEKRAM_115200 0x00
+#define TEKRAM_57600  0x01
+#define TEKRAM_38400  0x02
+#define TEKRAM_19200  0x03
+#define TEKRAM_9600   0x04
+
+#define TEKRAM_PW     0x10 /* Pulse select bit */
+
+static struct dongle_driver tekram = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "Tekram IR-210B",
+	.type		= IRDA_TEKRAM_DONGLE,
+	.open		= tekram_open,
+	.close		= tekram_close,
+	.reset		= tekram_reset,
+	.set_speed	= tekram_change_speed,
+};
+
+int __init tekram_sir_init(void)
+{
+	if (tekram_delay < 1  ||  tekram_delay>500)
+		tekram_delay = 200;
+	return irda_register_dongle(&tekram);
+}
+
+void __exit tekram_sir_cleanup(void)
+{
+	irda_unregister_dongle(&tekram);
+}
+
+#define TEKRAM_STATE_POWERED	(SIRDEV_STATE_DONGLE_OPEN + 1)
+
+static int tekram_open(struct sir_dev *dev)
+{
+	unsigned delay = 0;
+	unsigned next_state = dev->fsm.substate;
+	struct qos_info *qos = &dev->qos;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	switch(dev->fsm.substate) {
+
+	case SIRDEV_STATE_DONGLE_OPEN:
+		dev->set_dtr_rts(dev, TRUE, TRUE);
+		next_state = TEKRAM_STATE_POWERED;
+		delay = 50;
+		break;
+
+	case TEKRAM_STATE_POWERED:
+		qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+		qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */	
+		irda_qos_bits_to_value(qos);
+		return 0;
+
+	default:
+		ERROR("%s - undefined state\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	dev->fsm.substate = next_state;
+
+	return delay;
+}
+
+static int tekram_close(struct sir_dev *dev)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	/* Power off dongle */
+	dev->set_dtr_rts(dev, FALSE, FALSE);
+
+	return 0;
+}
+
+/*
+ * Function tekram_change_speed (dev, state, speed)
+ *
+ *    Set the speed for the Tekram IRMate 210 type dongle. Warning, this 
+ *    function must be called with a process context!
+ *
+ *    Algorithm
+ *    1. clear DTR 
+ *    2. set RTS, and wait at least 7 us
+ *    3. send Control Byte to the IR-210 through TXD to set new baud rate
+ *       wait until the stop bit of Control Byte is sent (for 9600 baud rate, 
+ *       it takes about 100 msec)
+ *
+ *	[oops, why 100 msec? sending 1 byte (10 bits) takes 1.05 msec
+ *	 - is this probably to compensate for delays in tty layer?]
+ *
+ *    5. clear RTS (return to NORMAL Operation)
+ *    6. wait at least 50 us, new setting (baud rate, etc) takes effect here 
+ *       after
+ */
+
+#define TEKRAM_STATE_WAIT_SPEED	(SIRDEV_STATE_DONGLE_SPEED + 1)
+
+static int tekram_change_speed(struct sir_dev *dev, unsigned speed)
+{
+	unsigned delay = 0;
+	unsigned next_state = dev->fsm.substate;
+	u8 byte;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	switch(dev->fsm.substate) {
+
+	case SIRDEV_STATE_DONGLE_SPEED:
+
+		switch (speed) {
+		default:
+			speed = 9600;
+			/* fall thru */
+		case 9600:
+			byte = TEKRAM_PW|TEKRAM_9600;
+			break;
+		case 19200:
+			byte = TEKRAM_PW|TEKRAM_19200;
+			break;
+		case 38400:
+			byte = TEKRAM_PW|TEKRAM_38400;
+			break;
+		case 57600:
+			byte = TEKRAM_PW|TEKRAM_57600;
+			break;
+		case 115200:
+			byte = TEKRAM_115200;
+			break;
+		}
+
+		/* Set DTR, Clear RTS */
+		dev->set_dtr_rts(dev, TRUE, FALSE);
+	
+		/* Wait at least 7us */
+		udelay(14);
+
+		/* Write control byte */
+		dev->write(dev, &byte, 1);
+		
+		dev->speed = speed;
+
+		next_state = TEKRAM_STATE_WAIT_SPEED;
+		delay = tekram_delay;		/* default: 50 ms */
+		break;
+
+	case TEKRAM_STATE_WAIT_SPEED:
+		/* Set DTR, Set RTS */
+		dev->set_dtr_rts(dev, TRUE, TRUE);
+
+		udelay(50);
+
+		return 0;
+
+	default:
+		ERROR("%s - undefined state\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	dev->fsm.substate = next_state;
+
+	return delay;
+}
+
+/*
+ * Function tekram_reset (driver)
+ *
+ *      This function resets the tekram dongle. Warning, this function 
+ *      must be called with a process context!! 
+ *
+ *      Algorithm:
+ *    	  0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 )
+ *        1. clear RTS 
+ *        2. set DTR, and wait at least 1 ms 
+ *        3. clear DTR to SPACE state, wait at least 50 us for further 
+ *         operation
+ */
+
+
+#define TEKRAM_STATE_WAIT_RESET	(SIRDEV_STATE_DONGLE_RESET + 1)
+
+static int tekram_reset(struct sir_dev *dev)
+{
+	unsigned delay = 0;
+	unsigned next_state = dev->fsm.substate;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	switch(dev->fsm.substate) {
+
+	case SIRDEV_STATE_DONGLE_RESET:
+		/* Clear DTR, Set RTS */
+		dev->set_dtr_rts(dev, FALSE, TRUE); 
+
+		next_state = TEKRAM_STATE_WAIT_RESET;
+		delay = 1;		/* Should sleep 1 ms */
+		break;
+
+	case TEKRAM_STATE_WAIT_RESET:
+		/* Set DTR, Set RTS */
+		dev->set_dtr_rts(dev, TRUE, TRUE);
+	
+		/* Wait at least 50 us */
+		udelay(75);
+
+		return 0;
+
+	default:
+		ERROR("%s - undefined state\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	dev->fsm.substate = next_state;
+
+	return delay;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver");
+MODULE_LICENSE("GPL");
+		
+module_init(tekram_sir_init);
+module_exit(tekram_sir_cleanup);

net/irda/irlap_frame.c

@@ -1280,6 +1280,20 @@ int irlap_driver_rcv(struct sk_buff *skb, struct net_device *dev,
 		return -1;
 	}
 
+	/* We are no longer an "old" protocol, so we need to handle
+	 * share and non linear skbs. This should never happen, so
+	 * we don't need to be clever about it. Jean II */
+	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
+		ERROR("%s: can't clone shared skb!\n", __FUNCTION__);
+		return -1;
+	}
+	if (skb_is_nonlinear(skb))
+		if (skb_linearize(skb, GFP_ATOMIC) != 0) {
+			ERROR("%s: can't linearize skb!\n", __FUNCTION__);
+			dev_kfree_skb(skb);
+			return -1;
+		}
+
 	/* Check if frame is large enough for parsing */
 	if (skb->len < 2) {
 		ERROR("%s: frame to short!\n", __FUNCTION__);

net/irda/irsyms.c

@@ -180,13 +180,16 @@ EXPORT_SYMBOL(irtty_set_packet_mode);
 __u32 irda_debug = IRDA_DEBUG_LEVEL;
 #endif
 
+/* Packet type handler.
+ * Tell the kernel how IrDA packets should be handled.
+ */
 static struct packet_type irda_packet_type = 
 {
-	0,	/* MUTTER ntohs(ETH_P_IRDA),*/
-	NULL,
-	irlap_driver_rcv,
-	NULL,
-	NULL,
+	.type	= __constant_htons(ETH_P_IRDA),
+	.dev	= NULL,			/* Wildcard : All devices */
+	.func	= irlap_driver_rcv,	/* Packet type handler irlap_frame.c */
+	.data	= (void*) 1,		/* Understand shared skbs */
+	//.next	= NULL,
 };
 
 /*
@@ -267,7 +270,6 @@ int __init irda_init(void)
 	irsock_init();
 	
 	/* Add IrDA packet type (Start receiving packets) */
-	irda_packet_type.type = htons(ETH_P_IRDA);
         dev_add_pack(&irda_packet_type);
 
 	/* Notifier for Interface changes */