rcuperf: Change rcuperf to rcuscale

This commit further avoids conflation of rcuperf with the kernel's perf
feature by renaming kernel/rcu/rcuperf.c to kernel/rcu/rcuscale.c, and
also by similarly renaming the functions and variables inside this file.
This has the side effect of changing the names of the kernel boot
parameters, so kernel-parameters.txt and ver_functions.sh are also
updated.  The rcutorture --torture type was also updated from rcuperf
to rcuscale.

[ paulmck: Fix bugs located by Stephen Rothwell. ]
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Documentation/admin-guide/kernel-parameters.txt

@@ -4157,41 +4157,41 @@
 			rcu_node tree with an eye towards determining
 			why a new grace period has not yet started.
 
-	rcuperf.gp_async= [KNL]
+	rcuscale.gp_async= [KNL]
 			Measure performance of asynchronous
 			grace-period primitives such as call_rcu().
 
-	rcuperf.gp_async_max= [KNL]
+	rcuscale.gp_async_max= [KNL]
 			Specify the maximum number of outstanding
 			callbacks per writer thread.  When a writer
 			thread exceeds this limit, it invokes the
 			corresponding flavor of rcu_barrier() to allow
 			previously posted callbacks to drain.
 
-	rcuperf.gp_exp= [KNL]
+	rcuscale.gp_exp= [KNL]
 			Measure performance of expedited synchronous
 			grace-period primitives.
 
-	rcuperf.holdoff= [KNL]
+	rcuscale.holdoff= [KNL]
 			Set test-start holdoff period.  The purpose of
 			this parameter is to delay the start of the
 			test until boot completes in order to avoid
 			interference.
 
-	rcuperf.kfree_rcu_test= [KNL]
+	rcuscale.kfree_rcu_test= [KNL]
 			Set to measure performance of kfree_rcu() flooding.
 
-	rcuperf.kfree_nthreads= [KNL]
+	rcuscale.kfree_nthreads= [KNL]
 			The number of threads running loops of kfree_rcu().
 
-	rcuperf.kfree_alloc_num= [KNL]
+	rcuscale.kfree_alloc_num= [KNL]
 			Number of allocations and frees done in an iteration.
 
-	rcuperf.kfree_loops= [KNL]
-			Number of loops doing rcuperf.kfree_alloc_num number
+	rcuscale.kfree_loops= [KNL]
+			Number of loops doing rcuscale.kfree_alloc_num number
 			of allocations and frees.
 
-	rcuperf.nreaders= [KNL]
+	rcuscale.nreaders= [KNL]
 			Set number of RCU readers.  The value -1 selects
 			N, where N is the number of CPUs.  A value
 			"n" less than -1 selects N-n+1, where N is again
@@ -4200,23 +4200,23 @@
 			A value of "n" less than or equal to -N selects
 			a single reader.
 
-	rcuperf.nwriters= [KNL]
+	rcuscale.nwriters= [KNL]
 			Set number of RCU writers.  The values operate
-			the same as for rcuperf.nreaders.
+			the same as for rcuscale.nreaders.
 			N, where N is the number of CPUs
 
-	rcuperf.perf_type= [KNL]
+	rcuscale.perf_type= [KNL]
 			Specify the RCU implementation to test.
 
-	rcuperf.shutdown= [KNL]
+	rcuscale.shutdown= [KNL]
 			Shut the system down after performance tests
 			complete.  This is useful for hands-off automated
 			testing.
 
-	rcuperf.verbose= [KNL]
+	rcuscale.verbose= [KNL]
 			Enable additional printk() statements.
 
-	rcuperf.writer_holdoff= [KNL]
+	rcuscale.writer_holdoff= [KNL]
 			Write-side holdoff between grace periods,
 			in microseconds.  The default of zero says
 			no holdoff.
@@ -4490,8 +4490,8 @@
 	refscale.shutdown= [KNL]
 			Shut down the system at the end of the performance
 			test.  This defaults to 1 (shut it down) when
-			rcuperf is built into the kernel and to 0 (leave
-			it running) when rcuperf is built as a module.
+			refscale is built into the kernel and to 0 (leave
+			it running) when refscale is built as a module.
 
 	refscale.verbose= [KNL]
 			Enable additional printk() statements.

MAINTAINERS

@@ -17510,8 +17510,9 @@ S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
 F:	Documentation/RCU/torture.rst
 F:	kernel/locking/locktorture.c
-F:	kernel/rcu/rcuperf.c
+F:	kernel/rcu/rcuscale.c
 F:	kernel/rcu/rcutorture.c
+F:	kernel/rcu/refscale.c
 F:	kernel/torture.c
 
 TOSHIBA ACPI EXTRAS DRIVER

kernel/rcu/Kconfig.debug

@@ -23,7 +23,7 @@ config TORTURE_TEST
 	tristate
 	default n
 
-config RCU_PERF_TEST
+config RCU_SCALE_TEST
 	tristate "performance tests for RCU"
 	depends on DEBUG_KERNEL
 	select TORTURE_TEST

kernel/rcu/Makefile

@@ -11,7 +11,7 @@ obj-y += update.o sync.o
 obj-$(CONFIG_TREE_SRCU) += srcutree.o
 obj-$(CONFIG_TINY_SRCU) += srcutiny.o
 obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
-obj-$(CONFIG_RCU_PERF_TEST) += rcuperf.o
+obj-$(CONFIG_RCU_SCALE_TEST) += rcuscale.o
 obj-$(CONFIG_RCU_REF_SCALE_TEST) += refscale.o
 obj-$(CONFIG_TREE_RCU) += tree.o
 obj-$(CONFIG_TINY_RCU) += tiny.o

tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh → tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale-ftrace.sh

 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0+
 #
-# Analyze a given results directory for rcuperf performance measurements,
+# Analyze a given results directory for rcuscale performance measurements,
 # looking for ftrace data.  Exits with 0 if data was found, analyzed, and
-# printed.  Intended to be invoked from kvm-recheck-rcuperf.sh after
+# printed.  Intended to be invoked from kvm-recheck-rcuscale.sh after
 # argument checking.
 #
-# Usage: kvm-recheck-rcuperf-ftrace.sh resdir
+# Usage: kvm-recheck-rcuscale-ftrace.sh resdir
 #
 # Copyright (C) IBM Corporation, 2016
 #

tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh → tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuscale.sh

 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0+
 #
-# Analyze a given results directory for rcuperf performance measurements.
+# Analyze a given results directory for rcuscale scalability measurements.
 #
-# Usage: kvm-recheck-rcuperf.sh resdir
+# Usage: kvm-recheck-rcuscale.sh resdir
 #
 # Copyright (C) IBM Corporation, 2016
 #
@@ -20,7 +20,7 @@ fi
 PATH=`pwd`/tools/testing/selftests/rcutorture/bin:$PATH; export PATH
 . functions.sh
 
-if kvm-recheck-rcuperf-ftrace.sh $i
+if kvm-recheck-rcuscale-ftrace.sh $i
 then
 	# ftrace data was successfully analyzed, call it good!
 	exit 0
@@ -30,12 +30,12 @@ configfile=`echo $i | sed -e 's/^.*\///'`
 
 sed -e 's/^\[[^]]*]//' < $i/console.log |
 awk '
-/-perf: .* gps: .* batches:/ {
+/-scale: .* gps: .* batches:/ {
 	ngps = $9;
 	nbatches = $11;
 }
 
-/-perf: .*writer-duration/ {
+/-scale: .*writer-duration/ {
 	gptimes[++n] = $5 / 1000.;
 	sum += $5 / 1000.;
 }
@@ -43,7 +43,7 @@ awk '
 END {
 	newNR = asort(gptimes);
 	if (newNR <= 0) {
-		print "No rcuperf records found???"
+		print "No rcuscale records found???"
 		exit;
 	}
 	pct50 = int(newNR * 50 / 100);
@@ -79,5 +79,5 @@ END {
 	print "99th percentile grace-period duration: " gptimes[pct99];
 	print "Maximum grace-period duration: " gptimes[newNR];
 	print "Grace periods: " ngps + 0 " Batches: " nbatches + 0 " Ratio: " ngps / nbatches;
-	print "Computed from rcuperf printk output.";
+	print "Computed from rcuscale printk output.";
 }'

tools/testing/selftests/rcutorture/bin/kvm.sh

@@ -65,7 +65,7 @@ usage () {
 	echo "       --qemu-args qemu-arguments"
 	echo "       --qemu-cmd qemu-system-..."
 	echo "       --results absolute-pathname"
-	echo "       --torture rcu"
+	echo "       --torture lock|rcu|rcuscale|refscale|scf"
 	echo "       --trust-make"
 	exit 1
 }
@@ -184,13 +184,13 @@ do
 		shift
 		;;
 	--torture)
-		checkarg --torture "(suite name)" "$#" "$2" '^\(lock\|rcu\|rcuperf\|refscale\|scf\)$' '^--'
+		checkarg --torture "(suite name)" "$#" "$2" '^\(lock\|rcu\|rcuscale\|refscale\|scf\)$' '^--'
 		TORTURE_SUITE=$2
 		shift
-		if test "$TORTURE_SUITE" = rcuperf || test "$TORTURE_SUITE" = refscale
+		if test "$TORTURE_SUITE" = rcuscale || test "$TORTURE_SUITE" = refscale
 		then
 			# If you really want jitter for refscale or
-			# rcuperf, specify it after specifying the rcuperf
+			# rcuscale, specify it after specifying the rcuscale
 			# or the refscale.  (But why jitter in these cases?)
 			jitter=0
 		fi

tools/testing/selftests/rcutorture/bin/parse-console.sh

@@ -33,8 +33,8 @@ then
 fi
 cat /dev/null > $file.diags
 
-# Check for proper termination, except for rcuperf and refscale.
-if test "$TORTURE_SUITE" != rcuperf && test "$TORTURE_SUITE" != refscale
+# Check for proper termination, except for rcuscale and refscale.
+if test "$TORTURE_SUITE" != rcuscale && test "$TORTURE_SUITE" != refscale
 then
 	# check for abject failure
 

tools/testing/selftests/rcutorture/configs/rcuperf/CFcommon → tools/testing/selftests/rcutorture/configs/rcuscale/CFcommon

-CONFIG_RCU_PERF_TEST=y
+CONFIG_RCU_SCALE_TEST=y
 CONFIG_PRINTK_TIME=y

tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh → tools/testing/selftests/rcutorture/configs/rcuscale/ver_functions.sh

@@ -11,6 +11,6 @@
 #
 # Adds per-version torture-module parameters to kernels supporting them.
 per_version_boot_params () {
-	echo $1 rcuperf.shutdown=1 \
-		rcuperf.verbose=1
+	echo $1 rcuscale.shutdown=1 \
+		rcuscale.verbose=1
 }