Commit 4f25eb85 authored by Mike Frysinger's avatar Mike Frysinger Committed by Bryan Wu

Blackfin arch: split board selection off into mach subdirs

Signed-off-by: default avatarMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: default avatarBryan Wu <bryan.wu@analog.com>
parent d07f4380
......@@ -221,95 +221,6 @@ config BFIN_SINGLE_CORE
depends on !BFIN_DUAL_CORE
default y
choice
prompt "System type"
default BFIN533_STAMP
help
Do NOT change the board here. Please use the top level
configuration to ensure that all the other settings are
correct.
config BFIN527_EZKIT
bool "BF527-EZKIT"
depends on (BF522 || BF525 || BF527)
help
BF533-EZKIT-LITE board Support.
config BFIN533_EZKIT
bool "BF533-EZKIT"
depends on (BF533 || BF532 || BF531)
help
BF533-EZKIT-LITE board Support.
config BFIN533_STAMP
bool "BF533-STAMP"
depends on (BF533 || BF532 || BF531)
help
BF533-STAMP board Support.
config BFIN537_STAMP
bool "BF537-STAMP"
depends on (BF537 || BF536 || BF534)
help
BF537-STAMP board Support.
config BFIN533_BLUETECHNIX_CM
bool "Bluetechnix CM-BF533"
depends on (BF533)
help
CM-BF533 support for EVAL- and DEV-Board.
config BFIN537_BLUETECHNIX_CM
bool "Bluetechnix CM-BF537"
depends on (BF537)
help
CM-BF537 support for EVAL- and DEV-Board.
config BFIN548_EZKIT
bool "BF548-EZKIT"
depends on (BF548 || BF549)
help
BFIN548-EZKIT board Support.
config BFIN561_BLUETECHNIX_CM
bool "Bluetechnix CM-BF561"
depends on (BF561)
help
CM-BF561 support for EVAL- and DEV-Board.
config BFIN561_EZKIT
bool "BF561-EZKIT"
depends on (BF561)
help
BF561-EZKIT-LITE board Support.
config BFIN561_TEPLA
bool "BF561-TEPLA"
depends on (BF561)
help
BF561-TEPLA board Support.
config PNAV10
bool "PNAV 1.0 board"
depends on (BF537)
help
PNAV 1.0 board Support.
config H8606_HVSISTEMAS
bool "HV Sistemas H8606"
depends on (BF532)
help
HV Sistemas H8606 board support.
config GENERIC_BOARD
bool "Custom"
depends on (BF537 || BF536 \
|| BF534 || BF561 || BF535 || BF533 || BF532 || BF531)
help
GENERIC or Custom board Support.
endchoice
config MEM_GENERIC_BOARD
bool
depends on GENERIC_BOARD
......
if (BF52x)
source "arch/blackfin/mach-bf527/boards/Kconfig"
menu "BF527 Specific Configuration"
comment "Alternative Multiplexing Scheme"
......
choice
prompt "System type"
default BFIN527_EZKIT
help
Select your board!
config BFIN527_EZKIT
bool "BF527-EZKIT"
help
BF527-EZKIT-LITE board support.
endchoice
#
# arch/blackfin/mach-bf532/boards/Makefile
# arch/blackfin/mach-bf527/boards/Makefile
#
obj-y += eth_mac.o
obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o
obj-y += eth_mac.o
obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o
if (BF533 || BF532 || BF531)
source "arch/blackfin/mach-bf533/boards/Kconfig"
menu "BF533/2/1 Specific Configuration"
comment "Interrupt Priority Assignment"
......
choice
prompt "System type"
default BFIN533_STAMP
help
Select your board!
config BFIN533_EZKIT
bool "BF533-EZKIT"
help
BF533-EZKIT-LITE board support.
config BFIN533_STAMP
bool "BF533-STAMP"
help
BF533-STAMP board support.
config BFIN533_BLUETECHNIX_CM
bool "Bluetechnix CM-BF533"
depends on (BF533)
help
CM-BF533 support for EVAL- and DEV-Board.
config H8606_HVSISTEMAS
bool "HV Sistemas H8606"
depends on (BF532)
help
HV Sistemas H8606 board support.
config GENERIC_BF533_BOARD
bool "Generic"
help
Generic or Custom board support.
endchoice
......@@ -2,7 +2,7 @@
# arch/blackfin/mach-bf533/boards/Makefile
#
obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
......
if (BF537 || BF534 || BF536)
source "arch/blackfin/mach-bf537/boards/Kconfig"
menu "BF537 Specific Configuration"
comment "Interrupt Priority Assignment"
......
choice
prompt "System type"
default BFIN537_STAMP
help
Select your board!
config BFIN537_STAMP
bool "BF537-STAMP"
help
BF537-STAMP board support.
config BFIN537_BLUETECHNIX_CM
bool "Bluetechnix CM-BF537"
depends on (BF537)
help
CM-BF537 support for EVAL- and DEV-Board.
config PNAV10
bool "PNAV board"
depends on (BF537)
help
PNAV board support.
config GENERIC_BF537_BOARD
bool "Generic"
help
Generic or Custom board support.
endchoice
......@@ -2,8 +2,8 @@
# arch/blackfin/mach-bf537/boards/Makefile
#
obj-y += eth_mac.o
obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
obj-y += eth_mac.o
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
if (BF54x)
source "arch/blackfin/mach-bf548/boards/Kconfig"
menu "BF548 Specific Configuration"
config DEB_DMA_URGENT
......
choice
prompt "System type"
default BFIN548_EZKIT
help
Select your board!
config BFIN548_EZKIT
bool "BF548-EZKIT"
help
BFIN548-EZKIT board support.
endchoice
......@@ -2,4 +2,4 @@
# arch/blackfin/mach-bf548/boards/Makefile
#
obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
if BF561
if (BF561)
source "arch/blackfin/mach-bf561/boards/Kconfig"
menu "BF561 Specific Configuration"
......
choice
prompt "System type"
default BFIN561_EZKIT
help
Select your board!
config BFIN561_EZKIT
bool "BF561-EZKIT"
help
BF561-EZKIT-LITE board support.
config BFIN561_TEPLA
bool "BF561-TEPLA"
help
BF561-TEPLA board support.
config BFIN561_BLUETECHNIX_CM
bool "Bluetechnix CM-BF561"
help
CM-BF561 support for EVAL- and DEV-Board.
config GENERIC_BF561_BOARD
bool "Generic"
help
Generic or Custom board support.
endchoice
......@@ -2,7 +2,7 @@
# arch/blackfin/mach-bf561/boards/Makefile
#
obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment