Commit 4f2a8f58 authored by Joel Stanley's avatar Joel Stanley

drm: Add ASPEED GFX driver

This driver is for the ASPEED BMC SoC's GFX display hardware. This
driver runs on the ARM based BMC systems, unlike the ast driver which
runs on a host CPU and is is for a PCI graphics device.
Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
Acked-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: default avatarNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: default avatarSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403001909.31637-3-joel@jms.id.au
parent eff9f244
...@@ -339,6 +339,8 @@ source "drivers/gpu/drm/vboxvideo/Kconfig" ...@@ -339,6 +339,8 @@ source "drivers/gpu/drm/vboxvideo/Kconfig"
source "drivers/gpu/drm/lima/Kconfig" source "drivers/gpu/drm/lima/Kconfig"
source "drivers/gpu/drm/aspeed/Kconfig"
# Keep legacy drivers last # Keep legacy drivers last
menuconfig DRM_LEGACY menuconfig DRM_LEGACY
......
...@@ -112,3 +112,4 @@ obj-$(CONFIG_DRM_TVE200) += tve200/ ...@@ -112,3 +112,4 @@ obj-$(CONFIG_DRM_TVE200) += tve200/
obj-$(CONFIG_DRM_XEN) += xen/ obj-$(CONFIG_DRM_XEN) += xen/
obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/ obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/
obj-$(CONFIG_DRM_LIMA) += lima/ obj-$(CONFIG_DRM_LIMA) += lima/
obj-$(CONFIG_DRM_ASPEED_GFX) += aspeed/
config DRM_ASPEED_GFX
tristate "ASPEED BMC Display Controller"
depends on DRM && OF
select DRM_KMS_HELPER
select DRM_KMS_CMA_HELPER
select DRM_PANEL
select DMA_CMA
select CMA
select MFD_SYSCON
help
Chose this option if you have an ASPEED AST2500 SOC Display
Controller (aka GFX).
If M is selected this module will be called aspeed_gfx.
aspeed_gfx-y := aspeed_gfx_drv.o aspeed_gfx_crtc.o aspeed_gfx_out.o
obj-$(CONFIG_DRM_ASPEED_GFX) += aspeed_gfx.o
/* SPDX-License-Identifier: GPL-2.0+ */
/* Copyright 2018 IBM Corporation */
#include <drm/drm_device.h>
#include <drm/drm_simple_kms_helper.h>
struct aspeed_gfx {
void __iomem *base;
struct clk *clk;
struct reset_control *rst;
struct regmap *scu;
struct drm_simple_display_pipe pipe;
struct drm_connector connector;
struct drm_fbdev_cma *fbdev;
};
int aspeed_gfx_create_pipe(struct drm_device *drm);
int aspeed_gfx_create_output(struct drm_device *drm);
#define CRT_CTRL1 0x60 /* CRT Control I */
#define CRT_CTRL2 0x64 /* CRT Control II */
#define CRT_STATUS 0x68 /* CRT Status */
#define CRT_MISC 0x6c /* CRT Misc Setting */
#define CRT_HORIZ0 0x70 /* CRT Horizontal Total & Display Enable End */
#define CRT_HORIZ1 0x74 /* CRT Horizontal Retrace Start & End */
#define CRT_VERT0 0x78 /* CRT Vertical Total & Display Enable End */
#define CRT_VERT1 0x7C /* CRT Vertical Retrace Start & End */
#define CRT_ADDR 0x80 /* CRT Display Starting Address */
#define CRT_OFFSET 0x84 /* CRT Display Offset & Terminal Count */
#define CRT_THROD 0x88 /* CRT Threshold */
#define CRT_XSCALE 0x8C /* CRT Scaling-Up Factor */
#define CRT_CURSOR0 0x90 /* CRT Hardware Cursor X & Y Offset */
#define CRT_CURSOR1 0x94 /* CRT Hardware Cursor X & Y Position */
#define CRT_CURSOR2 0x98 /* CRT Hardware Cursor Pattern Address */
#define CRT_9C 0x9C
#define CRT_OSD_H 0xA0 /* CRT OSD Horizontal Start/End */
#define CRT_OSD_V 0xA4 /* CRT OSD Vertical Start/End */
#define CRT_OSD_ADDR 0xA8 /* CRT OSD Pattern Address */
#define CRT_OSD_DISP 0xAC /* CRT OSD Offset */
#define CRT_OSD_THRESH 0xB0 /* CRT OSD Threshold & Alpha */
#define CRT_B4 0xB4
#define CRT_STS_V 0xB8 /* CRT Status V */
#define CRT_SCRATCH 0xBC /* Scratchpad */
#define CRT_BB0_ADDR 0xD0 /* CRT Display BB0 Starting Address */
#define CRT_BB1_ADDR 0xD4 /* CRT Display BB1 Starting Address */
#define CRT_BB_COUNT 0xD8 /* CRT Display BB Terminal Count */
#define OSD_COLOR1 0xE0 /* OSD Color Palette Index 1 & 0 */
#define OSD_COLOR2 0xE4 /* OSD Color Palette Index 3 & 2 */
#define OSD_COLOR3 0xE8 /* OSD Color Palette Index 5 & 4 */
#define OSD_COLOR4 0xEC /* OSD Color Palette Index 7 & 6 */
#define OSD_COLOR5 0xF0 /* OSD Color Palette Index 9 & 8 */
#define OSD_COLOR6 0xF4 /* OSD Color Palette Index 11 & 10 */
#define OSD_COLOR7 0xF8 /* OSD Color Palette Index 13 & 12 */
#define OSD_COLOR8 0xFC /* OSD Color Palette Index 15 & 14 */
/* CTRL1 */
#define CRT_CTRL_EN BIT(0)
#define CRT_CTRL_HW_CURSOR_EN BIT(1)
#define CRT_CTRL_OSD_EN BIT(2)
#define CRT_CTRL_INTERLACED BIT(3)
#define CRT_CTRL_COLOR_RGB565 (0 << 7)
#define CRT_CTRL_COLOR_YUV444 (1 << 7)
#define CRT_CTRL_COLOR_XRGB8888 (2 << 7)
#define CRT_CTRL_COLOR_RGB888 (3 << 7)
#define CRT_CTRL_COLOR_YUV444_2RGB (5 << 7)
#define CRT_CTRL_COLOR_YUV422 (7 << 7)
#define CRT_CTRL_COLOR_MASK GENMASK(9, 7)
#define CRT_CTRL_HSYNC_NEGATIVE BIT(16)
#define CRT_CTRL_VSYNC_NEGATIVE BIT(17)
#define CRT_CTRL_VERTICAL_INTR_EN BIT(30)
#define CRT_CTRL_VERTICAL_INTR_STS BIT(31)
/* CTRL2 */
#define CRT_CTRL_DAC_EN BIT(0)
#define CRT_CTRL_VBLANK_LINE(x) (((x) << 20) & CRT_CTRL_VBLANK_LINE_MASK)
#define CRT_CTRL_VBLANK_LINE_MASK GENMASK(20, 31)
/* CRT_HORIZ0 */
#define CRT_H_TOTAL(x) (x)
#define CRT_H_DE(x) ((x) << 16)
/* CRT_HORIZ1 */
#define CRT_H_RS_START(x) (x)
#define CRT_H_RS_END(x) ((x) << 16)
/* CRT_VIRT0 */
#define CRT_V_TOTAL(x) (x)
#define CRT_V_DE(x) ((x) << 16)
/* CRT_VIRT1 */
#define CRT_V_RS_START(x) (x)
#define CRT_V_RS_END(x) ((x) << 16)
/* CRT_OFFSET */
#define CRT_DISP_OFFSET(x) (x)
#define CRT_TERM_COUNT(x) ((x) << 16)
/* CRT_THROD */
#define CRT_THROD_LOW(x) (x)
#define CRT_THROD_HIGH(x) ((x) << 8)
/* Default Threshold Seting */
#define G5_CRT_THROD_VAL (CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3C))
// SPDX-License-Identifier: GPL-2.0+
// Copyright 2018 IBM Corporation
#include <linux/clk.h>
#include <linux/reset.h>
#include <linux/regmap.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_device.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_panel.h>
#include <drm/drm_simple_kms_helper.h>
#include <drm/drm_vblank.h>
#include "aspeed_gfx.h"
static struct aspeed_gfx *
drm_pipe_to_aspeed_gfx(struct drm_simple_display_pipe *pipe)
{
return container_of(pipe, struct aspeed_gfx, pipe);
}
static int aspeed_gfx_set_pixel_fmt(struct aspeed_gfx *priv, u32 *bpp)
{
struct drm_crtc *crtc = &priv->pipe.crtc;
struct drm_device *drm = crtc->dev;
const u32 format = crtc->primary->state->fb->format->format;
u32 ctrl1;
ctrl1 = readl(priv->base + CRT_CTRL1);
ctrl1 &= ~CRT_CTRL_COLOR_MASK;
switch (format) {
case DRM_FORMAT_RGB565:
dev_dbg(drm->dev, "Setting up RGB565 mode\n");
ctrl1 |= CRT_CTRL_COLOR_RGB565;
*bpp = 16;
break;
case DRM_FORMAT_XRGB8888:
dev_dbg(drm->dev, "Setting up XRGB8888 mode\n");
ctrl1 |= CRT_CTRL_COLOR_XRGB8888;
*bpp = 32;
break;
default:
dev_err(drm->dev, "Unhandled pixel format %08x\n", format);
return -EINVAL;
}
writel(ctrl1, priv->base + CRT_CTRL1);
return 0;
}
static void aspeed_gfx_enable_controller(struct aspeed_gfx *priv)
{
u32 ctrl1 = readl(priv->base + CRT_CTRL1);
u32 ctrl2 = readl(priv->base + CRT_CTRL2);
/* SCU2C: set DAC source for display output to Graphics CRT (GFX) */
regmap_update_bits(priv->scu, 0x2c, BIT(16), BIT(16));
writel(ctrl1 | CRT_CTRL_EN, priv->base + CRT_CTRL1);
writel(ctrl2 | CRT_CTRL_DAC_EN, priv->base + CRT_CTRL2);
}
static void aspeed_gfx_disable_controller(struct aspeed_gfx *priv)
{
u32 ctrl1 = readl(priv->base + CRT_CTRL1);
u32 ctrl2 = readl(priv->base + CRT_CTRL2);
writel(ctrl1 & ~CRT_CTRL_EN, priv->base + CRT_CTRL1);
writel(ctrl2 & ~CRT_CTRL_DAC_EN, priv->base + CRT_CTRL2);
regmap_update_bits(priv->scu, 0x2c, BIT(16), 0);
}
static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
{
struct drm_display_mode *m = &priv->pipe.crtc.state->adjusted_mode;
u32 ctrl1, d_offset, t_count, bpp;
int err;
err = aspeed_gfx_set_pixel_fmt(priv, &bpp);
if (err)
return;
#if 0
/* TODO: we have only been able to test with the 40MHz USB clock. The
* clock is fixed, so we cannot adjust it here. */
clk_set_rate(priv->pixel_clk, m->crtc_clock * 1000);
#endif
ctrl1 = readl(priv->base + CRT_CTRL1);
ctrl1 &= ~(CRT_CTRL_INTERLACED |
CRT_CTRL_HSYNC_NEGATIVE |
CRT_CTRL_VSYNC_NEGATIVE);
if (m->flags & DRM_MODE_FLAG_INTERLACE)
ctrl1 |= CRT_CTRL_INTERLACED;
if (!(m->flags & DRM_MODE_FLAG_PHSYNC))
ctrl1 |= CRT_CTRL_HSYNC_NEGATIVE;
if (!(m->flags & DRM_MODE_FLAG_PVSYNC))
ctrl1 |= CRT_CTRL_VSYNC_NEGATIVE;
writel(ctrl1, priv->base + CRT_CTRL1);
/* Horizontal timing */
writel(CRT_H_TOTAL(m->htotal - 1) | CRT_H_DE(m->hdisplay - 1),
priv->base + CRT_HORIZ0);
writel(CRT_H_RS_START(m->hsync_start - 1) | CRT_H_RS_END(m->hsync_end),
priv->base + CRT_HORIZ1);
/* Vertical timing */
writel(CRT_V_TOTAL(m->vtotal - 1) | CRT_V_DE(m->vdisplay - 1),
priv->base + CRT_VERT0);
writel(CRT_V_RS_START(m->vsync_start) | CRT_V_RS_END(m->vsync_end),
priv->base + CRT_VERT1);
/*
* Display Offset: address difference between consecutive scan lines
* Terminal Count: memory size of one scan line
*/
d_offset = m->hdisplay * bpp / 8;
t_count = (m->hdisplay * bpp + 127) / 128;
writel(CRT_DISP_OFFSET(d_offset) | CRT_TERM_COUNT(t_count),
priv->base + CRT_OFFSET);
/*
* Threshold: FIFO thresholds of refill and stop (16 byte chunks
* per line, rounded up)
*/
writel(G5_CRT_THROD_VAL, priv->base + CRT_THROD);
}
static void aspeed_gfx_pipe_enable(struct drm_simple_display_pipe *pipe,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
{
struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
struct drm_crtc *crtc = &pipe->crtc;
aspeed_gfx_crtc_mode_set_nofb(priv);
aspeed_gfx_enable_controller(priv);
drm_crtc_vblank_on(crtc);
}
static void aspeed_gfx_pipe_disable(struct drm_simple_display_pipe *pipe)
{
struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
struct drm_crtc *crtc = &pipe->crtc;
drm_crtc_vblank_off(crtc);
aspeed_gfx_disable_controller(priv);
}
static void aspeed_gfx_pipe_update(struct drm_simple_display_pipe *pipe,
struct drm_plane_state *plane_state)
{
struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
struct drm_crtc *crtc = &pipe->crtc;
struct drm_framebuffer *fb = pipe->plane.state->fb;
struct drm_pending_vblank_event *event;
struct drm_gem_cma_object *gem;
spin_lock_irq(&crtc->dev->event_lock);
event = crtc->state->event;
if (event) {
crtc->state->event = NULL;
if (drm_crtc_vblank_get(crtc) == 0)
drm_crtc_arm_vblank_event(crtc, event);
else
drm_crtc_send_vblank_event(crtc, event);
}
spin_unlock_irq(&crtc->dev->event_lock);
if (!fb)
return;
gem = drm_fb_cma_get_gem_obj(fb, 0);
if (!gem)
return;
writel(gem->paddr, priv->base + CRT_ADDR);
}
static int aspeed_gfx_enable_vblank(struct drm_simple_display_pipe *pipe)
{
struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
u32 reg = readl(priv->base + CRT_CTRL1);
/* Clear pending VBLANK IRQ */
writel(reg | CRT_CTRL_VERTICAL_INTR_STS, priv->base + CRT_CTRL1);
reg |= CRT_CTRL_VERTICAL_INTR_EN;
writel(reg, priv->base + CRT_CTRL1);
return 0;
}
static void aspeed_gfx_disable_vblank(struct drm_simple_display_pipe *pipe)
{
struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
u32 reg = readl(priv->base + CRT_CTRL1);
reg &= ~CRT_CTRL_VERTICAL_INTR_EN;
writel(reg, priv->base + CRT_CTRL1);
/* Clear pending VBLANK IRQ */
writel(reg | CRT_CTRL_VERTICAL_INTR_STS, priv->base + CRT_CTRL1);
}
static struct drm_simple_display_pipe_funcs aspeed_gfx_funcs = {
.enable = aspeed_gfx_pipe_enable,
.disable = aspeed_gfx_pipe_disable,
.update = aspeed_gfx_pipe_update,
.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
.enable_vblank = aspeed_gfx_enable_vblank,
.disable_vblank = aspeed_gfx_disable_vblank,
};
static const uint32_t aspeed_gfx_formats[] = {
DRM_FORMAT_XRGB8888,
DRM_FORMAT_RGB565,
};
int aspeed_gfx_create_pipe(struct drm_device *drm)
{
struct aspeed_gfx *priv = drm->dev_private;
return drm_simple_display_pipe_init(drm, &priv->pipe, &aspeed_gfx_funcs,
aspeed_gfx_formats,
ARRAY_SIZE(aspeed_gfx_formats),
NULL,
&priv->connector);
}
// SPDX-License-Identifier: GPL-2.0+
// Copyright 2018 IBM Corporation
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/irq.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_device.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_simple_kms_helper.h>
#include <drm/drm_vblank.h>
#include <drm/drm_drv.h>
#include "aspeed_gfx.h"
/**
* DOC: ASPEED GFX Driver
*
* This driver is for the ASPEED BMC SoC's 'GFX' display hardware, also called
* the 'SOC Display Controller' in the datasheet. This driver runs on the ARM
* based BMC systems, unlike the ast driver which runs on a host CPU and is for
* a PCIe graphics device.
*
* The AST2500 supports a total of 3 output paths:
*
* 1. VGA output, the output target can choose either or both to the DAC
* or DVO interface.
*
* 2. Graphics CRT output, the output target can choose either or both to
* the DAC or DVO interface.
*
* 3. Video input from DVO, the video input can be used for video engine
* capture or DAC display output.
*
* Output options are selected in SCU2C.
*
* The "VGA mode" device is the PCI attached controller. The "Graphics CRT"
* is the ARM's internal display controller.
*
* The driver only supports a simple configuration consisting of a 40MHz
* pixel clock, fixed by hardware limitations, and the VGA output path.
*
* The driver was written with the 'AST2500 Software Programming Guide' v17,
* which is available under NDA from ASPEED.
*/
static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
.fb_create = drm_gem_fb_create,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
};
static void aspeed_gfx_setup_mode_config(struct drm_device *drm)
{
drm_mode_config_init(drm);
drm->mode_config.min_width = 0;
drm->mode_config.min_height = 0;
drm->mode_config.max_width = 800;
drm->mode_config.max_height = 600;
drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
}
static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
{
struct drm_device *drm = data;
struct aspeed_gfx *priv = drm->dev_private;
u32 reg;
reg = readl(priv->base + CRT_CTRL1);
if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
drm_crtc_handle_vblank(&priv->pipe.crtc);
writel(reg, priv->base + CRT_CTRL1);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static int aspeed_gfx_load(struct drm_device *drm)
{
struct platform_device *pdev = to_platform_device(drm->dev);
struct aspeed_gfx *priv;
struct resource *res;
int ret;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
drm->dev_private = priv;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(drm->dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
priv->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2500-scu");
if (IS_ERR(priv->scu)) {
dev_err(&pdev->dev, "failed to find SCU regmap\n");
return PTR_ERR(priv->scu);
}
ret = of_reserved_mem_device_init(drm->dev);
if (ret) {
dev_err(&pdev->dev,
"failed to initialize reserved mem: %d\n", ret);
return ret;
}
ret = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32));
if (ret) {
dev_err(&pdev->dev, "failed to set DMA mask: %d\n", ret);
return ret;
}
priv->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (IS_ERR(priv->rst)) {
dev_err(&pdev->dev,
"missing or invalid reset controller device tree entry");
return PTR_ERR(priv->rst);
}
reset_control_deassert(priv->rst);
priv->clk = devm_clk_get(drm->dev, NULL);
if (IS_ERR(priv->clk)) {
dev_err(&pdev->dev,
"missing or invalid clk device tree entry");
return PTR_ERR(priv->clk);
}
clk_prepare_enable(priv->clk);
/* Sanitize control registers */
writel(0, priv->base + CRT_CTRL1);
writel(0, priv->base + CRT_CTRL2);
aspeed_gfx_setup_mode_config(drm);
ret = drm_vblank_init(drm, 1);
if (ret < 0) {
dev_err(drm->dev, "Failed to initialise vblank\n");
return ret;
}
ret = aspeed_gfx_create_output(drm);
if (ret < 0) {
dev_err(drm->dev, "Failed to create outputs\n");
return ret;
}
ret = aspeed_gfx_create_pipe(drm);
if (ret < 0) {
dev_err(drm->dev, "Cannot setup simple display pipe\n");
return ret;
}
ret = devm_request_irq(drm->dev, platform_get_irq(pdev, 0),
aspeed_gfx_irq_handler, 0, "aspeed gfx", drm);
if (ret < 0) {
dev_err(drm->dev, "Failed to install IRQ handler\n");
return ret;
}
drm_mode_config_reset(drm);
drm_fbdev_generic_setup(drm, 32);
return 0;
}
static void aspeed_gfx_unload(struct drm_device *drm)
{
drm_kms_helper_poll_fini(drm);
drm_mode_config_cleanup(drm);
drm->dev_private = NULL;
}
DEFINE_DRM_GEM_CMA_FOPS(fops);
static struct drm_driver aspeed_gfx_driver = {
.driver_features = DRIVER_GEM | DRIVER_MODESET |
DRIVER_PRIME | DRIVER_ATOMIC,
.gem_create_object = drm_cma_gem_create_object_default_funcs,
.dumb_create = drm_gem_cma_dumb_create,
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
.gem_prime_mmap = drm_gem_prime_mmap,
.fops = &fops,
.name = "aspeed-gfx-drm",
.desc = "ASPEED GFX DRM",
.date = "20180319",
.major = 1,
.minor = 0,
};
static const struct of_device_id aspeed_gfx_match[] = {
{ .compatible = "aspeed,ast2500-gfx" },
{ }
};
static int aspeed_gfx_probe(struct platform_device *pdev)
{
struct drm_device *drm;
int ret;
drm = drm_dev_alloc(&aspeed_gfx_driver, &pdev->dev);
if (IS_ERR(drm))
return PTR_ERR(drm);
ret = aspeed_gfx_load(drm);
if (ret)
goto err_free;
ret = drm_dev_register(drm, 0);
if (ret)
goto err_unload;
return 0;
err_unload:
aspeed_gfx_unload(drm);
err_free:
drm_dev_put(drm);
return ret;
}
static int aspeed_gfx_remove(struct platform_device *pdev)
{
struct drm_device *drm = platform_get_drvdata(pdev);
drm_dev_unregister(drm);
aspeed_gfx_unload(drm);
drm_dev_put(drm);
return 0;
}
static struct platform_driver aspeed_gfx_platform_driver = {
.probe = aspeed_gfx_probe,
.remove = aspeed_gfx_remove,
.driver = {
.name = "aspeed_gfx",
.of_match_table = aspeed_gfx_match,
},
};
module_platform_driver(aspeed_gfx_platform_driver);
MODULE_AUTHOR("Joel Stanley <joel@jms.id.au>");
MODULE_DESCRIPTION("ASPEED BMC DRM/KMS driver");
MODULE_LICENSE("GPL");
// SPDX-License-Identifier: GPL-2.0+
// Copyright 2018 IBM Corporation
#include <drm/drm_atomic_helper.h>
#include <drm/drm_connector.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_probe_helper.h>
#include "aspeed_gfx.h"
static int aspeed_gfx_get_modes(struct drm_connector *connector)
{
return drm_add_modes_noedid(connector, 800, 600);
}
static const struct
drm_connector_helper_funcs aspeed_gfx_connector_helper_funcs = {
.get_modes = aspeed_gfx_get_modes,
};
static const struct drm_connector_funcs aspeed_gfx_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
int aspeed_gfx_create_output(struct drm_device *drm)
{
struct aspeed_gfx *priv = drm->dev_private;
int ret;
priv->connector.dpms = DRM_MODE_DPMS_OFF;
priv->connector.polled = 0;
drm_connector_helper_add(&priv->connector,
&aspeed_gfx_connector_helper_funcs);
ret = drm_connector_init(drm, &priv->connector,
&aspeed_gfx_connector_funcs,
DRM_MODE_CONNECTOR_Unknown);
return ret;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment