drm/i915: Make HAS_DDI and HAS_PCH_LPT_LP only take dev_priv

This saves 3248 bytes of .rodata strings.

v2: Add parantheses around dev_priv. (Ville Syrjala)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drivers/gpu/drm/i915/i915_drv.h

@@ -2811,7 +2811,7 @@ struct drm_i915_cmd_table {
 
 #define HAS_DP_MST(dev)	(INTEL_INFO(dev)->has_dp_mst)
 
-#define HAS_DDI(dev)		(INTEL_INFO(dev)->has_ddi)
+#define HAS_DDI(dev_priv)	((dev_priv)->info.has_ddi)
 #define HAS_FPGA_DBG_UNCLAIMED(dev)	(INTEL_INFO(dev)->has_fpga_dbg)
 #define HAS_PSR(dev)		(INTEL_INFO(dev)->has_psr)
 #define HAS_RUNTIME_PM(dev)	(INTEL_INFO(dev)->has_runtime_pm)
@@ -2850,8 +2850,10 @@ struct drm_i915_cmd_table {
 #define HAS_PCH_KBP(dev) (INTEL_PCH_TYPE(dev) == PCH_KBP)
 #define HAS_PCH_SPT(dev) (INTEL_PCH_TYPE(dev) == PCH_SPT)
 #define HAS_PCH_LPT(dev) (INTEL_PCH_TYPE(dev) == PCH_LPT)
-#define HAS_PCH_LPT_LP(dev) (__I915__(dev)->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE)
-#define HAS_PCH_LPT_H(dev) (__I915__(dev)->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE)
+#define HAS_PCH_LPT_LP(dev_priv) \
+	((dev_priv)->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE)
+#define HAS_PCH_LPT_H(dev_priv) \
+	((dev_priv)->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE)
 #define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
 #define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
 #define HAS_PCH_NOP(dev) (INTEL_PCH_TYPE(dev) == PCH_NOP)

drivers/gpu/drm/i915/intel_crt.c

@@ -280,13 +280,13 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,
 				     struct intel_crtc_state *pipe_config,
 				     struct drm_connector_state *conn_state)
 {
-	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 
-	if (HAS_PCH_SPLIT(dev))
+	if (HAS_PCH_SPLIT(dev_priv))
 		pipe_config->has_pch_encoder = true;
 
 	/* LPT FDI RX only supports 8bpc. */
-	if (HAS_PCH_LPT(dev)) {
+	if (HAS_PCH_LPT(dev_priv)) {
 		if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) {
 			DRM_DEBUG_KMS("LPT only supports 24bpp\n");
 			return false;
@@ -296,7 +296,7 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,
 	}
 
 	/* FDI must always be 2.7 GHz */
-	if (HAS_DDI(dev))
+	if (HAS_DDI(dev_priv))
 		pipe_config->port_clock = 135000 * 2;
 
 	return true;
@@ -917,7 +917,7 @@ void intel_crt_init(struct drm_device *dev)
 	if (I915_HAS_HOTPLUG(dev) &&
 	    !dmi_check_system(intel_spurious_crt_detect))
 		crt->base.hpd_pin = HPD_CRT;
-	if (HAS_DDI(dev)) {
+	if (HAS_DDI(dev_priv)) {
 		crt->base.port = PORT_E;
 		crt->base.get_config = hsw_crt_get_config;
 		crt->base.get_hw_state = intel_ddi_get_hw_state;

drivers/gpu/drm/i915/intel_display.c

@@ -1187,19 +1187,17 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
 			onoff(state), onoff(cur_state));
 }
 
-void assert_panel_unlocked(struct drm_i915_private *dev_priv,
-			   enum pipe pipe)
+void assert_panel_unlocked(struct drm_i915_private *dev_priv, enum pipe pipe)
 {
-	struct drm_device *dev = &dev_priv->drm;
 	i915_reg_t pp_reg;
 	u32 val;
 	enum pipe panel_pipe = PIPE_A;
 	bool locked = true;
 
-	if (WARN_ON(HAS_DDI(dev)))
+	if (WARN_ON(HAS_DDI(dev_priv)))
 		return;
 
-	if (HAS_PCH_SPLIT(dev)) {
+	if (HAS_PCH_SPLIT(dev_priv)) {
 		u32 port_sel;
 
 		pp_reg = PP_CONTROL(0);
@@ -1209,7 +1207,7 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
 		    I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
 			panel_pipe = PIPE_B;
 		/* XXX: else fix for eDP */
-	} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
+	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		/* presumably write lock depends on pipe, not port select */
 		pp_reg = PP_CONTROL(pipe);
 		panel_pipe = pipe;
@@ -5696,13 +5694,13 @@ static enum intel_display_power_domain port_to_aux_power_domain(enum port port)
 enum intel_display_power_domain
 intel_display_port_power_domain(struct intel_encoder *intel_encoder)
 {
-	struct drm_device *dev = intel_encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
 	struct intel_digital_port *intel_dig_port;
 
 	switch (intel_encoder->type) {
 	case INTEL_OUTPUT_UNKNOWN:
 		/* Only DDI platforms should ever use this output type */
-		WARN_ON_ONCE(!HAS_DDI(dev));
+		WARN_ON_ONCE(!HAS_DDI(dev_priv));
 	case INTEL_OUTPUT_DP:
 	case INTEL_OUTPUT_HDMI:
 	case INTEL_OUTPUT_EDP:
@@ -5723,7 +5721,7 @@ intel_display_port_power_domain(struct intel_encoder *intel_encoder)
 enum intel_display_power_domain
 intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
 {
-	struct drm_device *dev = intel_encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
 	struct intel_digital_port *intel_dig_port;
 
 	switch (intel_encoder->type) {
@@ -5736,7 +5734,7 @@ intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
 		 * what's the status of the given connectors, play safe and
 		 * run the DP detection too.
 		 */
-		WARN_ON_ONCE(!HAS_DDI(dev));
+		WARN_ON_ONCE(!HAS_DDI(dev_priv));
 	case INTEL_OUTPUT_DP:
 	case INTEL_OUTPUT_EDP:
 		intel_dig_port = enc_to_dig_port(&intel_encoder->base);
@@ -9196,7 +9194,8 @@ static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
 
 	if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
 		with_spread = true;
-	if (WARN(HAS_PCH_LPT_LP(dev) && with_fdi, "LP PCH doesn't have FDI\n"))
+	if (WARN(HAS_PCH_LPT_LP(dev_priv) &&
+	    with_fdi, "LP PCH doesn't have FDI\n"))
 		with_fdi = false;
 
 	mutex_lock(&dev_priv->sb_lock);
@@ -9219,7 +9218,7 @@ static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
 		}
 	}
 
-	reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
+	reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0;
 	tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
 	tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
 	intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
@@ -9235,7 +9234,7 @@ static void lpt_disable_clkout_dp(struct drm_device *dev)
 
 	mutex_lock(&dev_priv->sb_lock);
 
-	reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
+	reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0;
 	tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
 	tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
 	intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
@@ -10203,7 +10202,7 @@ void hsw_enable_pc8(struct drm_i915_private *dev_priv)
 
 	DRM_DEBUG_KMS("Enabling package C8+\n");
 
-	if (HAS_PCH_LPT_LP(dev)) {
+	if (HAS_PCH_LPT_LP(dev_priv)) {
 		val = I915_READ(SOUTH_DSPCLK_GATE_D);
 		val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
 		I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
@@ -10223,7 +10222,7 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv)
 	hsw_restore_lcpll(dev_priv);
 	lpt_init_pch_refclk(dev);
 
-	if (HAS_PCH_LPT_LP(dev)) {
+	if (HAS_PCH_LPT_LP(dev_priv)) {
 		val = I915_READ(SOUTH_DSPCLK_GATE_D);
 		val |= PCH_LP_PARTITION_LEVEL_DISABLE;
 		I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
@@ -10845,7 +10844,7 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base,
 		}
 		cntl |= pipe << 28; /* Connect to correct pipe */
 
-		if (HAS_DDI(dev))
+		if (HAS_DDI(dev_priv))
 			cntl |= CURSOR_PIPE_CSC_ENABLE;
 
 		if (plane_state->base.rotation == DRM_ROTATE_180)
@@ -12745,6 +12744,7 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 				   const char *context)
 {
 	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct drm_plane *plane;
 	struct intel_plane *intel_plane;
 	struct intel_plane_state *state;
@@ -12827,7 +12827,7 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 			      pipe_config->dpll_hw_state.ctrl1,
 			      pipe_config->dpll_hw_state.cfgcr1,
 			      pipe_config->dpll_hw_state.cfgcr2);
-	} else if (HAS_DDI(dev)) {
+	} else if (HAS_DDI(dev_priv)) {
 		DRM_DEBUG_KMS("dpll_hw_state: wrpll: 0x%x spll: 0x%x\n",
 			      pipe_config->dpll_hw_state.wrpll,
 			      pipe_config->dpll_hw_state.spll);
@@ -12905,7 +12905,7 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
 		switch (encoder->type) {
 			unsigned int port_mask;
 		case INTEL_OUTPUT_UNKNOWN:
-			if (WARN_ON(!HAS_DDI(dev)))
+			if (WARN_ON(!HAS_DDI(to_i915(dev))))
 				break;
 		case INTEL_OUTPUT_DP:
 		case INTEL_OUTPUT_HDMI:
@@ -13729,7 +13729,7 @@ intel_modeset_verify_disabled(struct drm_device *dev)
 
 static void update_scanline_offset(struct intel_crtc *crtc)
 {
-	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 
 	/*
 	 * The scanline counter increments at the leading edge of hsync.
@@ -13749,7 +13749,7 @@ static void update_scanline_offset(struct intel_crtc *crtc)
 	 * there's an extra 1 line difference. So we need to add two instead of
 	 * one to the value.
 	 */
-	if (IS_GEN2(dev)) {
+	if (IS_GEN2(dev_priv)) {
 		const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
 		int vtotal;
 
@@ -13758,7 +13758,7 @@ static void update_scanline_offset(struct intel_crtc *crtc)
 			vtotal /= 2;
 
 		crtc->scanline_offset = vtotal - 1;
-	} else if (HAS_DDI(dev) &&
+	} else if (HAS_DDI(dev_priv) &&
 		   intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI)) {
 		crtc->scanline_offset = 2;
 	} else
@@ -15327,11 +15327,12 @@ static bool intel_crt_present(struct drm_device *dev)
 	if (IS_CHERRYVIEW(dev))
 		return false;
 
-	if (HAS_PCH_LPT_H(dev) && I915_READ(SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
+	if (HAS_PCH_LPT_H(dev_priv) &&
+	    I915_READ(SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
 		return false;
 
 	/* DDI E can't be used if DDI A requires 4 lanes */
-	if (HAS_DDI(dev) && I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
+	if (HAS_DDI(dev_priv) && I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
 		return false;
 
 	if (!dev_priv->vbt.int_crt_support)
@@ -15405,7 +15406,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 		intel_ddi_init(dev, PORT_C);
 
 		intel_dsi_init(dev);
-	} else if (HAS_DDI(dev)) {
+	} else if (HAS_DDI(dev_priv)) {
 		int found;
 
 		/*

drivers/gpu/drm/i915/intel_dp.c

@@ -1565,7 +1565,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 
 	max_clock = common_len - 1;
 
-	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A)
+	if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
 		pipe_config->has_pch_encoder = true;
 
 	pipe_config->has_drrs = false;
@@ -1707,7 +1707,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 		to_intel_atomic_state(pipe_config->base.state)->cdclk_pll_vco = vco;
 	}
 
-	if (!HAS_DDI(dev))
+	if (!HAS_DDI(dev_priv))
 		intel_dp_set_clock(encoder, pipe_config);
 
 	return true;
@@ -2632,7 +2632,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp,
 		DRM_DEBUG_KMS("Using DP training pattern TPS%d\n",
 			      dp_train_pat & DP_TRAINING_PATTERN_MASK);
 
-	if (HAS_DDI(dev)) {
+	if (HAS_DDI(dev_priv)) {
 		uint32_t temp = I915_READ(DP_TP_CTL(port));
 
 		if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
@@ -3339,7 +3339,7 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp)
 	uint32_t signal_levels, mask = 0;
 	uint8_t train_set = intel_dp->train_set[0];
 
-	if (HAS_DDI(dev)) {
+	if (HAS_DDI(dev_priv)) {
 		signal_levels = ddi_signal_levels(intel_dp);
 
 		if (IS_BROXTON(dev))
@@ -3398,7 +3398,7 @@ void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
 	enum port port = intel_dig_port->port;
 	uint32_t val;
 
-	if (!HAS_DDI(dev))
+	if (!HAS_DDI(dev_priv))
 		return;
 
 	val = I915_READ(DP_TP_CTL(port));
@@ -3433,7 +3433,7 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	uint32_t DP = intel_dp->DP;
 
-	if (WARN_ON(HAS_DDI(dev)))
+	if (WARN_ON(HAS_DDI(dev_priv)))
 		return;
 
 	if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
@@ -5659,7 +5659,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	else
 		intel_dp->get_aux_send_ctl = g4x_get_aux_send_ctl;
 
-	if (HAS_DDI(dev))
+	if (HAS_DDI(dev_priv))
 		intel_dp->prepare_link_retrain = intel_ddi_prepare_link_retrain;
 
 	/* Preserve the current hw state. */
@@ -5701,7 +5701,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 
-	if (HAS_DDI(dev))
+	if (HAS_DDI(dev_priv))
 		intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
 	else
 		intel_connector->get_hw_state = intel_connector_get_hw_state;

drivers/gpu/drm/i915/intel_dpll_mgr.c

@@ -1855,7 +1855,7 @@ void intel_shared_dpll_init(struct drm_device *dev)
 		dpll_mgr = &skl_pll_mgr;
 	else if (IS_BROXTON(dev))
 		dpll_mgr = &bxt_pll_mgr;
-	else if (HAS_DDI(dev))
+	else if (HAS_DDI(dev_priv))
 		dpll_mgr = &hsw_pll_mgr;
 	else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
 		dpll_mgr = &pch_pll_mgr;
@@ -1883,7 +1883,7 @@ void intel_shared_dpll_init(struct drm_device *dev)
 	BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
 
 	/* FIXME: Move this to a more suitable place */
-	if (HAS_DDI(dev))
+	if (HAS_DDI(dev_priv))
 		intel_ddi_pll_init(dev);
 }
 

drivers/gpu/drm/i915/intel_hdmi.c

@@ -50,7 +50,7 @@ assert_hdmi_port_disabled(struct intel_hdmi *intel_hdmi)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	uint32_t enabled_bits;
 
-	enabled_bits = HAS_DDI(dev) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
+	enabled_bits = HAS_DDI(dev_priv) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
 
 	WARN(I915_READ(intel_hdmi->hdmi_reg) & enabled_bits,
 	     "HDMI port enabled, expecting disabled\n");
@@ -1312,7 +1312,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 			       struct drm_connector_state *conn_state)
 {
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
-	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
 	int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock;
 	int clock_12bpc = clock_8bpc * 3 / 2;
@@ -1339,7 +1339,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 		clock_12bpc *= 2;
 	}
 
-	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev))
+	if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
 		pipe_config->has_pch_encoder = true;
 
 	if (pipe_config->has_hdmi_sink && intel_hdmi->has_audio)
@@ -1892,7 +1892,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_hdmi->write_infoframe = g4x_write_infoframe;
 		intel_hdmi->set_infoframes = g4x_set_infoframes;
 		intel_hdmi->infoframe_enabled = g4x_infoframe_enabled;
-	} else if (HAS_DDI(dev)) {
+	} else if (HAS_DDI(dev_priv)) {
 		intel_hdmi->write_infoframe = hsw_write_infoframe;
 		intel_hdmi->set_infoframes = hsw_set_infoframes;
 		intel_hdmi->infoframe_enabled = hsw_infoframe_enabled;
@@ -1906,7 +1906,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_hdmi->infoframe_enabled = cpt_infoframe_enabled;
 	}
 
-	if (HAS_DDI(dev))
+	if (HAS_DDI(dev_priv))
 		intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
 	else
 		intel_connector->get_hw_state = intel_connector_get_hw_state;

drivers/gpu/drm/i915/intel_pm.c

@@ -7145,7 +7145,7 @@ static void lpt_init_clock_gating(struct drm_device *dev)
 	 * TODO: this bit should only be enabled when really needed, then
 	 * disabled when not needed anymore in order to save power.
 	 */
-	if (HAS_PCH_LPT_LP(dev))
+	if (HAS_PCH_LPT_LP(dev_priv))
 		I915_WRITE(SOUTH_DSPCLK_GATE_D,
 			   I915_READ(SOUTH_DSPCLK_GATE_D) |
 			   PCH_LP_PARTITION_LEVEL_DISABLE);
@@ -7160,7 +7160,7 @@ static void lpt_suspend_hw(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
 
-	if (HAS_PCH_LPT_LP(dev)) {
+	if (HAS_PCH_LPT_LP(dev_priv)) {
 		uint32_t val = I915_READ(SOUTH_DSPCLK_GATE_D);
 
 		val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;

drivers/gpu/drm/i915/intel_psr.c

@@ -344,7 +344,7 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
 	 * ones. Since by Display design transcoder EDP is tied to port A
 	 * we can safely escape based on the port A.
 	 */
-	if (HAS_DDI(dev) && dig_port->port != PORT_A) {
+	if (HAS_DDI(dev_priv) && dig_port->port != PORT_A) {
 		DRM_DEBUG_KMS("PSR condition failed: Port not supported\n");
 		return false;
 	}
@@ -402,7 +402,7 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
 	lockdep_assert_held(&dev_priv->psr.lock);
 
 	/* Enable/Re-enable PSR on the host */
-	if (HAS_DDI(dev))
+	if (HAS_DDI(dev_priv))
 		/* On HSW+ after we enable PSR on source it will activate it
 		 * as soon as it match configure idle_frame count. So
 		 * we just actually enable it here on activation time.
@@ -448,7 +448,7 @@ void intel_psr_enable(struct intel_dp *intel_dp)
 
 	dev_priv->psr.busy_frontbuffer_bits = 0;
 
-	if (HAS_DDI(dev)) {
+	if (HAS_DDI(dev_priv)) {
 		hsw_psr_setup_vsc(intel_dp);
 
 		if (dev_priv->psr.psr2_support) {
@@ -580,7 +580,7 @@ void intel_psr_disable(struct intel_dp *intel_dp)
 	}
 
 	/* Disable PSR on Source */
-	if (HAS_DDI(dev))
+	if (HAS_DDI(dev_priv))
 		hsw_psr_disable(intel_dp);
 	else
 		vlv_psr_disable(intel_dp);