Commit 4fee9473 authored by Marc Zyngier's avatar Marc Zyngier Committed by Christoffer Dall

arm64: KVM: Add invalidate_icache_range helper

We currently tightly couple dcache clean with icache invalidation,
but KVM could do without the initial flush to PoU, as we've
already flushed things to PoC.

Let's introduce invalidate_icache_range which is limited to
invalidating the icache from the linear mapping (and thus
has none of the userspace fault handling complexity), and
wire it in KVM instead of flush_icache_range.
Reviewed-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
parent a15f6939
......@@ -387,6 +387,27 @@ alternative_endif
dsb \domain
.endm
/*
* Macro to perform an instruction cache maintenance for the interval
* [start, end)
*
* start, end: virtual addresses describing the region
* label: A label to branch to on user fault.
* Corrupts: tmp1, tmp2
*/
.macro invalidate_icache_by_line start, end, tmp1, tmp2, label
icache_line_size \tmp1, \tmp2
sub \tmp2, \tmp1, #1
bic \tmp2, \start, \tmp2
9997:
USER(\label, ic ivau, \tmp2) // invalidate I line PoU
add \tmp2, \tmp2, \tmp1
cmp \tmp2, \end
b.lo 9997b
dsb ish
isb
.endm
/*
* reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
*/
......
......@@ -52,6 +52,12 @@
* - start - virtual start address
* - end - virtual end address
*
* invalidate_icache_range(start, end)
*
* Invalidate the I-cache in the region described by start, end.
* - start - virtual start address
* - end - virtual end address
*
* __flush_cache_user_range(start, end)
*
* Ensure coherency between the I-cache and the D-cache in the
......@@ -66,6 +72,7 @@
* - size - region size
*/
extern void flush_icache_range(unsigned long start, unsigned long end);
extern int invalidate_icache_range(unsigned long start, unsigned long end);
extern void __flush_dcache_area(void *addr, size_t len);
extern void __inval_dcache_area(void *addr, size_t len);
extern void __clean_dcache_area_poc(void *addr, size_t len);
......
......@@ -250,8 +250,8 @@ static inline void __invalidate_icache_guest_page(struct kvm_vcpu *vcpu,
/* PIPT or VPIPT at EL2 (see comment in __kvm_tlb_flush_vmid_ipa) */
void *va = page_address(pfn_to_page(pfn));
flush_icache_range((unsigned long)va,
(unsigned long)va + size);
invalidate_icache_range((unsigned long)va,
(unsigned long)va + size);
}
}
......
......@@ -60,16 +60,7 @@ user_alt 9f, "dc cvau, x4", "dc civac, x4", ARM64_WORKAROUND_CLEAN_CACHE
b.lo 1b
dsb ish
icache_line_size x2, x3
sub x3, x2, #1
bic x4, x0, x3
1:
USER(9f, ic ivau, x4 ) // invalidate I line PoU
add x4, x4, x2
cmp x4, x1
b.lo 1b
dsb ish
isb
invalidate_icache_by_line x0, x1, x2, x3, 9f
mov x0, #0
1:
uaccess_ttbr0_disable x1
......@@ -80,6 +71,27 @@ USER(9f, ic ivau, x4 ) // invalidate I line PoU
ENDPROC(flush_icache_range)
ENDPROC(__flush_cache_user_range)
/*
* invalidate_icache_range(start,end)
*
* Ensure that the I cache is invalid within specified region.
*
* - start - virtual start address of region
* - end - virtual end address of region
*/
ENTRY(invalidate_icache_range)
uaccess_ttbr0_enable x2, x3
invalidate_icache_by_line x0, x1, x2, x3, 2f
mov x0, xzr
1:
uaccess_ttbr0_disable x1
ret
2:
mov x0, #-EFAULT
b 1b
ENDPROC(invalidate_icache_range)
/*
* __flush_dcache_area(kaddr, size)
*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment