Commit 5050063c authored by Christian Krafft's avatar Christian Krafft Committed by Arnd Bergmann

[POWERPC] cell: use pmi in cpufreq driver

The new PMI driver was added in order to support
cpufreq on blades that require the frequency to
be controlled by the service processor, so use it
on those.
Signed-off-by: default avatarChristian Krafft <krafft@de.ibm.com>
Signed-off-by: default avatarArnd Bergmann <arnd.bergmann@de.ibm.com>
parent 5f7bdaee
...@@ -28,6 +28,8 @@ ...@@ -28,6 +28,8 @@
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/prom.h> #include <asm/prom.h>
#include <asm/time.h> #include <asm/time.h>
#include <asm/pmi.h>
#include <asm/of_platform.h>
#include "cbe_regs.h" #include "cbe_regs.h"
...@@ -68,6 +70,38 @@ static u64 MIC_Slow_Next_Timer_table[] = { ...@@ -68,6 +70,38 @@ static u64 MIC_Slow_Next_Timer_table[] = {
* hardware specific functions * hardware specific functions
*/ */
static struct of_device *pmi_dev;
static int set_pmode_pmi(int cpu, unsigned int pmode)
{
int ret;
pmi_message_t pmi_msg;
#ifdef DEBUG
u64 time;
#endif
pmi_msg.type = PMI_TYPE_FREQ_CHANGE;
pmi_msg.data1 = cbe_cpu_to_node(cpu);
pmi_msg.data2 = pmode;
#ifdef DEBUG
time = (u64) get_cycles();
#endif
pmi_send_message(pmi_dev, pmi_msg);
ret = pmi_msg.data2;
pr_debug("PMI returned slow mode %d\n", ret);
#ifdef DEBUG
time = (u64) get_cycles() - time; /* actual cycles (not cpu cycles!) */
time = 1000000000 * time / CLOCK_TICK_RATE; /* time in ns (10^-9) */
pr_debug("had to wait %lu ns for a transition\n", time);
#endif
return ret;
}
static int get_pmode(int cpu) static int get_pmode(int cpu)
{ {
int ret; int ret;
...@@ -79,7 +113,7 @@ static int get_pmode(int cpu) ...@@ -79,7 +113,7 @@ static int get_pmode(int cpu)
return ret; return ret;
} }
static int set_pmode(int cpu, unsigned int pmode) static int set_pmode_reg(int cpu, unsigned int pmode)
{ {
struct cbe_pmd_regs __iomem *pmd_regs; struct cbe_pmd_regs __iomem *pmd_regs;
struct cbe_mic_tm_regs __iomem *mic_tm_regs; struct cbe_mic_tm_regs __iomem *mic_tm_regs;
...@@ -120,6 +154,39 @@ static int set_pmode(int cpu, unsigned int pmode) ...@@ -120,6 +154,39 @@ static int set_pmode(int cpu, unsigned int pmode)
return 0; return 0;
} }
static int set_pmode(int cpu, unsigned int slow_mode) {
if(pmi_dev)
return set_pmode_pmi(cpu, slow_mode);
else
return set_pmode_reg(cpu, slow_mode);
}
static void cbe_cpufreq_handle_pmi(struct of_device *dev, pmi_message_t pmi_msg)
{
struct cpufreq_policy policy;
u8 cpu;
u8 cbe_pmode_new;
BUG_ON (pmi_msg.type != PMI_TYPE_FREQ_CHANGE);
cpu = cbe_node_to_cpu(pmi_msg.data1);
cbe_pmode_new = pmi_msg.data2;
cpufreq_get_policy(&policy, cpu);
policy.max = min(policy.max, cbe_freqs[cbe_pmode_new].frequency);
policy.min = min(policy.min, policy.max);
pr_debug("cbe_handle_pmi: new policy.min=%d policy.max=%d\n", policy.min, policy.max);
cpufreq_set_policy(&policy);
}
static struct pmi_handler cbe_pmi_handler = {
.type = PMI_TYPE_FREQ_CHANGE,
.handle_pmi_message = cbe_cpufreq_handle_pmi,
};
/* /*
* cpufreq functions * cpufreq functions
*/ */
...@@ -234,11 +301,23 @@ static struct cpufreq_driver cbe_cpufreq_driver = { ...@@ -234,11 +301,23 @@ static struct cpufreq_driver cbe_cpufreq_driver = {
static int __init cbe_cpufreq_init(void) static int __init cbe_cpufreq_init(void)
{ {
struct device_node *np;
np = of_find_node_by_type(NULL, "ibm,pmi");
pmi_dev = of_find_device_by_node(np);
if (pmi_dev)
pmi_register_handler(pmi_dev, &cbe_pmi_handler);
return cpufreq_register_driver(&cbe_cpufreq_driver); return cpufreq_register_driver(&cbe_cpufreq_driver);
} }
static void __exit cbe_cpufreq_exit(void) static void __exit cbe_cpufreq_exit(void)
{ {
if(pmi_dev)
pmi_unregister_handler(pmi_dev, &cbe_pmi_handler);
cpufreq_unregister_driver(&cbe_cpufreq_driver); cpufreq_unregister_driver(&cbe_cpufreq_driver);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment