ath10k: improve pci debug messages

To make it easier to debug pci problems improve the log messages in pci.c. Also
change some debug messages to warning messages to more easily catch problems.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/pci.c

@@ -454,8 +454,8 @@ static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data,
 				__le32_to_cpu(((__le32 *)data_buf)[i]);
 		}
 	} else
-		ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n",
-			   __func__, address);
+		ath10k_warn("failed to read diag value at 0x%x: %d\n",
+			    address, ret);
 
 	if (data_buf)
 		pci_free_consistent(ar_pci->pdev, orig_nbytes,
@@ -605,8 +605,8 @@ static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	}
 
 	if (ret != 0)
-		ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n", __func__,
-			   address);
+		ath10k_warn("failed to write diag value at 0x%x: %d\n",
+			    address, ret);
 
 	return ret;
 }
@@ -815,6 +815,9 @@ static int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
 static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif get free queue number\n");
+
 	return ath10k_ce_num_free_src_entries(ar_pci->pipe_info[pipe].ce_hdl);
 }
 
@@ -866,6 +869,8 @@ static void ath10k_pci_hif_dump_area(struct ath10k *ar)
 static void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
 					       int force)
 {
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif send complete check\n");
+
 	if (!force) {
 		int resources;
 		/*
@@ -892,7 +897,7 @@ static void ath10k_pci_hif_set_callbacks(struct ath10k *ar,
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif set callbacks\n");
 
 	memcpy(&ar_pci->msg_callbacks_current, callbacks,
 	       sizeof(ar_pci->msg_callbacks_current));
@@ -950,6 +955,8 @@ static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar,
 {
 	int ret = 0;
 
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif map service\n");
+
 	/* polling for received messages not supported */
 	*dl_is_polled = 0;
 
@@ -1009,6 +1016,8 @@ static void ath10k_pci_hif_get_default_pipe(struct ath10k *ar,
 {
 	int ul_is_polled, dl_is_polled;
 
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif get default pipe\n");
+
 	(void)ath10k_pci_hif_map_service_to_pipe(ar,
 						 ATH10K_HTC_SVC_ID_RSVD_CTRL,
 						 ul_pipe,
@@ -1110,6 +1119,8 @@ static int ath10k_pci_hif_start(struct ath10k *ar)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret, ret_early;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif start\n");
+
 	ath10k_pci_free_early_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
 
@@ -1264,7 +1275,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret;
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif stop\n");
 
 	ret = ath10k_ce_disable_interrupts(ar);
 	if (ret)
@@ -1783,7 +1794,7 @@ static int ath10k_pci_warm_reset(struct ath10k *ar)
 	int ret = 0;
 	u32 val;
 
-	ath10k_dbg(ATH10K_DBG_BOOT, "boot performing warm chip reset\n");
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot warm reset\n");
 
 	ret = ath10k_do_pci_wake(ar);
 	if (ret) {
@@ -1966,6 +1977,8 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
 {
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif power up\n");
+
 	/*
 	 * Hardware CUS232 version 2 has some issues with cold reset and the
 	 * preferred (and safer) way to perform a device reset is through a
@@ -1999,6 +2012,8 @@ static void ath10k_pci_hif_power_down(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif power down\n");
+
 	ath10k_pci_free_early_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
 	ath10k_pci_deinit_irq(ar);
@@ -2403,6 +2418,8 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 	int ret;
 	u32 val;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot waiting target to initialise\n");
+
 	ret = ath10k_pci_wake(ar);
 	if (ret) {
 		ath10k_err("failed to wake up target for init: %d\n", ret);
@@ -2414,6 +2431,8 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 	do {
 		val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
 
+		ath10k_dbg(ATH10K_DBG_BOOT, "boot target indicator %x\n", val);
+
 		/* target should never return this */
 		if (val == 0xffffffff)
 			continue;
@@ -2437,6 +2456,8 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 		goto out;
 	}
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot target initialised\n");
+
 out:
 	ath10k_pci_sleep(ar);
 	return ret;
@@ -2447,6 +2468,8 @@ static int ath10k_pci_cold_reset(struct ath10k *ar)
 	int i, ret;
 	u32 val;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot cold reset\n");
+
 	ret = ath10k_do_pci_wake(ar);
 	if (ret) {
 		ath10k_err("failed to wake up target: %d\n",
@@ -2478,6 +2501,9 @@ static int ath10k_pci_cold_reset(struct ath10k *ar)
 	}
 
 	ath10k_do_pci_sleep(ar);
+
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot cold reset complete\n");
+
 	return 0;
 }
 
@@ -2509,7 +2535,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	struct ath10k_pci *ar_pci;
 	u32 lcr_val, chip_id;
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_PCI, "pci probe\n");
 
 	ar_pci = kzalloc(sizeof(*ar_pci), GFP_KERNEL);
 	if (ar_pci == NULL)
@@ -2650,7 +2676,7 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
 	struct ath10k *ar = pci_get_drvdata(pdev);
 	struct ath10k_pci *ar_pci;
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_PCI, "pci remove\n");
 
 	if (!ar)
 		return;