usb: dwc3: meson-g12a: specify phy names in soc data

To handle the variable USB2 PHY counts on GXL and GXM SoCs, add the
possible PHY names for each SoC in the compatible match data.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

drivers/usb/dwc3/dwc3-meson-g12a.c

@@ -96,16 +96,8 @@
 	#define USB_R5_ID_DIG_TH_MASK				GENMASK(15, 8)
 	#define USB_R5_ID_DIG_CNT_MASK				GENMASK(23, 16)
 
-enum {
-	USB2_HOST_PHY = 0,
-	USB2_OTG_PHY,
-	USB3_HOST_PHY,
-	PHY_COUNT,
-};
-
-static const char *phy_names[PHY_COUNT] = {
-	"usb2-phy0", "usb2-phy1", "usb3-phy0",
-};
+#define PHY_COUNT						3
+#define USB2_OTG_PHY						1
 
 static struct clk_bulk_data meson_g12a_clocks[] = {
 	{ .id = NULL },
@@ -117,22 +109,44 @@ static struct clk_bulk_data meson_a1_clocks[] = {
 	{ .id = "xtal_usb_ctrl" },
 };
 
+static const char *meson_g12a_phy_names[] = {
+	"usb2-phy0", "usb2-phy1", "usb3-phy0",
+};
+
+/*
+ * Amlogic A1 has a single physical PHY, in slot 1, but still has the
+ * two U2 PHY controls register blocks like G12A.
+ * Handling the first PHY on slot 1 would need a large amount of code
+ * changes, and the current management is generic enough to handle it
+ * correctly when only the "usb2-phy1" phy is specified on-par with the
+ * DT bindings.
+ */
+static const char *meson_a1_phy_names[] = {
+	"usb2-phy0", "usb2-phy1"
+};
+
 struct dwc3_meson_g12a_drvdata {
 	bool otg_switch_supported;
 	struct clk_bulk_data *clks;
 	int num_clks;
+	const char **phy_names;
+	int num_phys;
 };
 
 static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
 	.otg_switch_supported = true,
 	.clks = meson_g12a_clocks,
 	.num_clks = ARRAY_SIZE(meson_g12a_clocks),
+	.phy_names = meson_g12a_phy_names,
+	.num_phys = ARRAY_SIZE(meson_g12a_phy_names),
 };
 
 static struct dwc3_meson_g12a_drvdata a1_drvdata = {
 	.otg_switch_supported = false,
 	.clks = meson_a1_clocks,
 	.num_clks = ARRAY_SIZE(meson_a1_clocks),
+	.phy_names = meson_a1_phy_names,
+	.num_phys = ARRAY_SIZE(meson_a1_phy_names),
 };
 
 struct dwc3_meson_g12a {
@@ -171,10 +185,13 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
 	else
 		priv->otg_phy_mode = PHY_MODE_USB_HOST;
 
-	for (i = 0 ; i < USB3_HOST_PHY ; ++i) {
+	for (i = 0; i < priv->drvdata->num_phys; ++i) {
 		if (!priv->phys[i])
 			continue;
 
+		if (!strstr(priv->drvdata->phy_names[i], "usb2"))
+			continue;
+
 		regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
 				   U2P_R0_POWER_ON_RESET,
 				   U2P_R0_POWER_ON_RESET);
@@ -284,17 +301,19 @@ static const struct regmap_config phy_meson_g12a_usb3_regmap_conf = {
 
 static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv)
 {
+	const char *phy_name;
 	int i;
 
-	for (i = 0 ; i < PHY_COUNT ; ++i) {
-		priv->phys[i] = devm_phy_optional_get(priv->dev, phy_names[i]);
+	for (i = 0 ; i < priv->drvdata->num_phys ; ++i) {
+		phy_name = priv->drvdata->phy_names[i];
+		priv->phys[i] = devm_phy_optional_get(priv->dev, phy_name);
 		if (!priv->phys[i])
 			continue;
 
 		if (IS_ERR(priv->phys[i]))
 			return PTR_ERR(priv->phys[i]);
 
-		if (i == USB3_HOST_PHY)
+		if (strstr(phy_name, "usb3"))
 			priv->usb3_ports++;
 		else
 			priv->usb2_ports++;