Commit 519b4dba authored by Jyri Sarha's avatar Jyri Sarha Committed by Bartlomiej Zolnierkiewicz

fbdev: ssd1307fb: Remove reset-active-low from the DT binding document

Remove reset-active-low from the devicetree binding document. The actual
implementation has never been there in the driver code and there is no
reason to add it because the gpiod API supports gpio flags, including
GPIO_ACTIVE_LOW, directly trough its own devicetree binding.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Signed-off-by: default avatarJyri Sarha <jsarha@ti.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
parent 72db3335
...@@ -8,14 +8,14 @@ Required properties: ...@@ -8,14 +8,14 @@ Required properties:
0x3c or 0x3d 0x3c or 0x3d
- pwm: Should contain the pwm to use according to the OF device tree PWM - pwm: Should contain the pwm to use according to the OF device tree PWM
specification [0]. Only required for the ssd1307. specification [0]. Only required for the ssd1307.
- reset-gpios: Should contain the GPIO used to reset the OLED display - reset-gpios: Should contain the GPIO used to reset the OLED display. See
Documentation/devicetree/bindings/gpio/gpio.txt for details.
- solomon,height: Height in pixel of the screen driven by the controller - solomon,height: Height in pixel of the screen driven by the controller
- solomon,width: Width in pixel of the screen driven by the controller - solomon,width: Width in pixel of the screen driven by the controller
- solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is
mapped to. mapped to.
Optional properties: Optional properties:
- reset-active-low: Is the reset gpio is active on physical low?
- solomon,segment-no-remap: Display needs normal (non-inverted) data column - solomon,segment-no-remap: Display needs normal (non-inverted) data column
to segment mapping to segment mapping
- solomon,com-seq: Display uses sequential COM pin configuration - solomon,com-seq: Display uses sequential COM pin configuration
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment