Commit 51c7b447 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Andrzej Hajda

dt-bindings: display: tfp410: Add bus-width parameter property

tfp410 can be connect to host processor in 24bit, single-edge (24 lines) or
12bit, dual-edge (12 lines).

Add bus-width to the documentation so it can be used to select between the
two connection scheme.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-2-peter.ujfalusi@ti.com
parent 3d31e215
...@@ -18,7 +18,14 @@ This device has two video ports. Their connections are modeled using the OF ...@@ -18,7 +18,14 @@ This device has two video ports. Their connections are modeled using the OF
graph bindings specified in [1]. Each port node shall have a single endpoint. graph bindings specified in [1]. Each port node shall have a single endpoint.
- Port 0 is the DPI input port. Its endpoint subnode shall contain a - Port 0 is the DPI input port. Its endpoint subnode shall contain a
pclk-sample property and a remote-endpoint property as specified in [1]. pclk-sample and bus-width property and a remote-endpoint property as specified
in [1].
- If pclk-sample is not defined, pclk-sample = 0 should be assumed for
backward compatibility.
- If bus-width is not defined then bus-width = 24 should be assumed for
backward compatibility.
bus-width = 24: 24 data lines are connected and single-edge mode
bus-width = 12: 12 data lines are connected and dual-edge mode
- Port 1 is the DVI output port. Its endpoint subnode shall contain a - Port 1 is the DVI output port. Its endpoint subnode shall contain a
remote-endpoint property is specified in [1]. remote-endpoint property is specified in [1].
...@@ -43,6 +50,7 @@ tfp410: encoder@0 { ...@@ -43,6 +50,7 @@ tfp410: encoder@0 {
tfp410_in: endpoint@0 { tfp410_in: endpoint@0 {
pclk-sample = <1>; pclk-sample = <1>;
bus-width = <24>;
remote-endpoint = <&dpi_out>; remote-endpoint = <&dpi_out>;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment