cnic: Fine-tune CID memory space calculation.

The current code makes assumptions about the CID (context ID) memory
space and starting CID that may not be always correct when firmware
changes.  In particular, BNX2_ISCSI_START_CID may not always be fixed.
We now calculate cp->max_cid_space and cp->iscsi_start_cid dynamically
instead of using fixed constants.  The unused cp->max_iscsi_conn is also
eliminated.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/cnic.c

@@ -257,7 +257,7 @@ static int cnic_get_l5_cid(struct cnic_local *cp, u32 cid, u32 *l5_cid)
 {
 	u32 i;
 
-	for (i = 0; i < MAX_ISCSI_TBL_SZ; i++) {
+	for (i = 0; i < cp->max_cid_space; i++) {
 		if (cp->ctx_tbl[i].cid == cid) {
 			*l5_cid = i;
 			return 0;
@@ -981,17 +981,10 @@ static int cnic_alloc_bnx2_resc(struct cnic_dev *dev)
 static int cnic_alloc_bnx2x_context(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
-	struct cnic_eth_dev *ethdev = cp->ethdev;
 	int ctx_blk_size = cp->ethdev->ctx_blk_size;
-	int total_mem, blks, i, cid_space;
-
-	if (BNX2X_ISCSI_START_CID < ethdev->starting_cid)
-		return -EINVAL;
-
-	cid_space = MAX_ISCSI_TBL_SZ +
-		    (BNX2X_ISCSI_START_CID - ethdev->starting_cid);
+	int total_mem, blks, i;
 
-	total_mem = BNX2X_CONTEXT_MEM_SIZE * cid_space;
+	total_mem = BNX2X_CONTEXT_MEM_SIZE * cp->max_cid_space;
 	blks = total_mem / ctx_blk_size;
 	if (total_mem % ctx_blk_size)
 		blks++;
@@ -1035,16 +1028,27 @@ static int cnic_alloc_bnx2x_context(struct cnic_dev *dev)
 static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	u32 start_cid = ethdev->starting_cid;
 	int i, j, n, ret, pages;
 	struct cnic_dma *kwq_16_dma = &cp->kwq_16_data_info;
 
+	cp->max_cid_space = MAX_ISCSI_TBL_SZ;
+	cp->iscsi_start_cid = start_cid;
+	if (start_cid < BNX2X_ISCSI_START_CID) {
+		u32 delta = BNX2X_ISCSI_START_CID - start_cid;
+
+		cp->iscsi_start_cid = BNX2X_ISCSI_START_CID;
+		cp->max_cid_space += delta;
+	}
+
 	cp->iscsi_tbl = kzalloc(sizeof(struct cnic_iscsi) * MAX_ISCSI_TBL_SZ,
 				GFP_KERNEL);
 	if (!cp->iscsi_tbl)
 		goto error;
 
 	cp->ctx_tbl = kzalloc(sizeof(struct cnic_context) *
-				  MAX_CNIC_L5_CONTEXT, GFP_KERNEL);
+				cp->max_cid_space, GFP_KERNEL);
 	if (!cp->ctx_tbl)
 		goto error;
 
@@ -1053,7 +1057,7 @@ static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
 		cp->ctx_tbl[i].ulp_proto_id = CNIC_ULP_ISCSI;
 	}
 
-	pages = PAGE_ALIGN(MAX_CNIC_L5_CONTEXT * CNIC_KWQ16_DATA_SIZE) /
+	pages = PAGE_ALIGN(cp->max_cid_space * CNIC_KWQ16_DATA_SIZE) /
 		PAGE_SIZE;
 
 	ret = cnic_alloc_dma(dev, kwq_16_dma, pages, 0);
@@ -1061,7 +1065,7 @@ static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
 		return -ENOMEM;
 
 	n = PAGE_SIZE / CNIC_KWQ16_DATA_SIZE;
-	for (i = 0, j = 0; i < MAX_ISCSI_TBL_SZ; i++) {
+	for (i = 0, j = 0; i < cp->max_cid_space; i++) {
 		long off = CNIC_KWQ16_DATA_SIZE * (i % n);
 
 		cp->ctx_tbl[i].kwqe_data = kwq_16_dma->pg_arr[j] + off;
@@ -4129,7 +4133,7 @@ static int cnic_start_bnx2x_hw(struct cnic_dev *dev)
 	u8 sb_id = cp->status_blk_num;
 
 	ret = cnic_init_id_tbl(&cp->cid_tbl, MAX_ISCSI_TBL_SZ,
-			       BNX2X_ISCSI_START_CID);
+			       cp->iscsi_start_cid);
 
 	if (ret)
 		return -ENOMEM;

drivers/net/cnic.h

@@ -248,8 +248,10 @@ struct cnic_local {
 	struct cnic_iscsi	*iscsi_tbl;
 	struct cnic_context	*ctx_tbl;
 	struct cnic_id_tbl	cid_tbl;
-	int			max_iscsi_conn;
 	atomic_t		iscsi_conn;
+	u32			iscsi_start_cid;
+
+	u32			max_cid_space;
 
 	/* per connection parameters */
 	int			num_iscsi_tasks;