Commit 53665a50 authored by Eric Miao's avatar Eric Miao Committed by Russell King

[ARM] 4436/1: PXA: move low IRQ initialization code to pxa_init_irq_low()

1. move low IRQ initialization code to pxa_init_irq_low()
Signed-off-by: default avatareric miao <eric.miao@marvell.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent c08b7b3e
...@@ -67,6 +67,26 @@ static struct irq_chip pxa_internal_chip_low = { ...@@ -67,6 +67,26 @@ static struct irq_chip pxa_internal_chip_low = {
.set_wake = pxa_set_wake, .set_wake = pxa_set_wake,
}; };
void __init pxa_init_irq_low(void)
{
int irq;
/* disable all IRQs */
ICMR = 0;
/* all IRQs are IRQ, not FIQ */
ICLR = 0;
/* only unmasked interrupts kick us out of idle */
ICCR = 1;
for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) {
set_irq_chip(irq, &pxa_internal_chip_low);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
}
#ifdef CONFIG_PXA27x #ifdef CONFIG_PXA27x
/* /*
...@@ -331,12 +351,6 @@ void __init pxa_init_irq(void) ...@@ -331,12 +351,6 @@ void __init pxa_init_irq(void)
{ {
int irq; int irq;
/* disable all IRQs */
ICMR = 0;
/* all IRQs are IRQ, not FIQ */
ICLR = 0;
/* clear all GPIO edge detects */ /* clear all GPIO edge detects */
GFER0 = 0; GFER0 = 0;
GFER1 = 0; GFER1 = 0;
...@@ -355,18 +369,10 @@ void __init pxa_init_irq(void) ...@@ -355,18 +369,10 @@ void __init pxa_init_irq(void)
GEDR3 = GEDR3; GEDR3 = GEDR3;
#endif #endif
/* only unmasked interrupts kick us out of idle */
ICCR = 1;
/* GPIO 0 and 1 must have their mask bit always set */ /* GPIO 0 and 1 must have their mask bit always set */
GPIO_IRQ_mask[0] = 3; GPIO_IRQ_mask[0] = 3;
for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) { pxa_init_irq_low();
set_irq_chip(irq, &pxa_internal_chip_low);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
#ifdef CONFIG_PXA27x #ifdef CONFIG_PXA27x
pxa_init_irq_high(); pxa_init_irq_high();
#endif #endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment