Commit 538e4563 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by David S. Miller

bgmac: support up to 3 cores (devices) on a bus

Broadcom buses may have more than 1 Ethernet device. This is used e.g.
to have few interfaces connected to different switch ports. So far we
saw chipsets with only 2 devices (e.g. BCM4706) but recent ones have
up to 3 (e.g. Netgear R8000 uses 3rd interface for most of switch
traffic, lower interfaces are for some kind of offloading).
Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 395250e4
...@@ -1549,11 +1549,20 @@ static int bgmac_probe(struct bcma_device *core) ...@@ -1549,11 +1549,20 @@ static int bgmac_probe(struct bcma_device *core)
struct net_device *net_dev; struct net_device *net_dev;
struct bgmac *bgmac; struct bgmac *bgmac;
struct ssb_sprom *sprom = &core->bus->sprom; struct ssb_sprom *sprom = &core->bus->sprom;
u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac; u8 *mac;
int err; int err;
/* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */ switch (core->core_unit) {
if (core->core_unit > 1) { case 0:
mac = sprom->et0mac;
break;
case 1:
mac = sprom->et1mac;
break;
case 2:
mac = sprom->et2mac;
break;
default:
pr_err("Unsupported core_unit %d\n", core->core_unit); pr_err("Unsupported core_unit %d\n", core->core_unit);
return -ENOTSUPP; return -ENOTSUPP;
} }
...@@ -1588,8 +1597,17 @@ static int bgmac_probe(struct bcma_device *core) ...@@ -1588,8 +1597,17 @@ static int bgmac_probe(struct bcma_device *core)
} }
bgmac->cmn = core->bus->drv_gmac_cmn.core; bgmac->cmn = core->bus->drv_gmac_cmn.core;
bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr : switch (core->core_unit) {
sprom->et0phyaddr; case 0:
bgmac->phyaddr = sprom->et0phyaddr;
break;
case 1:
bgmac->phyaddr = sprom->et1phyaddr;
break;
case 2:
bgmac->phyaddr = sprom->et2phyaddr;
break;
}
bgmac->phyaddr &= BGMAC_PHY_MASK; bgmac->phyaddr &= BGMAC_PHY_MASK;
if (bgmac->phyaddr == BGMAC_PHY_MASK) { if (bgmac->phyaddr == BGMAC_PHY_MASK) {
bgmac_err(bgmac, "No PHY found\n"); bgmac_err(bgmac, "No PHY found\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment