ARM: davinci: make irqs.h a local header

The existence of irqs.h in mach-davinci/include/mach only makes sense
without SPARSE_IRQ as it's then expected to define NR_IRQS and is
included from asm/irq.h. As we now support SPARSE_IRQ, this header can
be moved to mach-davinci and used as the source of HW interrupt numbers.

While updating the includes in various files - also rearrange the
headers by directory (linux/asm/mach).
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/mach-davinci/board-da830-evm.c

@@ -36,11 +36,12 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/irqs.h>
-#include "cp_intc.h"
 #include <mach/mux.h>
 #include <mach/da8xx.h>
 
+#include "cp_intc.h"
+#include "irqs.h"
+
 #define DA830_EVM_PHY_ID		""
 /*
  * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].

arch/arm/mach-davinci/board-da850-evm.c

@@ -43,10 +43,11 @@
 #include <linux/spi/flash.h>
 
 #include <mach/common.h>
-#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <mach/mux.h>
-#include <mach/irqs.h>
+
+#include "cp_intc.h"
+#include "irqs.h"
 #include "sram.h"
 
 #include <asm/mach-types.h>

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -36,10 +36,10 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/irqs.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <mach/serial.h>
 #include <mach/mux.h>
+#include <mach/serial.h>
+
+#include <linux/platform_data/i2c-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mmc-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
@@ -47,6 +47,7 @@
 #include <linux/platform_data/ti-aemif.h>
 
 #include "davinci.h"
+#include "irqs.h"
 
 #define DM644X_EVM_PHY_ID		"davinci_mdio-0:01"
 #define LXT971_PHY_ID	(0x001378e2)

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -44,10 +44,10 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/irqs.h>
 #include <mach/serial.h>
 
 #include "davinci.h"
+#include "irqs.h"
 
 #define NAND_BLOCK_SIZE		SZ_128K
 

arch/arm/mach-davinci/da830.c

@@ -19,9 +19,9 @@
 #include <mach/common.h>
 #include <mach/cputype.h>
 #include <mach/da8xx.h>
-#include <mach/irqs.h>
 #include <mach/time.h>
 
+#include "irqs.h"
 #include "mux.h"
 
 /* Offsets of the 8 compare registers on the da830 */

arch/arm/mach-davinci/da850.c

@@ -32,10 +32,10 @@
 #include <mach/cpufreq.h>
 #include <mach/cputype.h>
 #include <mach/da8xx.h>
-#include <mach/irqs.h>
 #include <mach/pm.h>
 #include <mach/time.h>
 
+#include "irqs.h"
 #include "mux.h"
 
 #define DA850_PLL1_BASE		0x01e1a000

arch/arm/mach-davinci/devices-da8xx.c

@@ -25,10 +25,10 @@
 #include <mach/cputype.h>
 #include <mach/da8xx.h>
 #include <mach/time.h>
-#include <mach/irqs.h>
 
 #include "asp.h"
 #include "cpuidle.h"
+#include "irqs.h"
 #include "sram.h"
 
 #define DA8XX_TPCC_BASE			0x01c00000

arch/arm/mach-davinci/devices.c

@@ -11,21 +11,20 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/edma.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/reboot.h>
 
 #include <mach/hardware.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mmc-davinci.h>
 #include <mach/time.h>
-#include <linux/platform_data/edma.h>
-
 
 #include "davinci.h"
+#include "irqs.h"
 
 #define DAVINCI_I2C_BASE	     0x01C21000
 #define DAVINCI_ATA_BASE	     0x01C66000

arch/arm/mach-davinci/dm355.c

@@ -26,13 +26,13 @@
 
 #include <mach/common.h>
 #include <mach/cputype.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/serial.h>
 #include <mach/time.h>
 
 #include "asp.h"
 #include "davinci.h"
+#include "irqs.h"
 #include "mux.h"
 
 #define DM355_UART2_BASE	(IO_PHYS + 0x206000)

arch/arm/mach-davinci/dm365.c

@@ -31,13 +31,13 @@
 
 #include <mach/common.h>
 #include <mach/cputype.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/serial.h>
 #include <mach/time.h>
 
 #include "asp.h"
 #include "davinci.h"
+#include "irqs.h"
 #include "mux.h"
 
 #define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */

arch/arm/mach-davinci/dm644x.c

@@ -23,13 +23,13 @@
 
 #include <mach/common.h>
 #include <mach/cputype.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/serial.h>
 #include <mach/time.h>
 
 #include "asp.h"
 #include "davinci.h"
+#include "irqs.h"
 #include "mux.h"
 
 /*

arch/arm/mach-davinci/dm646x.c

@@ -24,13 +24,13 @@
 
 #include <mach/common.h>
 #include <mach/cputype.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/serial.h>
 #include <mach/time.h>
 
 #include "asp.h"
 #include "davinci.h"
+#include "irqs.h"
 #include "mux.h"
 
 #define DAVINCI_VPIF_BASE       (0x01C12000)

arch/arm/mach-davinci/irq.c

@@ -28,10 +28,11 @@
 #include <mach/hardware.h>
 #include <mach/cputype.h>
 #include <mach/common.h>
-#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/exception.h>
 
+#include "irqs.h"
+
 #define FIQ_REG0_OFFSET		0x0000
 #define FIQ_REG1_OFFSET		0x0004
 #define IRQ_REG0_OFFSET		0x0008

arch/arm/mach-davinci/usb-da8xx.c

@@ -18,7 +18,8 @@
 #include <mach/common.h>
 #include <mach/cputype.h>
 #include <mach/da8xx.h>
-#include <mach/irqs.h>
+
+#include "irqs.h"
 
 #define DA8XX_USB0_BASE		0x01e00000
 #define DA8XX_USB1_BASE		0x01e25000

arch/arm/mach-davinci/usb.c

@@ -2,16 +2,16 @@
 /*
  * USB
  */
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
+#include <linux/platform_data/usb-davinci.h>
 #include <linux/usb/musb.h>
 
 #include <mach/common.h>
-#include <mach/irqs.h>
 #include <mach/cputype.h>
-#include <linux/platform_data/usb-davinci.h>
+
+#include "irqs.h"
 
 #define DAVINCI_USB_OTG_BASE	0x01c64000