[libata] bump versions, add MODULE_VERSION() tags

Also remove dep on CONFIG_EXPERIMENTAL for libata itself,
and several libata drivers.

drivers/scsi/Kconfig

@@ -399,7 +399,7 @@ source "drivers/scsi/megaraid/Kconfig.megaraid"
 
 config SCSI_SATA
 	bool "Serial ATA (SATA) support"
-	depends on SCSI && EXPERIMENTAL
+	depends on SCSI
 	help
 	  This driver family supports Serial ATA host controllers
 	  and devices.
@@ -408,15 +408,15 @@ config SCSI_SATA
 
 config SCSI_SATA_AHCI
 	tristate "AHCI SATA support"
-	depends on SCSI_SATA && PCI && EXPERIMENTAL
+	depends on SCSI_SATA && PCI
 	help
 	  This option enables support for AHCI Serial ATA.
 
 	  If unsure, say N.
 
 config SCSI_SATA_SVW
-	tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
-	depends on SCSI_SATA && PCI && EXPERIMENTAL
+	tristate "ServerWorks Frodo / Apple K2 SATA support"
+	depends on SCSI_SATA && PCI
 	help
 	  This option enables support for Broadcom/Serverworks/Apple K2
 	  SATA support.
@@ -467,7 +467,7 @@ config SCSI_SATA_SIL
 
 config SCSI_SATA_SIS
 	tristate "SiS 964/180 SATA support"
-	depends on SCSI_SATA && PCI
+	depends on SCSI_SATA && PCI && EXPERIMENTAL
 	help
 	  This option enables support for SiS Serial ATA 964/180.
 
@@ -483,7 +483,7 @@ config SCSI_SATA_ULI
 
 config SCSI_SATA_VIA
 	tristate "VIA SATA support"
-	depends on SCSI_SATA && PCI && EXPERIMENTAL
+	depends on SCSI_SATA && PCI
 	help
 	  This option enables support for VIA Serial ATA.
 
@@ -491,7 +491,7 @@ config SCSI_SATA_VIA
 
 config SCSI_SATA_VITESSE
 	tristate "VITESSE VSC-7174 SATA support"
-	depends on SCSI_SATA && PCI && EXPERIMENTAL
+	depends on SCSI_SATA && PCI
 	help
 	  This option enables support for Vitesse VSC7174 Serial ATA.
 

drivers/scsi/ata_piix.c

@@ -32,7 +32,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"1.02"
+#define DRV_VERSION	"1.03"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
@@ -247,6 +247,7 @@ MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik");
 MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 /**
  *	piix_pata_cbl_detect - Probe host controller cable detect info

drivers/scsi/libata-core.c

@@ -67,6 +67,7 @@ static struct workqueue_struct *ata_wq;
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Library module for ATA devices");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
 
 /**
  *	ata_tf_load - send taskfile registers to host controller

drivers/scsi/libata.h

@@ -26,7 +26,7 @@
 #define __LIBATA_H__
 
 #define DRV_NAME	"libata"
-#define DRV_VERSION	"1.02"	/* must be exactly four chars */
+#define DRV_VERSION	"1.10"	/* must be exactly four chars */
 
 struct ata_scsi_args {
 	u16			*id;

drivers/scsi/sata_nv.c

@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME			"sata_nv"
-#define DRV_VERSION			"0.03"
+#define DRV_VERSION			"0.5"
 
 #define NV_PORTS			2
 #define NV_PIO_MASK			0x1f
@@ -234,6 +234,7 @@ MODULE_AUTHOR("NVIDIA");
 MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 irqreturn_t nv_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
 {

drivers/scsi/sata_promise.c

@@ -40,7 +40,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"1.00"
+#define DRV_VERSION	"1.01"
 
 
 enum {
@@ -661,6 +661,7 @@ MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Promise SATA TX2/TX4 low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 module_init(pdc_ata_init);
 module_exit(pdc_ata_exit);

drivers/scsi/sata_sil.c

@@ -38,7 +38,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil"
-#define DRV_VERSION	"0.54"
+#define DRV_VERSION	"0.8"
 
 enum {
 	sil_3112		= 0,
@@ -190,6 +190,7 @@ MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 static void sil_post_set_mode (struct ata_port *ap)
 {

drivers/scsi/sata_sis.c

@@ -38,7 +38,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sis"
-#define DRV_VERSION	"0.10"
+#define DRV_VERSION	"0.5"
 
 enum {
 	sis_180			= 0,
@@ -128,6 +128,7 @@ MODULE_AUTHOR("Uwe Koziolek");
 MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg)
 {

drivers/scsi/sata_svw.c

@@ -49,7 +49,7 @@
 #endif /* CONFIG_PPC_OF */
 
 #define DRV_NAME	"sata_svw"
-#define DRV_VERSION	"1.04"
+#define DRV_VERSION	"1.05"
 
 /* Taskfile registers offsets */
 #define K2_SATA_TF_CMD_OFFSET		0x00
@@ -470,6 +470,7 @@ MODULE_AUTHOR("Benjamin Herrenschmidt");
 MODULE_DESCRIPTION("low-level driver for K2 SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 module_init(k2_sata_init);
 module_exit(k2_sata_exit);

drivers/scsi/sata_sx4.c

@@ -40,7 +40,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_sx4"
-#define DRV_VERSION	"0.50"
+#define DRV_VERSION	"0.7"
 
 
 enum {
@@ -1492,6 +1492,7 @@ MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Promise SATA low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, pdc_sata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 module_init(pdc_sata_init);
 module_exit(pdc_sata_exit);

drivers/scsi/sata_uli.c

@@ -32,7 +32,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_uli"
-#define DRV_VERSION	"0.11"
+#define DRV_VERSION	"0.2"
 
 enum {
 	uli_5289		= 0,
@@ -123,6 +123,7 @@ MODULE_AUTHOR("Peer Chen");
 MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, uli_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg)
 {

drivers/scsi/sata_via.c

@@ -38,7 +38,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_via"
-#define DRV_VERSION	"0.20"
+#define DRV_VERSION	"1.0"
 
 enum {
 	via_sata		= 0,
@@ -138,6 +138,7 @@ MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, svia_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {

drivers/scsi/sata_vsc.c

@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_vsc"
-#define DRV_VERSION	"0.01"
+#define DRV_VERSION	"1.0"
 
 /* Interrupt register offsets (from chip base address) */
 #define VSC_SATA_INT_STAT_OFFSET	0x00
@@ -393,6 +393,7 @@ MODULE_AUTHOR("Jeremy Higdon");
 MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 module_init(vsc_sata_init);
 module_exit(vsc_sata_exit);