Commit 548f07d2 authored by Jaehoon Chung's avatar Jaehoon Chung Committed by Chris Ball

mmc: sdhci-s3c: add platform_8bit_width() hook

We have 8-bit width support but is not a v3 controller.
So we need platform_8bit_width() to support 8-bit buswidth.
Also we need MMC_CAP_8_BIT_DATA, so we add it in platdata.

This gets 8-bit support working again on s3c, after we previously
disabled 8-bit by default on non-v3 controllers.
Signed-off-by: default avatarJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent 3119cbda
......@@ -277,10 +277,43 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
host->clock = clock;
}
/**
* sdhci_s3c_platform_8bit_width - support 8bit buswidth
* @host: The SDHCI host being queried
* @width: MMC_BUS_WIDTH_ macro for the bus width being requested
*
* We have 8-bit width support but is not a v3 controller.
* So we add platform_8bit_width() and support 8bit width.
*/
static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
{
u8 ctrl;
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
switch (width) {
case MMC_BUS_WIDTH_8:
ctrl |= SDHCI_CTRL_8BITBUS;
ctrl &= ~SDHCI_CTRL_4BITBUS;
break;
case MMC_BUS_WIDTH_4:
ctrl |= SDHCI_CTRL_4BITBUS;
ctrl &= ~SDHCI_CTRL_8BITBUS;
break;
default:
break;
}
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
return 0;
}
static struct sdhci_ops sdhci_s3c_ops = {
.get_max_clock = sdhci_s3c_get_max_clk,
.set_clock = sdhci_s3c_set_clock,
.get_min_clock = sdhci_s3c_get_min_clock,
.platform_8bit_width = sdhci_s3c_platform_8bit_width,
};
static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
......@@ -473,6 +506,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
host->mmc->caps = MMC_CAP_NONREMOVABLE;
if (pdata->host_caps)
host->mmc->caps |= pdata->host_caps;
host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
SDHCI_QUIRK_32BIT_DMA_SIZE);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment