Commit 54a0ed0d authored by Russell King's avatar Russell King Committed by David S. Miller

net: dsa: provide an option for drivers to always receive bridge VLANs

DSA assumes that a bridge which has vlan filtering disabled is not
vlan aware, and ignores all vlan configuration. However, the kernel
software bridge code allows configuration in this state.

This causes the kernel's idea of the bridge vlan state and the
hardware state to disagree, so "bridge vlan show" indicates a correct
configuration but the hardware lacks all configuration. Even worse,
enabling vlan filtering on a DSA bridge immediately blocks all traffic
which, given the output of "bridge vlan show", is very confusing.

Provide an option that drivers can set to indicate they want to receive
vlan configuration even when vlan filtering is disabled. At the very
least, this is safe for Marvell DSA bridges, which do not look up
ingress traffic in the VTU if the port is in 8021Q disabled state. It is
also safe for the Ocelot switch family. Whether this change is suitable
for all DSA bridges is not known.
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 26831d78
...@@ -282,6 +282,13 @@ struct dsa_switch { ...@@ -282,6 +282,13 @@ struct dsa_switch {
*/ */
bool vlan_filtering_is_global; bool vlan_filtering_is_global;
/* Pass .port_vlan_add and .port_vlan_del to drivers even for bridges
* that have vlan_filtering=0. All drivers should ideally set this (and
* then the option would get removed), but it is unknown whether this
* would break things or not.
*/
bool configure_vlan_while_not_filtering;
/* In case vlan_filtering_is_global is set, the VLAN awareness state /* In case vlan_filtering_is_global is set, the VLAN awareness state
* should be retrieved from here and not from the per-port settings. * should be retrieved from here and not from the per-port settings.
*/ */
......
...@@ -138,6 +138,7 @@ int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br); ...@@ -138,6 +138,7 @@ int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br);
void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br); void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br);
int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering, int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering,
struct switchdev_trans *trans); struct switchdev_trans *trans);
bool dsa_port_skip_vlan_configuration(struct dsa_port *dp);
int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock, int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock,
struct switchdev_trans *trans); struct switchdev_trans *trans);
int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu, int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
......
...@@ -257,6 +257,20 @@ int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering, ...@@ -257,6 +257,20 @@ int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering,
return 0; return 0;
} }
/* This enforces legacy behavior for switch drivers which assume they can't
* receive VLAN configuration when enslaved to a bridge with vlan_filtering=0
*/
bool dsa_port_skip_vlan_configuration(struct dsa_port *dp)
{
struct dsa_switch *ds = dp->ds;
if (!dp->bridge_dev)
return false;
return (!ds->configure_vlan_while_not_filtering &&
!br_vlan_enabled(dp->bridge_dev));
}
int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock, int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock,
struct switchdev_trans *trans) struct switchdev_trans *trans)
{ {
......
...@@ -314,7 +314,7 @@ static int dsa_slave_vlan_add(struct net_device *dev, ...@@ -314,7 +314,7 @@ static int dsa_slave_vlan_add(struct net_device *dev,
if (obj->orig_dev != dev) if (obj->orig_dev != dev)
return -EOPNOTSUPP; return -EOPNOTSUPP;
if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev)) if (dsa_port_skip_vlan_configuration(dp))
return 0; return 0;
vlan = *SWITCHDEV_OBJ_PORT_VLAN(obj); vlan = *SWITCHDEV_OBJ_PORT_VLAN(obj);
...@@ -381,7 +381,7 @@ static int dsa_slave_vlan_del(struct net_device *dev, ...@@ -381,7 +381,7 @@ static int dsa_slave_vlan_del(struct net_device *dev,
if (obj->orig_dev != dev) if (obj->orig_dev != dev)
return -EOPNOTSUPP; return -EOPNOTSUPP;
if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev)) if (dsa_port_skip_vlan_configuration(dp))
return 0; return 0;
/* Do not deprogram the CPU port as it may be shared with other user /* Do not deprogram the CPU port as it may be shared with other user
...@@ -1240,7 +1240,7 @@ static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto, ...@@ -1240,7 +1240,7 @@ static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
* need to emulate the switchdev prepare + commit phase. * need to emulate the switchdev prepare + commit phase.
*/ */
if (dp->bridge_dev) { if (dp->bridge_dev) {
if (!br_vlan_enabled(dp->bridge_dev)) if (dsa_port_skip_vlan_configuration(dp))
return 0; return 0;
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the /* br_vlan_get_info() returns -EINVAL or -ENOENT if the
...@@ -1274,7 +1274,7 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, ...@@ -1274,7 +1274,7 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
* need to emulate the switchdev prepare + commit phase. * need to emulate the switchdev prepare + commit phase.
*/ */
if (dp->bridge_dev) { if (dp->bridge_dev) {
if (!br_vlan_enabled(dp->bridge_dev)) if (dsa_port_skip_vlan_configuration(dp))
return 0; return 0;
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the /* br_vlan_get_info() returns -EINVAL or -ENOENT if the
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment