Commit 54aed4dd authored by Christoph Hellwig's avatar Christoph Hellwig Committed by Paul Burton

MIPS: IP27: use dma_direct_ops

IP27 is coherent and has a reasonably direct mapping, just with a little
per-bus offset added into the dma address.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19542/Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org
parent dffbfde7
......@@ -683,11 +683,11 @@ config SGI_IP22
config SGI_IP27
bool "SGI IP27 (Origin200/2000)"
select ARCH_HAS_PHYS_TO_DMA
select FW_ARC
select FW_ARC64
select BOOT_ELF64
select DEFAULT_SGI_PARTITION
select MIPS_DMA_DEFAULT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
select NR_CPUS_DEFAULT_64
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
*
*/
#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H
#define __ASM_MACH_IP27_DMA_COHERENCE_H
#include <asm/pci/bridge.h>
#define pdev_to_baddr(pdev, addr) \
(BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr))
#define dev_to_baddr(dev, addr) \
pdev_to_baddr(to_pci_dev(dev), (addr))
struct device;
static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
size_t size)
{
dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr));
return pa;
}
static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
struct page *page)
{
dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page));
return pa;
}
static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
dma_addr_t dma_addr)
{
return dma_addr & ~(0xffUL << 56);
}
static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
size_t size, enum dma_data_direction direction)
{
}
static inline int plat_dma_supported(struct device *dev, u64 mask)
{
/*
* we fall back to GFP_DMA when the mask isn't all 1s,
* so we can't guarantee allocations that must be
* within a tighter range than GFP_DMA..
*/
if (mask < DMA_BIT_MASK(24))
return 0;
return 1;
}
static inline void plat_post_dma_flush(struct device *dev)
{
}
static inline int plat_device_is_coherent(struct device *dev)
{
return 1; /* IP27 non-coherent mode is unsupported */
}
#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */
......@@ -11,6 +11,7 @@
#include <linux/export.h>
#include <linux/pci.h>
#include <linux/smp.h>
#include <linux/dma-direct.h>
#include <asm/sn/arch.h>
#include <asm/pci/bridge.h>
#include <asm/paccess.h>
......@@ -182,6 +183,19 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
return 0;
}
dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus);
return bc->baddr + paddr;
}
phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
{
return dma_addr & ~(0xffUL << 56);
}
/*
* Device might live on a subordinate PCI bus. XXX Walk up the chain of buses
* to find the slot number in sense of the bridge device register.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment