Merge tag 'pci-v4.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

 - Add Tyrel Datwyler as maintainer for PPC64 RPA hotplug (Tyrel
   Datwyler)

 - Add Gustavo Pimentel as DesignWare PCI maintainer (Joao Pinto)

 - Fix a Switchtec Spectre v1 vulnerability (Gustavo A. R. Silva)

 - Revert an unnecessary Intel 300 ACS quirk (Mika Westerberg)

 - Fix pciehp hot-add/powerfault detection that left indicators in wrong
   state (Keith Busch)

 - Fix pci_reset_bus() logic error (Dennis Dalessandro)

 - Revert IB/hfi1 PCI reset change that caused a deadlock (Dennis
   Dalessandro)

 - Allow enabling PASID on Root Complex Integrated Endpoints (Felix
   Kuehling)

* tag 'pci-v4.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Fix enabling of PASID on RC integrated endpoints
  IB/hfi1,PCI: Allow bus reset while probing
  PCI: Fix faulty logic in pci_reset_bus()
  PCI: pciehp: Fix hot-add vs powerfault detection order
  switchtec: Fix Spectre v1 vulnerability
  Revert "PCI: Add ACS quirk for Intel 300 series"
  MAINTAINERS: Add Gustavo Pimentel as DesignWare PCI maintainer
  MAINTAINERS: Add entries for PPC64 RPA PCI hotplug drivers

MAINTAINERS

@@ -7016,6 +7016,20 @@ F:	drivers/crypto/vmx/aes*
 F:	drivers/crypto/vmx/ghash*
 F:	drivers/crypto/vmx/ppc-xlate.pl
 
+IBM Power PCI Hotplug Driver for RPA-compliant PPC64 platform
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
+L:	linux-pci@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Supported
+F:	drivers/pci/hotplug/rpaphp*
+
+IBM Power IO DLPAR Driver for RPA-compliant PPC64 platform
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
+L:	linux-pci@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Supported
+F:	drivers/pci/hotplug/rpadlpar*
+
 IBM ServeRAID RAID DRIVER
 S:	Orphan
 F:	drivers/scsi/ips.*
@@ -11154,7 +11168,7 @@ F:	drivers/pci/controller/dwc/pci-exynos.c
 
 PCI DRIVER FOR SYNOPSYS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
-M:	Joao Pinto <Joao.Pinto@synopsys.com>
+M:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt

drivers/infiniband/hw/hfi1/pcie.c

@@ -893,14 +893,11 @@ static int trigger_sbr(struct hfi1_devdata *dd)
 		}
 
 	/*
-	 * A secondary bus reset (SBR) issues a hot reset to our device.
-	 * The following routine does a 1s wait after the reset is dropped
-	 * per PCI Trhfa (recovery time).  PCIe 3.0 section 6.6.1 -
-	 * Conventional Reset, paragraph 3, line 35 also says that a 1s
-	 * delay after a reset is required.  Per spec requirements,
-	 * the link is either working or not after that point.
+	 * This is an end around to do an SBR during probe time. A new API needs
+	 * to be implemented to have cleaner interface but this fixes the
+	 * current brokenness
 	 */
-	return pci_reset_bus(dev);
+	return pci_bridge_secondary_bus_reset(dev->bus->self);
 }
 
 /*

drivers/pci/hotplug/pciehp_hpc.c

@@ -496,7 +496,7 @@ int pciehp_power_on_slot(struct slot *slot)
 	u16 slot_status;
 	int retval;
 
-	/* Clear sticky power-fault bit from previous power failures */
+	/* Clear power-fault bit from previous power failures */
 	pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
 	if (slot_status & PCI_EXP_SLTSTA_PFD)
 		pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
@@ -646,6 +646,14 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
 		pciehp_handle_button_press(slot);
 	}
 
+	/* Check Power Fault Detected */
+	if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
+		ctrl->power_fault_detected = 1;
+		ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(slot));
+		pciehp_set_attention_status(slot, 1);
+		pciehp_green_led_off(slot);
+	}
+
 	/*
 	 * Disable requests have higher priority than Presence Detect Changed
 	 * or Data Link Layer State Changed events.
@@ -657,14 +665,6 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
 		pciehp_handle_presence_or_link_change(slot, events);
 	up_read(&ctrl->reset_lock);
 
-	/* Check Power Fault Detected */
-	if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
-		ctrl->power_fault_detected = 1;
-		ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(slot));
-		pciehp_set_attention_status(slot, 1);
-		pciehp_green_led_off(slot);
-	}
-
 	pci_config_pm_runtime_put(pdev);
 	wake_up(&ctrl->requester);
 	return IRQ_HANDLED;

drivers/pci/pci.c

@@ -4547,6 +4547,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev)
 
 	return pci_dev_wait(dev, "bus reset", PCIE_RESET_READY_POLL_MS);
 }
+EXPORT_SYMBOL_GPL(pci_bridge_secondary_bus_reset);
 
 static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
 {
@@ -5200,7 +5201,7 @@ static int __pci_reset_bus(struct pci_bus *bus)
  */
 int pci_reset_bus(struct pci_dev *pdev)
 {
-	return pci_probe_reset_slot(pdev->slot) ?
+	return (!pci_probe_reset_slot(pdev->slot)) ?
 	    __pci_reset_slot(pdev->slot) : __pci_reset_bus(pdev->bus);
 }
 EXPORT_SYMBOL_GPL(pci_reset_bus);

drivers/pci/probe.c

@@ -2074,6 +2074,7 @@ static void pci_configure_eetlp_prefix(struct pci_dev *dev)
 {
 #ifdef CONFIG_PCI_PASID
 	struct pci_dev *bridge;
+	int pcie_type;
 	u32 cap;
 
 	if (!pci_is_pcie(dev))
@@ -2083,7 +2084,9 @@ static void pci_configure_eetlp_prefix(struct pci_dev *dev)
 	if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX))
 		return;
 
-	if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
+	pcie_type = pci_pcie_type(dev);
+	if (pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
+	    pcie_type == PCI_EXP_TYPE_RC_END)
 		dev->eetlp_prefix_path = 1;
 	else {
 		bridge = pci_upstream_bridge(dev);

drivers/pci/quirks.c

@@ -4355,11 +4355,6 @@ static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags)
  *
  * 0x9d10-0x9d1b PCI Express Root port #{1-12}
  *
- * The 300 series chipset suffers from the same bug so include those root
- * ports here as well.
- *
- * 0xa32c-0xa343 PCI Express Root port #{0-24}
- *
  * [1] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html
  * [2] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html
  * [3] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-spec-update.html
@@ -4377,7 +4372,6 @@ static bool pci_quirk_intel_spt_pch_acs_match(struct pci_dev *dev)
 	case 0xa110 ... 0xa11f: case 0xa167 ... 0xa16a: /* Sunrise Point */
 	case 0xa290 ... 0xa29f: case 0xa2e7 ... 0xa2ee: /* Union Point */
 	case 0x9d10 ... 0x9d1b: /* 7th & 8th Gen Mobile */
-	case 0xa32c ... 0xa343:				/* 300 series */
 		return true;
 	}
 

drivers/pci/switch/switchtec.c

@@ -14,6 +14,8 @@
 #include <linux/poll.h>
 #include <linux/wait.h>
 
+#include <linux/nospec.h>
+
 MODULE_DESCRIPTION("Microsemi Switchtec(tm) PCIe Management Driver");
 MODULE_VERSION("0.1");
 MODULE_LICENSE("GPL");
@@ -909,6 +911,8 @@ static int ioctl_port_to_pff(struct switchtec_dev *stdev,
 	default:
 		if (p.port > ARRAY_SIZE(pcfg->dsp_pff_inst_id))
 			return -EINVAL;
+		p.port = array_index_nospec(p.port,
+					ARRAY_SIZE(pcfg->dsp_pff_inst_id) + 1);
 		p.pff = ioread32(&pcfg->dsp_pff_inst_id[p.port - 1]);
 		break;
 	}

include/linux/pci.h

@@ -1235,6 +1235,9 @@ void pci_bus_remove_resources(struct pci_bus *bus);
 int devm_request_pci_bus_resources(struct device *dev,
 				   struct list_head *resources);
 
+/* Temporary until new and working PCI SBR API in place */
+int pci_bridge_secondary_bus_reset(struct pci_dev *dev);
+
 #define pci_bus_for_each_resource(bus, res, i)				\
 	for (i = 0;							\
 	    (res = pci_bus_resource_n(bus, i)) || i < PCI_BRIDGE_RESOURCE_NUM; \