Commit 559c2009 authored by Hans de Goede's avatar Hans de Goede Committed by Mauro Carvalho Chehab

[media] radio-shark: Add support for suspend & resume

Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent d1f280d6
......@@ -59,7 +59,8 @@ MODULE_LICENSE("GPL");
#define v4l2_dev_to_shark(d) container_of(d, struct shark_device, v4l2_dev)
enum { BLUE_LED, BLUE_PULSE_LED, RED_LED, NO_LEDS };
/* Note BLUE_IS_PULSE comes after NO_LEDS as it is a status bit, not a LED */
enum { BLUE_LED, BLUE_PULSE_LED, RED_LED, NO_LEDS, BLUE_IS_PULSE };
struct shark_device {
struct usb_device *usbdev;
......@@ -190,6 +191,7 @@ static void shark_led_set_blue(struct led_classdev *led_cdev,
atomic_set(&shark->brightness[BLUE_LED], value);
set_bit(BLUE_LED, &shark->brightness_new);
clear_bit(BLUE_IS_PULSE, &shark->brightness_new);
schedule_work(&shark->led_work);
}
......@@ -201,6 +203,7 @@ static void shark_led_set_blue_pulse(struct led_classdev *led_cdev,
atomic_set(&shark->brightness[BLUE_PULSE_LED], 256 - value);
set_bit(BLUE_PULSE_LED, &shark->brightness_new);
set_bit(BLUE_IS_PULSE, &shark->brightness_new);
schedule_work(&shark->led_work);
}
......@@ -240,6 +243,7 @@ static int shark_register_leds(struct shark_device *shark, struct device *dev)
{
int i, retval;
atomic_set(&shark->brightness[BLUE_LED], 127);
INIT_WORK(&shark->led_work, shark_led_work);
for (i = 0; i < NO_LEDS; i++) {
shark->leds[i] = shark_led_templates[i];
......@@ -266,6 +270,16 @@ static void shark_unregister_leds(struct shark_device *shark)
cancel_work_sync(&shark->led_work);
}
static void shark_resume_leds(struct shark_device *shark)
{
if (test_bit(BLUE_IS_PULSE, &shark->brightness_new))
set_bit(BLUE_PULSE_LED, &shark->brightness_new);
else
set_bit(BLUE_LED, &shark->brightness_new);
set_bit(RED_LED, &shark->brightness_new);
schedule_work(&shark->led_work);
}
#else
static int shark_register_leds(struct shark_device *shark, struct device *dev)
{
......@@ -274,6 +288,7 @@ static int shark_register_leds(struct shark_device *shark, struct device *dev)
return 0;
}
static inline void shark_unregister_leds(struct shark_device *shark) { }
static inline void shark_resume_leds(struct shark_device *shark) { }
#endif
static void usb_shark_disconnect(struct usb_interface *intf)
......@@ -359,6 +374,27 @@ static int usb_shark_probe(struct usb_interface *intf,
return retval;
}
#ifdef CONFIG_PM
int usb_shark_suspend(struct usb_interface *intf, pm_message_t message)
{
return 0;
}
int usb_shark_resume(struct usb_interface *intf)
{
struct v4l2_device *v4l2_dev = usb_get_intfdata(intf);
struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev);
mutex_lock(&shark->tea.mutex);
snd_tea575x_set_freq(&shark->tea);
mutex_unlock(&shark->tea.mutex);
shark_resume_leds(shark);
return 0;
}
#endif
/* Specify the bcdDevice value, as the radioSHARK and radioSHARK2 share ids */
static struct usb_device_id usb_shark_device_table[] = {
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION |
......@@ -378,5 +414,10 @@ static struct usb_driver usb_shark_driver = {
.probe = usb_shark_probe,
.disconnect = usb_shark_disconnect,
.id_table = usb_shark_device_table,
#ifdef CONFIG_PM
.suspend = usb_shark_suspend,
.resume = usb_shark_resume,
.reset_resume = usb_shark_resume,
#endif
};
module_usb_driver(usb_shark_driver);
......@@ -73,5 +73,6 @@ struct snd_tea575x {
int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner);
void snd_tea575x_exit(struct snd_tea575x *tea);
void snd_tea575x_set_freq(struct snd_tea575x *tea);
#endif /* __SOUND_TEA575X_TUNER_H */
......@@ -191,7 +191,7 @@ static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
return snd_tea575x_val_to_freq(tea, snd_tea575x_read(tea));
}
static void snd_tea575x_set_freq(struct snd_tea575x *tea)
void snd_tea575x_set_freq(struct snd_tea575x *tea)
{
u32 freq = tea->freq / 16; /* to kHz */
u32 band = 0;
......@@ -571,3 +571,4 @@ module_exit(alsa_tea575x_module_exit)
EXPORT_SYMBOL(snd_tea575x_init);
EXPORT_SYMBOL(snd_tea575x_exit);
EXPORT_SYMBOL(snd_tea575x_set_freq);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment