Skip to content

L
linux
Commit 55a020e2 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'imx-fixes-4.19' of... 

Merge tag 'imx-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

i.MX fixes for 4.19:
 - i.MX display folks decided to switch MXS display driver from legacy
   FB to DRM during 4.19 merge window.  It leads to a fallout on some
   Freescale/NXP development boards with Seiko 43WVF1G panel, because
   this DRM panel driver is not enabled in i.MX defconfig.  Here is
   a series from Fabio to convert i.MX23/28 EVK DT to Seiko 43WVF1G
   panel bindings and enable the panel driver in i.MX defconfig, so that
   users can still get functional LCD on these boards by default.
 - A fix from Leonard to revert incorrect legacy PCI irq mapping in
   i.MX7 device tree, that was caused by document errors.

* tag 'imx-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G
  ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G
  ARM: dts: imx23-evk: Convert to the new display bindings
  ARM: dts: imx23-evk: Move regulators outside simple-bus
  ARM: dts: imx28-evk: Convert to the new display bindings
  ARM: dts: imx28-evk: Move regulators outside simple-bus
  Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping"
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 5b394b2d b9543a2e
Hide whitespace changes
Inline Side-by-side
Showing with 136 additions and 151 deletions
arch/arm/boot/dts/imx23-evk.dts
View file @ 55a020e2
......@@ -13,6 +13,43 @@ memory@40000000 {
reg = <0x40000000 0x08000000>;
};
reg_vddio_sd0: regulator-vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
reg_lcd_3v3: regulator-lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 18 0>;
enable-active-high;
};
reg_lcd_5v: regulator-lcd-5v {
compatible = "regulator-fixed";
regulator-name = "lcd-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
panel {
compatible = "sii,43wvf1g";
backlight = <&backlight_display>;
dvdd-supply = <&reg_lcd_3v3>;
avdd-supply = <&reg_lcd_5v>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
......@@ -52,31 +89,11 @@ MX23_PAD_SSP1_DETECT__SSP1_DETECT
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>;
lcd-supply = <&reg_lcd_3v3>;
display = <&display0>;
status = "okay";
display0: display0 {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <9200000>;
hactive = <480>;
vactive = <272>;
hback-porch = <15>;
hfront-porch = <8>;
vback-porch = <12>;
vfront-porch = <4>;
hsync-len = <1>;
vsync-len = <1>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
port {
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
......@@ -118,32 +135,7 @@ usb0: usb@80080000 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_vddio_sd0: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
reg_lcd_3v3: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 18 0>;
enable-active-high;
};
};
backlight {
backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
......
arch/arm/boot/dts/imx28-evk.dts
View file @ 55a020e2
......@@ -13,6 +13,87 @@ memory@40000000 {
reg = <0x40000000 0x08000000>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vddio_sd0: regulator-vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
reg_fec_3v3: regulator-fec-3v3 {
compatible = "regulator-fixed";
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
reg_usb0_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 9 0>;
enable-active-high;
};
reg_usb1_vbus: regulator-usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 8 0>;
enable-active-high;
};
reg_lcd_3v3: regulator-lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 0>;
enable-active-high;
};
reg_can_3v3: regulator-can-3v3 {
compatible = "regulator-fixed";
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 13 0>;
enable-active-high;
};
reg_lcd_5v: regulator-lcd-5v {
compatible = "regulator-fixed";
regulator-name = "lcd-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
panel {
compatible = "sii,43wvf1g";
backlight = <&backlight_display>;
dvdd-supply = <&reg_lcd_3v3>;
avdd-supply = <&reg_lcd_5v>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
......@@ -116,31 +197,11 @@ lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_evk>;
lcd-supply = <&reg_lcd_3v3>;
display = <&display0>;
status = "okay";
display0: display0 {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <33500000>;
hactive = <800>;
vactive = <480>;
hback-porch = <89>;
hfront-porch = <164>;
vback-porch = <23>;
vfront-porch = <10>;
hsync-len = <10>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
port {
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
......@@ -269,80 +330,6 @@ mac1: ethernet@800f4000 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
reg_fec_3v3: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
reg_usb0_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 9 0>;
enable-active-high;
};
reg_usb1_vbus: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 8 0>;
enable-active-high;
};
reg_lcd_3v3: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 0>;
enable-active-high;
};
reg_can_3v3: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 13 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx28-evk-sgtl5000",
"fsl,mxs-audio-sgtl5000";
......@@ -363,7 +350,7 @@ user {
};
};
backlight {
backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
......
arch/arm/boot/dts/imx7d.dtsi
View file @ 55a020e2
......@@ -126,10 +126,14 @@ pcie: pcie@33800000 {
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
/*
* Reference manual lists pci irqs incorrectly
* Real hardware ordering is same as imx6: D+MSI, C, B, A
*/
interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
<&clks IMX7D_PCIE_PHY_ROOT_CLK>;
......
arch/arm/configs/imx_v6_v7_defconfig
View file @ 55a020e2
......@@ -257,6 +257,7 @@ CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_IMX=y
......
arch/arm/configs/mxs_defconfig
View file @ 55a020e2
......@@ -95,6 +95,7 @@ CONFIG_MFD_MXS_LRADC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_MXSFB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7