Commit 55d9fcf5 authored by Matthew Wilcox's avatar Matthew Wilcox Committed by James Bottomley

[SCSI] dpt_i2o: convert to SCSI hotplug model

 - Delete refereces to HOSTS_C
 - Switch to module_init/module_exit instead of detect/release
 - Don't pass around the host template and rename it to adpt_template
 - Switch from scsi_register/scsi_unregister to scsi_host_alloc,
   scsi_add_host, scsi_scan_host and scsi_host_put.
Signed-off-by: default avatarMatthew Wilcox <matthew@wil.cx>
Acked-by: default avatar"Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 53772a2c
......@@ -173,20 +173,20 @@ static struct pci_device_id dptids[] = {
};
MODULE_DEVICE_TABLE(pci,dptids);
static int adpt_detect(struct scsi_host_template* sht)
static void adpt_exit(void);
static int adpt_detect(void)
{
struct pci_dev *pDev = NULL;
adpt_hba* pHba;
adpt_init();
PINFO("Detecting Adaptec I2O RAID controllers...\n");
/* search for all Adatpec I2O RAID cards */
while ((pDev = pci_get_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) {
if(pDev->device == PCI_DPT_DEVICE_ID ||
pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){
if(adpt_install_hba(sht, pDev) ){
if(adpt_install_hba(pDev) ){
PERROR("Could not Init an I2O RAID device\n");
PERROR("Will not try to detect others.\n");
return hba_count-1;
......@@ -248,34 +248,33 @@ static int adpt_detect(struct scsi_host_template* sht)
}
for (pHba = hba_chain; pHba; pHba = pHba->next) {
if( adpt_scsi_register(pHba,sht) < 0){
if (adpt_scsi_register(pHba) < 0) {
adpt_i2o_delete_hba(pHba);
continue;
}
pHba->initialized = TRUE;
pHba->state &= ~DPTI_STATE_RESET;
scsi_scan_host(pHba->host);
}
// Register our control device node
// nodes will need to be created in /dev to access this
// the nodes can not be created from within the driver
if (hba_count && register_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER, &adpt_fops)) {
adpt_i2o_sys_shutdown();
adpt_exit();
return 0;
}
return hba_count;
}
/*
* scsi_unregister will be called AFTER we return.
*/
static int adpt_release(struct Scsi_Host *host)
static int adpt_release(adpt_hba *pHba)
{
adpt_hba* pHba = (adpt_hba*) host->hostdata[0];
struct Scsi_Host *shost = pHba->host;
scsi_remove_host(shost);
// adpt_i2o_quiesce_hba(pHba);
adpt_i2o_delete_hba(pHba);
scsi_unregister(host);
scsi_host_put(shost);
return 0;
}
......@@ -882,7 +881,7 @@ static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p)
#endif
static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev)
static int adpt_install_hba(struct pci_dev* pDev)
{
adpt_hba* pHba = NULL;
......@@ -1031,8 +1030,6 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba)
mutex_lock(&adpt_configuration_lock);
// scsi_unregister calls our adpt_release which
// does a quiese
if(pHba->host){
free_irq(pHba->host->irq, pHba);
}
......@@ -1084,17 +1081,6 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba)
}
static int adpt_init(void)
{
printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
#ifdef REBOOT_NOTIFIER
register_reboot_notifier(&adpt_reboot_notifier);
#endif
return 0;
}
static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun)
{
struct adpt_device* d;
......@@ -2180,37 +2166,6 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d
}
static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht)
{
struct Scsi_Host *host = NULL;
host = scsi_register(sht, sizeof(adpt_hba*));
if (host == NULL) {
printk ("%s: scsi_register returned NULL\n",pHba->name);
return -1;
}
host->hostdata[0] = (unsigned long)pHba;
pHba->host = host;
host->irq = pHba->pDev->irq;
/* no IO ports, so don't have to set host->io_port and
* host->n_io_port
*/
host->io_port = 0;
host->n_io_port = 0;
/* see comments in scsi_host.h */
host->max_id = 16;
host->max_lun = 256;
host->max_channel = pHba->top_scsi_channel + 1;
host->cmd_per_lun = 1;
host->unique_id = (uint) pHba;
host->sg_tablesize = pHba->sg_tablesize;
host->can_queue = pHba->post_fifo_size;
return 0;
}
static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd)
{
adpt_hba* pHba;
......@@ -3329,12 +3284,10 @@ static static void adpt_delay(int millisec)
#endif
static struct scsi_host_template driver_template = {
static struct scsi_host_template adpt_template = {
.name = "dpt_i2o",
.proc_name = "dpt_i2o",
.proc_info = adpt_proc_info,
.detect = adpt_detect,
.release = adpt_release,
.info = adpt_info,
.queuecommand = adpt_queue,
.eh_abort_handler = adpt_abort,
......@@ -3348,5 +3301,62 @@ static struct scsi_host_template driver_template = {
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
};
#include "scsi_module.c"
static s32 adpt_scsi_register(adpt_hba* pHba)
{
struct Scsi_Host *host;
host = scsi_host_alloc(&adpt_template, sizeof(adpt_hba*));
if (host == NULL) {
printk ("%s: scsi_host_alloc returned NULL\n",pHba->name);
return -1;
}
host->hostdata[0] = (unsigned long)pHba;
pHba->host = host;
host->irq = pHba->pDev->irq;
/* no IO ports, so don't have to set host->io_port and
* host->n_io_port
*/
host->io_port = 0;
host->n_io_port = 0;
/* see comments in scsi_host.h */
host->max_id = 16;
host->max_lun = 256;
host->max_channel = pHba->top_scsi_channel + 1;
host->cmd_per_lun = 1;
host->unique_id = (uint) pHba;
host->sg_tablesize = pHba->sg_tablesize;
host->can_queue = pHba->post_fifo_size;
if (scsi_add_host(host, &pHba->pDev->dev)) {
scsi_host_put(host);
return -1;
}
return 0;
}
static int __init adpt_init(void)
{
int count;
printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
#ifdef REBOOT_NOTIFIER
register_reboot_notifier(&adpt_reboot_notifier);
#endif
count = adpt_detect();
return count > 0 ? 0 : -ENODEV;
}
static void __exit adpt_exit(void)
{
while (hba_chain)
adpt_release(hba_chain);
}
module_init(adpt_init);
module_exit(adpt_exit);
MODULE_LICENSE("GPL");
......@@ -28,11 +28,9 @@
* SCSI interface function Prototypes
*/
static int adpt_detect(struct scsi_host_template * sht);
static int adpt_queue(struct scsi_cmnd * cmd, void (*cmdcomplete) (struct scsi_cmnd *));
static int adpt_abort(struct scsi_cmnd * cmd);
static int adpt_reset(struct scsi_cmnd* cmd);
static int adpt_release(struct Scsi_Host *host);
static int adpt_slave_configure(struct scsi_device *);
static const char *adpt_info(struct Scsi_Host *pSHost);
......@@ -49,8 +47,6 @@ static int adpt_device_reset(struct scsi_cmnd* cmd);
#define DPT_DRIVER_NAME "Adaptec I2O RAID"
#ifndef HOSTS_C
#include "dpt/sys_info.h"
#include <linux/wait.h>
#include "dpt/dpti_i2o.h"
......@@ -289,7 +285,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba);
static s32 adpt_i2o_hrt_get(adpt_hba* pHba);
static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice);
static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd);
static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht);
static s32 adpt_scsi_register(adpt_hba* pHba);
static s32 adpt_hba_reset(adpt_hba* pHba);
static s32 adpt_i2o_reset_hba(adpt_hba* pHba);
static s32 adpt_rescan(adpt_hba* pHba);
......@@ -299,7 +295,7 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba);
static void adpt_inquiry(adpt_hba* pHba);
static void adpt_fail_posted_scbs(adpt_hba* pHba);
static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun);
static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) ;
static int adpt_install_hba(struct pci_dev* pDev) ;
static int adpt_i2o_online_hba(adpt_hba* pHba);
static void adpt_i2o_post_wait_complete(u32, int);
static int adpt_i2o_systab_send(adpt_hba* pHba);
......@@ -343,5 +339,4 @@ static void adpt_i386_info(sysInfo_S* si);
#define FW_DEBUG_BLED_OFFSET 8
#define FW_DEBUG_FLAGS_NO_HEADERS_B 0x01
#endif /* !HOSTS_C */
#endif /* _DPT_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment