OMAPDSS: panel-dpi: use gpiod for enable gpio

The new gpiod API supports automatic handling of active-high/active-low
with DT. To make it possible to use that when booting with DT, change
the panel-dpi's handling of the enable GPIO to use gpiod.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drivers/video/fbdev/omap2/displays-new/panel-dpi.c

@@ -25,8 +25,10 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
+	/* used for non-DT boot, to be removed */
 	int backlight_gpio;
-	int enable_gpio;
+
+	struct gpio_desc *enable_gpio;
 };
 
 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -77,8 +79,8 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 1);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
@@ -96,8 +98,8 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 0);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
@@ -156,6 +158,7 @@ static int panel_dpi_probe_pdata(struct platform_device *pdev)
 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
 	struct omap_dss_device *dssdev, *in;
 	struct videomode vm;
+	int r;
 
 	pdata = dev_get_platdata(&pdev->dev);
 
@@ -176,10 +179,20 @@ static int panel_dpi_probe_pdata(struct platform_device *pdev)
 	dssdev = &ddata->dssdev;
 	dssdev->name = pdata->name;
 
-	ddata->enable_gpio = pdata->enable_gpio;
+	r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
+					GPIOF_OUT_INIT_LOW, "panel enable");
+	if (r)
+		goto err_gpio;
+
+	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
 	ddata->backlight_gpio = pdata->backlight_gpio;
 
 	return 0;
+
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
 }
 
 static int panel_dpi_probe(struct platform_device *pdev)
@@ -202,13 +215,6 @@ static int panel_dpi_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (gpio_is_valid(ddata->enable_gpio)) {
-		r = devm_gpio_request_one(&pdev->dev, ddata->enable_gpio,
-				GPIOF_OUT_INIT_LOW, "panel enable");
-		if (r)
-			goto err_gpio;
-	}
-
 	if (gpio_is_valid(ddata->backlight_gpio)) {
 		r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
 				GPIOF_OUT_INIT_LOW, "panel backlight");