liquidio: Add support for liquidio 10GBase-T NIC

Added ethtool changes to show port type as TP (Twisted Pair) for
10GBASE-T ports. Same driver and firmware works for liquidio NIC with
SFP+ ports or TP ports.
Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/cavium/liquidio/lio_ethtool.c

@@ -232,10 +232,16 @@ static int lio_get_link_ksettings(struct net_device *netdev,
 
 	linfo = &lio->linfo;
 
-	if (linfo->link.s.if_mode == INTERFACE_MODE_XAUI ||
-	    linfo->link.s.if_mode == INTERFACE_MODE_RXAUI ||
-	    linfo->link.s.if_mode == INTERFACE_MODE_XLAUI ||
-	    linfo->link.s.if_mode == INTERFACE_MODE_XFI) {
+	switch (linfo->link.s.phy_type) {
+	case LIO_PHY_PORT_TP:
+		ecmd->base.port = PORT_TP;
+		supported = (SUPPORTED_10000baseT_Full |
+			     SUPPORTED_TP | SUPPORTED_Pause);
+		advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_Pause);
+		ecmd->base.autoneg = AUTONEG_DISABLE;
+		break;
+
+	case LIO_PHY_PORT_FIBRE:
 		ecmd->base.port = PORT_FIBRE;
 
 		if (linfo->link.s.speed == SPEED_10000) {
@@ -245,12 +251,18 @@ static int lio_get_link_ksettings(struct net_device *netdev,
 
 		supported |= SUPPORTED_FIBRE | SUPPORTED_Pause;
 		advertising |= ADVERTISED_Pause;
+		ecmd->base.autoneg = AUTONEG_DISABLE;
+		break;
+	}
+
+	if (linfo->link.s.if_mode == INTERFACE_MODE_XAUI ||
+	    linfo->link.s.if_mode == INTERFACE_MODE_RXAUI ||
+	    linfo->link.s.if_mode == INTERFACE_MODE_XLAUI ||
+	    linfo->link.s.if_mode == INTERFACE_MODE_XFI) {
 		ethtool_convert_legacy_u32_to_link_mode(
 			ecmd->link_modes.supported, supported);
 		ethtool_convert_legacy_u32_to_link_mode(
 			ecmd->link_modes.advertising, advertising);
-		ecmd->base.autoneg = AUTONEG_DISABLE;
-
 	} else {
 		dev_err(&oct->pci_dev->dev, "Unknown link interface reported %d\n",
 			linfo->link.s.if_mode);

drivers/net/ethernet/cavium/liquidio/liquidio_common.h

@@ -676,9 +676,11 @@ union oct_link_status {
 		u64 if_mode:5;
 		u64 pause:1;
 		u64 flashing:1;
-		u64 reserved:15;
+		u64 phy_type:5;
+		u64 reserved:10;
 #else
-		u64 reserved:15;
+		u64 reserved:10;
+		u64 phy_type:5;
 		u64 flashing:1;
 		u64 pause:1;
 		u64 if_mode:5;
@@ -691,6 +693,12 @@ union oct_link_status {
 	} s;
 };
 
+enum lio_phy_type {
+	LIO_PHY_PORT_TP = 0x0,
+	LIO_PHY_PORT_FIBRE = 0x1,
+	LIO_PHY_PORT_UNKNOWN,
+};
+
 /** The txpciq info passed to host from the firmware */
 
 union oct_txpciq {