Commit 56acb3ef authored by Olof Johansson's avatar Olof Johansson

Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 5.0

They are all device tree fixes which also worth being in stable:

 - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
   this area and crashing while doing it.

 - Use correct PCIe reset signal on MACCHIATOBin  (Armada 8040 based)

 - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)

* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 2ec472ed b5f03484
...@@ -36,8 +36,8 @@ gpio_fan { ...@@ -36,8 +36,8 @@ gpio_fan {
compatible = "gpio-fan"; compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
pinctrl-names = "default"; pinctrl-names = "default";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
&gpio1 13 GPIO_ACTIVE_LOW>; &gpio1 13 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0 gpio-fan,speed-map = <0 0
3000 1 3000 1
6000 2>; 6000 2>;
......
...@@ -183,7 +183,7 @@ &cp0_pcie0 { ...@@ -183,7 +183,7 @@ &cp0_pcie0 {
pinctrl-0 = <&cp0_pcie_pins>; pinctrl-0 = <&cp0_pcie_pins>;
num-lanes = <4>; num-lanes = <4>;
num-viewport = <8>; num-viewport = <8>;
reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
status = "okay"; status = "okay";
}; };
......
...@@ -28,6 +28,23 @@ psci { ...@@ -28,6 +28,23 @@ psci {
method = "smc"; method = "smc";
}; };
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/*
* This area matches the mapping done with a
* mainline U-Boot, and should be updated by the
* bootloader.
*/
psci-area@4000000 {
reg = <0x0 0x4000000 0x0 0x200000>;
no-map;
};
};
ap806 { ap806 {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <2>; #size-cells = <2>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment