Pull test into release branch

Documentation/feature-removal-schedule.txt

@@ -274,6 +274,7 @@ Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
 
 ---------------------------
 
+<<<<<<< test:Documentation/feature-removal-schedule.txt
 What:	ACPI hotkey driver (CONFIG_ACPI_HOTKEY)
 When:	2.6.21
 Why:	hotkey.c was an attempt to consolidate multiple drivers that use
@@ -306,11 +307,18 @@ Why:	The ACPI namespace is effectively the symbol list for
 	the BIOS can be extracted and disassembled with acpidump
 	and iasl as documented in the pmtools package here:
 	http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
-
 Who:	Len Brown <len.brown@intel.com>
 
 ---------------------------
 
+What:	ACPI procfs interface
+When:	July 2007
+Why:	After ACPI sysfs conversion, ACPI attributes will be duplicated
+	in sysfs and the ACPI procfs interface should be removed.
+Who:	Zhang Rui <rui.zhang@intel.com>
+
+---------------------------
+
 What:	/proc/acpi/button
 When:	August 2007
 Why:	/proc/acpi/button has been replaced by events to the input layer

Documentation/video-output.txt

+
+		Video Output Switcher Control
+		~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		2006 luming.yu@intel.com
+
+The output sysfs class driver provides an abstract video output layer that
+can be used to hook platform specific methods to enable/disable video output
+device through common sysfs interface. For example, on my IBM ThinkPad T42
+laptop, The ACPI video driver registered its output devices and read/write
+method for 'state' with output sysfs class. The user interface under sysfs is:
+
+linux:/sys/class/video_output # tree .
+.
+|-- CRT0
+|   |-- device -> ../../../devices/pci0000:00/0000:00:01.0
+|   |-- state
+|   |-- subsystem -> ../../../class/video_output
+|   `-- uevent
+|-- DVI0
+|   |-- device -> ../../../devices/pci0000:00/0000:00:01.0
+|   |-- state
+|   |-- subsystem -> ../../../class/video_output
+|   `-- uevent
+|-- LCD0
+|   |-- device -> ../../../devices/pci0000:00/0000:00:01.0
+|   |-- state
+|   |-- subsystem -> ../../../class/video_output
+|   `-- uevent
+`-- TV0
+   |-- device -> ../../../devices/pci0000:00/0000:00:01.0
+   |-- state
+   |-- subsystem -> ../../../class/video_output
+   `-- uevent
+

MAINTAINERS

@@ -584,6 +584,14 @@ W:	http://sourceforge.net/projects/acpi4asus
 W:	http://xf.iksaif.net/acpi4asus
 S:	Maintained
 
+ASUS LAPTOP EXTRAS DRIVER
+P:	Corentin Chary
+M:	corentincj@iksaif.net
+L:	acpi4asus-user@lists.sourceforge.net
+W:	http://sourceforge.net/projects/acpi4asus
+W:	http://xf.iksaif.net/acpi4asus
+S:	Maintained
+
 ATA OVER ETHERNET DRIVER
 P:	Ed L. Cashin
 M:	ecashin@coraid.com

arch/i386/defconfig

@@ -466,7 +466,8 @@ CONFIG_FW_LOADER=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+CONFIG_PNPACPI=y
 
 #
 # Block devices

arch/i386/kernel/acpi/earlyquirk.c

@@ -16,7 +16,7 @@
 
 static int nvidia_hpet_detected __initdata;
 
-static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+static int __init nvidia_hpet_check(struct acpi_table_header *header)
 {
 	nvidia_hpet_detected = 1;
 	return 0;
@@ -30,7 +30,7 @@ static int __init check_bridge(int vendor, int device)
 	   is enabled. */
 	if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) {
 		nvidia_hpet_detected = 0;
-		acpi_table_parse(ACPI_HPET, nvidia_hpet_check);
+		acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check);
 		if (nvidia_hpet_detected == 0) {
 			acpi_skip_timer_override = 1;
 			  printk(KERN_INFO "Nvidia board "

arch/i386/kernel/cpu/cpufreq/longhaul.c

@@ -190,7 +190,7 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
 		/* Invoke C3 */
 		inb(cx_address);
 		/* Dummy op - must do something useless after P_LVL3 read */
-		t = inl(acpi_fadt.xpm_tmr_blk.address);
+		t = inl(acpi_gbl_FADT.xpm_timer_block.address);
 	}
 	/* Disable bus ratio bit */
 	local_irq_disable();
@@ -250,8 +250,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
 		outb(3, 0x22);
 	} else if ((pr != NULL) && pr->flags.bm_control) {
  		/* Disable bus master arbitration */
-		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
-				  ACPI_MTX_DO_NOT_LOCK);
+		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
 	}
 	switch (longhaul_version) {
 
@@ -281,8 +280,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
 	case TYPE_POWERSAVER:
 		if (longhaul_flags & USE_ACPI_C3) {
 			/* Don't allow wakeup */
-			acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
-					  ACPI_MTX_DO_NOT_LOCK);
+			acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
 			do_powersaver(cx->address, clock_ratio_index);
 		} else {
 			do_powersaver(0, clock_ratio_index);
@@ -295,8 +293,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
 		outb(0, 0x22);
 	} else if ((pr != NULL) && pr->flags.bm_control) {
 		/* Enable bus master arbitration */
-		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
-				  ACPI_MTX_DO_NOT_LOCK);
+		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
 	}
 	outb(pic2_mask,0xA1);	/* restore mask */
 	outb(pic1_mask,0x21);
@@ -414,7 +411,7 @@ static int __init longhaul_get_ranges(void)
 	highest_speed = calc_speed(maxmult);
 	lowest_speed = calc_speed(minmult);
 	dprintk ("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
-		 print_speed(lowest_speed/1000), 
+		 print_speed(lowest_speed/1000),
 		 print_speed(highest_speed/1000));
 
 	if (lowest_speed == highest_speed) {
@@ -498,7 +495,7 @@ static void __init longhaul_setup_voltagescaling(void)
 		maxvid.mV/1000, maxvid.mV%1000,
 		minvid.mV/1000, minvid.mV%1000,
 		numvscales);
-	
+
 	j = 0;
 	while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
 		speed = longhaul_table[j].frequency;

arch/i386/kernel/mpparse.c

@@ -1057,7 +1057,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 	static int		gsi_to_irq[MAX_GSI_NUM];
 
 	/* Don't set up the ACPI SCI because it's already set up */
-	if (acpi_fadt.sci_int == gsi)
+	if (acpi_gbl_FADT.sci_interrupt == gsi)
 		return gsi;
 
 	ioapic = mp_find_ioapic(gsi);
@@ -1114,7 +1114,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 			/*
 			 * Don't assign IRQ used by ACPI SCI
 			 */
-			if (gsi == acpi_fadt.sci_int)
+			if (gsi == acpi_gbl_FADT.sci_interrupt)
 				gsi = pci_irq++;
 			gsi_to_irq[irq] = gsi;
 		} else {

arch/i386/kernel/srat.c

@@ -62,19 +62,19 @@ extern void * boot_ioremap(unsigned long, unsigned long);
 /* Identify CPU proximity domains */
 static void __init parse_cpu_affinity_structure(char *p)
 {
-	struct acpi_table_processor_affinity *cpu_affinity = 
-				(struct acpi_table_processor_affinity *) p;
+	struct acpi_srat_cpu_affinity *cpu_affinity =
+				(struct acpi_srat_cpu_affinity *) p;
 
-	if (!cpu_affinity->flags.enabled)
+	if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0)
 		return;		/* empty entry */
 
 	/* mark this node as "seen" in node bitmap */
-	BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain);
+	BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
 
-	apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain;
+	apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
 
 	printk("CPU 0x%02X in proximity domain 0x%02X\n",
-		cpu_affinity->apic_id, cpu_affinity->proximity_domain);
+		cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
 }
 
 /*
@@ -84,28 +84,27 @@ static void __init parse_cpu_affinity_structure(char *p)
 static void __init parse_memory_affinity_structure (char *sratp)
 {
 	unsigned long long paddr, size;
-	unsigned long start_pfn, end_pfn; 
+	unsigned long start_pfn, end_pfn;
 	u8 pxm;
 	struct node_memory_chunk_s *p, *q, *pend;
-	struct acpi_table_memory_affinity *memory_affinity =
-			(struct acpi_table_memory_affinity *) sratp;
+	struct acpi_srat_mem_affinity *memory_affinity =
+			(struct acpi_srat_mem_affinity *) sratp;
 
-	if (!memory_affinity->flags.enabled)
+	if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0)
 		return;		/* empty entry */
 
+	pxm = memory_affinity->proximity_domain & 0xff;
+
 	/* mark this node as "seen" in node bitmap */
-	BMAP_SET(pxm_bitmap, memory_affinity->proximity_domain);
+	BMAP_SET(pxm_bitmap, pxm);
 
 	/* calculate info for memory chunk structure */
-	paddr = memory_affinity->base_addr_hi;
-	paddr = (paddr << 32) | memory_affinity->base_addr_lo;
-	size = memory_affinity->length_hi;
-	size = (size << 32) | memory_affinity->length_lo;
-	
+	paddr = memory_affinity->base_address;
+	size = memory_affinity->length;
+
 	start_pfn = paddr >> PAGE_SHIFT;
 	end_pfn = (paddr + size) >> PAGE_SHIFT;
-	
-	pxm = memory_affinity->proximity_domain;
+
 
 	if (num_memory_chunks >= MAXCHUNKS) {
 		printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n",
@@ -132,8 +131,8 @@ static void __init parse_memory_affinity_structure (char *sratp)
 	printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n",
 		start_pfn, end_pfn,
 		memory_affinity->memory_type,
-		memory_affinity->proximity_domain,
-		(memory_affinity->flags.hot_pluggable ?
+		pxm,
+		((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
 		 "enabled and removable" : "enabled" ) );
 }
 
@@ -185,10 +184,10 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
 	num_memory_chunks = 0;
 	while (p < end) {
 		switch (*p) {
-		case ACPI_SRAT_PROCESSOR_AFFINITY:
+		case ACPI_SRAT_TYPE_CPU_AFFINITY:
 			parse_cpu_affinity_structure(p);
 			break;
-		case ACPI_SRAT_MEMORY_AFFINITY:
+		case ACPI_SRAT_TYPE_MEMORY_AFFINITY:
 			parse_memory_affinity_structure(p);
 			break;
 		default:
@@ -262,31 +261,30 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
 	return 0;
 }
 
+struct acpi_static_rsdt {
+	struct acpi_table_rsdt table;
+	u32 padding[7]; /* Allow for 7 more table entries */
+};
+
 int __init get_memcfg_from_srat(void)
 {
 	struct acpi_table_header *header = NULL;
 	struct acpi_table_rsdp *rsdp = NULL;
 	struct acpi_table_rsdt *rsdt = NULL;
-	struct acpi_pointer *rsdp_address = NULL;
-	struct acpi_table_rsdt saved_rsdt;
+	acpi_native_uint rsdp_address = 0;
+	struct acpi_static_rsdt saved_rsdt;
 	int tables = 0;
 	int i = 0;
 
-	if (ACPI_FAILURE(acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING,
-						rsdp_address))) {
+	rsdp_address = acpi_find_rsdp();
+	if (!rsdp_address) {
 		printk("%s: System description tables not found\n",
 		       __FUNCTION__);
 		goto out_err;
 	}
 
-	if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) {
-		printk("%s: assigning address to rsdp\n", __FUNCTION__);
-		rsdp = (struct acpi_table_rsdp *)
-				(u32)rsdp_address->pointer.physical;
-	} else {
-		printk("%s: rsdp_address is not a physical pointer\n", __FUNCTION__);
-		goto out_err;
-	}
+	printk("%s: assigning address to rsdp\n", __FUNCTION__);
+	rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address;
 	if (!rsdp) {
 		printk("%s: Didn't find ACPI root!\n", __FUNCTION__);
 		goto out_err;
@@ -295,13 +293,13 @@ int __init get_memcfg_from_srat(void)
 	printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision,
 		rsdp->oem_id);
 
-	if (strncmp(rsdp->signature, RSDP_SIG,strlen(RSDP_SIG))) {
+	if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) {
 		printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __FUNCTION__);
 		goto out_err;
 	}
 
 	rsdt = (struct acpi_table_rsdt *)
-	    boot_ioremap(rsdp->rsdt_address, sizeof(struct acpi_table_rsdt));
+	    boot_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt));
 
 	if (!rsdt) {
 		printk(KERN_WARNING
@@ -310,9 +308,9 @@ int __init get_memcfg_from_srat(void)
 		goto out_err;
 	}
 
-	header = & rsdt->header;
+	header = &rsdt->header;
 
-	if (strncmp(header->signature, RSDT_SIG, strlen(RSDT_SIG))) {
+	if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) {
 		printk(KERN_WARNING "ACPI: RSDT signature incorrect\n");
 		goto out_err;
 	}
@@ -330,9 +328,9 @@ int __init get_memcfg_from_srat(void)
 
 	memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt));
 
-	if (saved_rsdt.header.length > sizeof(saved_rsdt)) {
+	if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) {
 		printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n",
-		       saved_rsdt.header.length);
+		       saved_rsdt.table.header.length);
 		goto out_err;
 	}
 
@@ -341,15 +339,15 @@ int __init get_memcfg_from_srat(void)
 	for (i = 0; i < tables; i++) {
 		/* Map in header, then map in full table length. */
 		header = (struct acpi_table_header *)
-			boot_ioremap(saved_rsdt.entry[i], sizeof(struct acpi_table_header));
+			boot_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header));
 		if (!header)
 			break;
 		header = (struct acpi_table_header *)
-			boot_ioremap(saved_rsdt.entry[i], header->length);
+			boot_ioremap(saved_rsdt.table.table_offset_entry[i], header->length);
 		if (!header)
 			break;
 
-		if (strncmp((char *) &header->signature, "SRAT", 4))
+		if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4))
 			continue;
 
 		/* we've found the srat table. don't need to look at any more tables */

arch/i386/mach-es7000/es7000.h

@@ -84,15 +84,6 @@ struct es7000_oem_table {
 };
 
 #ifdef CONFIG_ACPI
-struct acpi_table_sdt {
-	unsigned long pa;
-	unsigned long count;
-	struct {
-		unsigned long pa;
-		enum acpi_table_id id;
-		unsigned long size;
-	}	entry[50];
-};
 
 struct oem_table {
 	struct acpi_table_header Header;

arch/i386/mach-es7000/es7000plat.c

@@ -160,51 +160,14 @@ parse_unisys_oem (char *oemptr)
 int __init
 find_unisys_acpi_oem_table(unsigned long *oem_addr)
 {
-	struct acpi_table_rsdp		*rsdp = NULL;
-	unsigned long			rsdp_phys = 0;
-	struct acpi_table_header 	*header = NULL;
-	int				i;
-	struct acpi_table_sdt		sdt;
-
-	rsdp_phys = acpi_find_rsdp();
-	rsdp = __va(rsdp_phys);
-	if (rsdp->rsdt_address) {
-		struct acpi_table_rsdt	*mapped_rsdt = NULL;
-		sdt.pa = rsdp->rsdt_address;
-
-		header = (struct acpi_table_header *)
-			__acpi_map_table(sdt.pa, sizeof(struct acpi_table_header));
-		if (!header)
-			return -ENODEV;
-
-		sdt.count = (header->length - sizeof(struct acpi_table_header)) >> 3;
-		mapped_rsdt = (struct acpi_table_rsdt *)
-			__acpi_map_table(sdt.pa, header->length);
-		if (!mapped_rsdt)
-			return -ENODEV;
-
-		header = &mapped_rsdt->header;
-
-		for (i = 0; i < sdt.count; i++)
-			sdt.entry[i].pa = (unsigned long) mapped_rsdt->entry[i];
-	};
-	for (i = 0; i < sdt.count; i++) {
-
-		header = (struct acpi_table_header *)
-			__acpi_map_table(sdt.entry[i].pa,
-				sizeof(struct acpi_table_header));
-		if (!header)
-			continue;
-		if (!strncmp((char *) &header->signature, "OEM1", 4)) {
-			if (!strncmp((char *) &header->oem_id, "UNISYS", 6)) {
-				void *addr;
-				struct oem_table *t;
-				acpi_table_print(header, sdt.entry[i].pa);
-				t = (struct oem_table *) __acpi_map_table(sdt.entry[i].pa, header->length);
-				addr = (void *) __acpi_map_table(t->OEMTableAddr, t->OEMTableSize);
-				*oem_addr = (unsigned long) addr;
-				return 0;
-			}
+	struct acpi_table_header *header = NULL;
+	int i = 0;
+	while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
+		if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
+			struct oem_table *t = (struct oem_table *)header;
+			*oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr,
+								    t->OEMTableSize);
+			return 0;
 		}
 	}
 	return -1;

arch/i386/pci/mmconfig.c

@@ -36,7 +36,7 @@ static DECLARE_BITMAP(fallback_slots, MAX_CHECK_BUS*32);
 static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
 {
 	int cfg_num = -1;
-	struct acpi_table_mcfg_config *cfg;
+	struct acpi_mcfg_allocation *cfg;
 
 	if (seg == 0 && bus < MAX_CHECK_BUS &&
 	    test_bit(PCI_SLOT(devfn) + 32*bus, fallback_slots))
@@ -48,11 +48,11 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
 			break;
 		}
 		cfg = &pci_mmcfg_config[cfg_num];
-		if (cfg->pci_segment_group_number != seg)
+		if (cfg->pci_segment != seg)
 			continue;
 		if ((cfg->start_bus_number <= bus) &&
 		    (cfg->end_bus_number >= bus))
-			return cfg->base_address;
+			return cfg->address;
 	}
 
 	/* Handle more broken MCFG tables on Asus etc.
@@ -60,9 +60,9 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
  	   this applies to all busses. */
 	cfg = &pci_mmcfg_config[0];
 	if (pci_mmcfg_config_num == 1 &&
-		cfg->pci_segment_group_number == 0 &&
+		cfg->pci_segment == 0 &&
 		(cfg->start_bus_number | cfg->end_bus_number) == 0)
-		return cfg->base_address;
+		return cfg->address;
 
 	/* Fall back to type 0 */
 	return 0;
@@ -125,7 +125,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 	unsigned long flags;
 	u32 base;
 
-	if ((bus > 255) || (devfn > 255) || (reg > 4095)) 
+	if ((bus > 255) || (devfn > 255) || (reg > 4095))
 		return -EINVAL;
 
 	base = get_base_addr(seg, bus, devfn);
@@ -199,19 +199,19 @@ void __init pci_mmcfg_init(int type)
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		return;
 
-	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+	acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
 	if ((pci_mmcfg_config_num == 0) ||
 	    (pci_mmcfg_config == NULL) ||
-	    (pci_mmcfg_config[0].base_address == 0))
+	    (pci_mmcfg_config[0].address == 0))
 		return;
 
 	/* Only do this check when type 1 works. If it doesn't work
 	   assume we run on a Mac and always use MCFG */
-	if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
-			pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
+	if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address,
+			pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
 			E820_RESERVED)) {
-		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
-				pci_mmcfg_config[0].base_address);
+		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n",
+				(unsigned long)pci_mmcfg_config[0].address);
 		printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
 		return;
 	}

arch/ia64/sn/kernel/io_common.c

@@ -26,14 +26,10 @@
 #include <linux/acpi.h>
 #include <asm/sn/sn2/sn_hwperf.h>
 #include <asm/sn/acpi.h>
+#include "acpi/acglobal.h"
 
 extern void sn_init_cpei_timer(void);
 extern void register_sn_procfs(void);
-extern void sn_acpi_bus_fixup(struct pci_bus *);
-extern void sn_bus_fixup(struct pci_bus *);
-extern void sn_acpi_slot_fixup(struct pci_dev *, struct pcidev_info *);
-extern void sn_more_slot_fixup(struct pci_dev *, struct pcidev_info *);
-extern void sn_legacy_pci_window_fixup(struct pci_controller *, u64, u64);
 extern void sn_io_acpi_init(void);
 extern void sn_io_init(void);
 
@@ -48,6 +44,9 @@ struct sysdata_el {
 
 int sn_ioif_inited;		/* SN I/O infrastructure initialized? */
 
+int sn_acpi_rev;		/* SN ACPI revision */
+EXPORT_SYMBOL_GPL(sn_acpi_rev);
+
 struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES];	/* indexed by asic type */
 
 /*
@@ -98,25 +97,6 @@ sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
 	return ret_stuff.status;
 }
 
-/*
- * Retrieve the pci device information given the bus and device|function number.
- */
-static inline u64
-sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
-		    u64 sn_irq_info)
-{
-	struct ia64_sal_retval ret_stuff;
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-
-	SAL_CALL_NOLOCK(ret_stuff,
-			(u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
-			(u64) segment, (u64) bus_number, (u64) devfn,
-			(u64) pci_dev,
-			sn_irq_info, 0, 0);
-	return ret_stuff.v0;
-}
-
 /*
  * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified
  *			  device.
@@ -249,50 +229,25 @@ void sn_pci_unfixup_slot(struct pci_dev *dev)
 }
 
 /*
- * sn_pci_fixup_slot() - This routine sets up a slot's resources consistent
- *			 with the Linux PCI abstraction layer. Resources
- *			 acquired from our PCI provider include PIO maps
- *			 to BAR space and interrupt objects.
+ * sn_pci_fixup_slot()
  */
-void sn_pci_fixup_slot(struct pci_dev *dev)
+void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *pcidev_info,
+		       struct sn_irq_info *sn_irq_info)
 {
 	int segment = pci_domain_nr(dev->bus);
-	int status = 0;
 	struct pcibus_bussoft *bs;
- 	struct pci_bus *host_pci_bus;
- 	struct pci_dev *host_pci_dev;
-	struct pcidev_info *pcidev_info;
- 	struct sn_irq_info *sn_irq_info;
- 	unsigned int bus_no, devfn;
+	struct pci_bus *host_pci_bus;
+	struct pci_dev *host_pci_dev;
+	unsigned int bus_no, devfn;
 
 	pci_dev_get(dev); /* for the sysdata pointer */
-	pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
-	if (!pcidev_info)
-		BUG();		/* Cannot afford to run out of memory */
-
-	sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
-	if (!sn_irq_info)
-		BUG();		/* Cannot afford to run out of memory */
-
-	/* Call to retrieve pci device information needed by kernel. */
-	status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number,
-				     dev->devfn,
-				     (u64) __pa(pcidev_info),
-				     (u64) __pa(sn_irq_info));
-	if (status)
-		BUG(); /* Cannot get platform pci device information */
 
 	/* Add pcidev_info to list in pci_controller.platform_data */
 	list_add_tail(&pcidev_info->pdi_list,
 		      &(SN_PLATFORM_DATA(dev->bus)->pcidev_info));
-
-	if (SN_ACPI_BASE_SUPPORT())
-		sn_acpi_slot_fixup(dev, pcidev_info);
-	else
-		sn_more_slot_fixup(dev, pcidev_info);
 	/*
 	 * Using the PROMs values for the PCI host bus, get the Linux
- 	 * PCI host_pci_dev struct and set up host bus linkages
+	 * PCI host_pci_dev struct and set up host bus linkages
  	 */
 
 	bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff;
@@ -489,11 +444,6 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address)
 			sprintf(address, "%s^%d", address, geo_slot(geoid));
 }
 
-/*
- * sn_pci_fixup_bus() - Perform SN specific setup of software structs
- *			(pcibus_bussoft, pcidev_info) and hardware
- *			registers, for the specified bus and devices under it.
- */
 void __devinit
 sn_pci_fixup_bus(struct pci_bus *bus)
 {
@@ -519,6 +469,15 @@ sn_io_early_init(void)
 	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
 		return 0;
 
+	/* we set the acpi revision to that of the DSDT table OEM rev. */
+	{
+		struct acpi_table_header *header = NULL;
+
+		acpi_get_table_by_index(ACPI_TABLE_INDEX_DSDT, &header);
+		BUG_ON(header == NULL);
+		sn_acpi_rev = header->oem_revision;
+	}
+
 	/*
 	 * prime sn_pci_provider[].  Individial provider init routines will
 	 * override their respective default entries.
@@ -544,8 +503,12 @@ sn_io_early_init(void)
 	register_sn_procfs();
 #endif
 
-	printk(KERN_INFO "ACPI  DSDT OEM Rev 0x%x\n",
-	       acpi_gbl_DSDT->oem_revision);
+	{
+		struct acpi_table_header *header;
+		(void)acpi_get_table_by_index(ACPI_TABLE_INDEX_DSDT, &header);
+		printk(KERN_INFO "ACPI  DSDT OEM Rev 0x%x\n",
+			header->oem_revision);
+	}
 	if (SN_ACPI_BASE_SUPPORT())
 		sn_io_acpi_init();
 	else
@@ -605,7 +568,6 @@ sn_io_late_init(void)
 
 fs_initcall(sn_io_late_init);
 
-EXPORT_SYMBOL(sn_pci_fixup_slot);
 EXPORT_SYMBOL(sn_pci_unfixup_slot);
 EXPORT_SYMBOL(sn_bus_store_sysdata);
 EXPORT_SYMBOL(sn_bus_free_sysdata);

arch/ia64/sn/kernel/io_init.c

@@ -56,6 +56,25 @@ static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address)
 	return ret_stuff.v0;
 }
 
+/*
+ * Retrieve the pci device information given the bus and device|function number.
+ */
+static inline u64
+sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
+		    u64 sn_irq_info)
+{
+	struct ia64_sal_retval ret_stuff;
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+
+	SAL_CALL_NOLOCK(ret_stuff,
+			(u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
+			(u64) segment, (u64) bus_number, (u64) devfn,
+			(u64) pci_dev,
+			sn_irq_info, 0, 0);
+	return ret_stuff.v0;
+}
+
 
 /*
  * sn_fixup_ionodes() - This routine initializes the HUB data structure for
@@ -172,18 +191,40 @@ sn_pci_window_fixup(struct pci_dev *dev, unsigned int count,
 }
 
 /*
- * sn_more_slot_fixup() - We are not running with an ACPI capable PROM,
+ * sn_io_slot_fixup() -   We are not running with an ACPI capable PROM,
  *			  and need to convert the pci_dev->resource
  *			  'start' and 'end' addresses to mapped addresses,
  *			  and setup the pci_controller->window array entries.
  */
 void
-sn_more_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info)
+sn_io_slot_fixup(struct pci_dev *dev)
 {
 	unsigned int count = 0;
 	int idx;
 	s64 pci_addrs[PCI_ROM_RESOURCE + 1];
 	unsigned long addr, end, size, start;
+	struct pcidev_info *pcidev_info;
+	struct sn_irq_info *sn_irq_info;
+	int status;
+
+	pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
+	if (!pcidev_info)
+		panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+
+	sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
+	if (!sn_irq_info)
+		panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+
+	/* Call to retrieve pci device information needed by kernel. */
+	status = sal_get_pcidev_info((u64) pci_domain_nr(dev),
+		(u64) dev->bus->number,
+		dev->devfn,
+		(u64) __pa(pcidev_info),
+		(u64) __pa(sn_irq_info));
+
+	if (status)
+		BUG(); /* Cannot get platform pci device information */
+
 
 	/* Copy over PIO Mapped Addresses */
 	for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
@@ -219,8 +260,12 @@ sn_more_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info)
 	 */
 	if (count > 0)
 		sn_pci_window_fixup(dev, count, pci_addrs);
+
+	sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
 }
 
+EXPORT_SYMBOL(sn_io_slot_fixup);
+
 /*
  * sn_pci_controller_fixup() - This routine sets up a bus's resources
  *			       consistent with the Linux PCI abstraction layer.
@@ -272,9 +317,6 @@ sn_bus_fixup(struct pci_bus *bus)
 {
 	struct pci_dev *pci_dev = NULL;
 	struct pcibus_bussoft *prom_bussoft_ptr;
-	extern void sn_common_bus_fixup(struct pci_bus *,
-					struct pcibus_bussoft *);
-
 
 	if (!bus->parent) {  /* If root bus */
 		prom_bussoft_ptr = PCI_CONTROLLER(bus)->platform_data;
@@ -291,7 +333,7 @@ sn_bus_fixup(struct pci_bus *bus)
 					   prom_bussoft_ptr->bs_legacy_mem);
         }
         list_for_each_entry(pci_dev, &bus->devices, bus_list) {
-                sn_pci_fixup_slot(pci_dev);
+                sn_io_slot_fixup(pci_dev);
         }
 
 }

arch/ia64/sn/kernel/iomv.c

-/* 
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -26,9 +26,10 @@
  * @port: port to convert
  *
  * Legacy in/out instructions are converted to ld/st instructions
- * on IA64.  This routine will convert a port number into a valid 
+ * on IA64.  This routine will convert a port number into a valid
  * SN i/o address.  Used by sn_in*() and sn_out*().
  */
+
 void *sn_io_addr(unsigned long port)
 {
 	if (!IS_RUNNING_ON_SIMULATOR()) {

arch/ia64/sn/pci/pcibr/pcibr_provider.c

@@ -20,7 +20,8 @@
 #include "xtalk/hubdev.h"
 
 int
-sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp)
+sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp,
+                      char **ssdt)
 {
 	struct ia64_sal_retval ret_stuff;
 	u64 busnum;
@@ -32,7 +33,8 @@ sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp)
 	segment = soft->pbi_buscommon.bs_persist_segment;
 	busnum = soft->pbi_buscommon.bs_persist_busnum;
 	SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_ENABLE, segment,
-			busnum, (u64) device, (u64) resp, 0, 0, 0);
+			busnum, (u64) device, (u64) resp, (u64)ia64_tpa(ssdt),
+			0, 0);
 
 	return (int)ret_stuff.v0;
 }

arch/x86_64/kernel/early-quirks.c

@@ -32,7 +32,7 @@ static void via_bugs(void)
 
 static int nvidia_hpet_detected __initdata;
 
-static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+static int __init nvidia_hpet_check(struct acpi_table_header *header)
 {
 	nvidia_hpet_detected = 1;
 	return 0;
@@ -53,7 +53,7 @@ static void nvidia_bugs(void)
 		return;
 
 	nvidia_hpet_detected = 0;
-	acpi_table_parse(ACPI_HPET, nvidia_hpet_check);
+	acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check);
 	if (nvidia_hpet_detected == 0) {
 		acpi_skip_timer_override = 1;
 		printk(KERN_INFO "Nvidia board "

arch/x86_64/kernel/genapic.c

@@ -58,8 +58,8 @@ void __init clustered_apic_check(void)
 	 * Some x86_64 machines use physical APIC mode regardless of how many
 	 * procs/clusters are present (x86_64 ES7000 is an example).
 	 */
-	if (acpi_fadt.revision > FADT2_REVISION_ID)
-		if (acpi_fadt.force_apic_physical_destination_mode) {
+	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID)
+		if (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) {
 			genapic = &apic_cluster;
 			goto print;
 		}

arch/x86_64/kernel/mpparse.c

@@ -798,7 +798,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		return gsi;
 
 	/* Don't set up the ACPI SCI because it's already set up */
-	if (acpi_fadt.sci_int == gsi)
+	if (acpi_gbl_FADT.sci_interrupt == gsi)
 		return gsi;
 
 	ioapic = mp_find_ioapic(gsi);

arch/x86_64/kernel/time.c

@@ -498,7 +498,7 @@ static unsigned long get_cmos_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 	unsigned long flags;
-	unsigned extyear = 0;
+	unsigned century = 0;
 
 	spin_lock_irqsave(&rtc_lock, flags);
 
@@ -510,9 +510,9 @@ static unsigned long get_cmos_time(void)
 		mon = CMOS_READ(RTC_MONTH);
 		year = CMOS_READ(RTC_YEAR);
 #ifdef CONFIG_ACPI
-		if (acpi_fadt.revision >= FADT2_REVISION_ID &&
-					acpi_fadt.century)
-			extyear = CMOS_READ(acpi_fadt.century);
+		if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+					acpi_gbl_FADT.century)
+			century = CMOS_READ(acpi_gbl_FADT.century);
 #endif
 	} while (sec != CMOS_READ(RTC_SECONDS));
 
@@ -530,10 +530,10 @@ static unsigned long get_cmos_time(void)
 	BCD_TO_BIN(mon);
 	BCD_TO_BIN(year);
 
-	if (extyear) {
-		BCD_TO_BIN(extyear);
-		year += extyear;
-		printk(KERN_INFO "Extended CMOS year: %d\n", extyear);
+	if (century) {
+		BCD_TO_BIN(century);
+		year += century * 100;
+		printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
 	} else { 
 		/*
 		 * x86-64 systems only exists since 2002.
@@ -954,7 +954,7 @@ __cpuinit int unsynchronized_tsc(void)
  	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) {
 #ifdef CONFIG_ACPI
 		/* But TSC doesn't tick in C3 so don't use it there */
-		if (acpi_fadt.length > 0 && acpi_fadt.plvl3_lat < 1000)
+		if (acpi_gbl_FADT.header.length > 0 && acpi_gbl_FADT.C3latency < 1000)
 			return 1;
 #endif
  		return 0;

arch/x86_64/mm/srat.c

@@ -101,7 +101,7 @@ static __init inline int srat_disabled(void)
 static __init int slit_valid(struct acpi_table_slit *slit)
 {
 	int i, j;
-	int d = slit->localities;
+	int d = slit->locality_count;
 	for (i = 0; i < d; i++) {
 		for (j = 0; j < d; j++)  {
 			u8 val = slit->entry[d*i + j];
@@ -127,18 +127,18 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
 
 /* Callback for Proximity Domain -> LAPIC mapping */
 void __init
-acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
+acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 {
 	int pxm, node;
 	if (srat_disabled())
 		return;
-	if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {
+	if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
 		bad_srat();
 		return;
 	}
-	if (pa->flags.enabled == 0)
+	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
 		return;
-	pxm = pa->proximity_domain;
+	pxm = pa->proximity_domain_lo;
 	node = setup_node(pxm);
 	if (node < 0) {
 		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
@@ -254,21 +254,21 @@ static int reserve_hotadd(int node, unsigned long start, unsigned long end)
 	/* Looks good */
 
 	if (nd->start == nd->end) {
- 		nd->start = start;
- 		nd->end = end;
+		nd->start = start;
+		nd->end = end;
 		changed = 1;
- 	} else {
- 		if (nd->start == end) {
- 			nd->start = start;
+	} else {
+		if (nd->start == end) {
+			nd->start = start;
 			changed = 1;
 		}
- 		if (nd->end == start) {
- 			nd->end = end;
+		if (nd->end == start) {
+			nd->end = end;
 			changed = 1;
 		}
 		if (!changed)
 			printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
- 	}
+	}
 
 	ret = update_end_of_memory(nd->end);
 
@@ -279,7 +279,7 @@ static int reserve_hotadd(int node, unsigned long start, unsigned long end)
 
 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
 void __init
-acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 {
 	struct bootnode *nd, oldnode;
 	unsigned long start, end;
@@ -288,16 +288,17 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
 
 	if (srat_disabled())
 		return;
-	if (ma->header.length != sizeof(struct acpi_table_memory_affinity)) {
+	if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) {
 		bad_srat();
 		return;
 	}
-	if (ma->flags.enabled == 0)
+	if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
 		return;
- 	if (ma->flags.hot_pluggable && !save_add_info())
+
+	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
 		return;
-	start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
-	end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
+	start = ma->base_address;
+	end = start + ma->length;
 	pxm = ma->proximity_domain;
 	node = setup_node(pxm);
 	if (node < 0) {
@@ -337,7 +338,8 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
 	push_node_boundaries(node, nd->start >> PAGE_SHIFT,
 						nd->end >> PAGE_SHIFT);
 
- 	if (ma->flags.hot_pluggable && (reserve_hotadd(node, start, end) < 0)) {
+	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) &&
+	    (reserve_hotadd(node, start, end) < 0)) {
 		/* Ignore hotadd region. Undo damage */
 		printk(KERN_NOTICE "SRAT: Hotplug region ignored\n");
 		*nd = oldnode;
@@ -394,7 +396,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 
 	/* First clean up the node list */
 	for (i = 0; i < MAX_NUMNODES; i++) {
- 		cutoff_node(i, start, end);
+		cutoff_node(i, start, end);
 		if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
 			unparse_node(i);
 			node_set_offline(i);
@@ -426,7 +428,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		if (!node_online(i))
 			setup_node_bootmem(i, nodes[i].start, nodes[i].end);
 
-	for (i = 0; i < NR_CPUS; i++) { 
+	for (i = 0; i < NR_CPUS; i++) {
 		if (cpu_to_node[i] == NUMA_NO_NODE)
 			continue;
 		if (!node_isset(cpu_to_node[i], nodes_parsed))
@@ -461,7 +463,7 @@ int __node_distance(int a, int b)
 
 	if (!acpi_slit)
 		return a == b ? 10 : 20;
-	index = acpi_slit->localities * node_to_pxm(a);
+	index = acpi_slit->locality_count * node_to_pxm(a);
 	return acpi_slit->entry[index + node_to_pxm(b)];
 }
 

arch/x86_64/pci/mmconfig.c

 /*
  * mmconfig.c - Low-level direct PCI config space access via MMCONFIG
- * 
+ *
  * This is an 64bit optimized version that always keeps the full mmconfig
  * space mapped. This allows lockless config space operation.
  */
@@ -25,7 +25,7 @@ static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS);
 
 /* Static virtual mapping of the MMCONFIG aperture */
 struct mmcfg_virt {
-	struct acpi_table_mcfg_config *cfg;
+	struct acpi_mcfg_allocation *cfg;
 	char __iomem *virt;
 };
 static struct mmcfg_virt *pci_mmcfg_virt;
@@ -33,14 +33,14 @@ static struct mmcfg_virt *pci_mmcfg_virt;
 static char __iomem *get_virt(unsigned int seg, unsigned bus)
 {
 	int cfg_num = -1;
-	struct acpi_table_mcfg_config *cfg;
+	struct acpi_mcfg_allocation *cfg;
 
 	while (1) {
 		++cfg_num;
 		if (cfg_num >= pci_mmcfg_config_num)
 			break;
 		cfg = pci_mmcfg_virt[cfg_num].cfg;
-		if (cfg->pci_segment_group_number != seg)
+		if (cfg->pci_segment != seg)
 			continue;
 		if ((cfg->start_bus_number <= bus) &&
 		    (cfg->end_bus_number >= bus))
@@ -52,7 +52,7 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus)
  	   this applies to all busses. */
 	cfg = &pci_mmcfg_config[0];
 	if (pci_mmcfg_config_num == 1 &&
-		cfg->pci_segment_group_number == 0 &&
+		cfg->pci_segment == 0 &&
 		(cfg->start_bus_number | cfg->end_bus_number) == 0)
 		return pci_mmcfg_virt[0].virt;
 
@@ -170,19 +170,19 @@ void __init pci_mmcfg_init(int type)
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		return;
 
-	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+	acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
 	if ((pci_mmcfg_config_num == 0) ||
 	    (pci_mmcfg_config == NULL) ||
-	    (pci_mmcfg_config[0].base_address == 0))
+	    (pci_mmcfg_config[0].address == 0))
 		return;
 
 	/* Only do this check when type 1 works. If it doesn't work
            assume we run on a Mac and always use MCFG */
-	if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
-			pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
+	if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address,
+			pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
 			E820_RESERVED)) {
-		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
-				pci_mmcfg_config[0].base_address);
+		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n",
+				(unsigned long)pci_mmcfg_config[0].address);
 		printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
 		return;
 	}
@@ -194,15 +194,16 @@ void __init pci_mmcfg_init(int type)
 	}
 	for (i = 0; i < pci_mmcfg_config_num; ++i) {
 		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
-		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
+		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address,
 							 MMCONFIG_APER_MAX);
 		if (!pci_mmcfg_virt[i].virt) {
 			printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
 					"segment %d\n",
-			       pci_mmcfg_config[i].pci_segment_group_number);
+				pci_mmcfg_config[i].pci_segment);
 			return;
 		}
-		printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
+		printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n",
+			(unsigned long)pci_mmcfg_config[i].address);
 	}
 
 	unreachable_devices();

drivers/acpi/Kconfig

@@ -3,6 +3,7 @@
 #
 
 menu "ACPI (Advanced Configuration and Power Interface) Support"
+	depends on !X86_NUMAQ
 	depends on !X86_VISWS
 	depends on !IA64_HP_SIM
 	depends on IA64 || X86
@@ -77,6 +78,20 @@ config ACPI_SLEEP_PROC_SLEEP
 	  Create /proc/acpi/sleep
 	  Deprecated by /sys/power/state
 
+config ACPI_PROCFS
+	bool "Procfs interface (deprecated)"
+	depends on ACPI
+	default y
+	---help---
+	  Procfs interface for ACPI is made optional for back-compatible.
+	  As the same functions are duplicated in sysfs interface
+	  and this proc interface will be removed some time later,
+	  it's marked as deprecated.
+	  ( /proc/acpi/debug_layer && debug_level are deprecated by
+	    /sys/module/acpi/parameters/debug_layer && debug_level.
+	    /proc/acpi/info is deprecated by
+	    /sys/module/acpi/parameters/acpica_version )
+
 config ACPI_AC
 	tristate "AC Adapter"
 	depends on X86
@@ -107,7 +122,7 @@ config ACPI_BUTTON
 
 config ACPI_VIDEO
 	tristate "Video"
-	depends on X86
+	depends on X86 && BACKLIGHT_CLASS_DEVICE
 	help
 	  This driver implement the ACPI Extensions For Display Adapters
 	  for integrated graphics devices on motherboard, as specified in
@@ -139,6 +154,13 @@ config ACPI_DOCK
 	help
 	  This driver adds support for ACPI controlled docking stations
 
+config ACPI_BAY
+	tristate "Removable Drive Bay (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  This driver adds support for ACPI controlled removable drive
+	  bays such as the IBM ultrabay or the Dell Module Bay.
+
 config ACPI_PROCESSOR
 	tristate "Processor"
 	default y
@@ -186,19 +208,22 @@ config ACPI_ASUS
 
 	  Note: display switching code is currently considered EXPERIMENTAL,
 	  toying with these values may even lock your machine.
-          
+
           All settings are changed via /proc/acpi/asus directory entries. Owner
           and group for these entries can be set with asus_uid and asus_gid
           parameters.
-          
+
           More information and a userspace daemon for handling the extra buttons
           at <http://sourceforge.net/projects/acpi4asus/>.
-          
+
           If you have an ACPI-compatible ASUS laptop, say Y or M here. This
           driver is still under development, so if your laptop is unsupported or
           something works not quite as expected, please use the mailing list
-          available on the above page (acpi4asus-user@lists.sourceforge.net)
-          
+          available on the above page (acpi4asus-user@lists.sourceforge.net).
+
+	  NOTE: This driver is deprecated and will probably be removed soon,
+	  use asus-laptop instead.
+
 config ACPI_IBM
 	tristate "IBM ThinkPad Laptop Extras"
 	depends on X86

drivers/acpi/Makefile

@@ -37,13 +37,15 @@ endif
 
 obj-y				+= sleep/
 obj-y				+= bus.o glue.o
+obj-y				+= scan.o
 obj-$(CONFIG_ACPI_AC) 		+= ac.o
 obj-$(CONFIG_ACPI_BATTERY)	+= battery.o
 obj-$(CONFIG_ACPI_BUTTON)	+= button.o
 obj-$(CONFIG_ACPI_EC)		+= ec.o
 obj-$(CONFIG_ACPI_FAN)		+= fan.o
 obj-$(CONFIG_ACPI_DOCK)		+= dock.o
-obj-$(CONFIG_ACPI_VIDEO)	+= video.o 
+obj-$(CONFIG_ACPI_BAY)		+= bay.o
+obj-$(CONFIG_ACPI_VIDEO)	+= video.o
 obj-$(CONFIG_ACPI_HOTKEY)	+= hotkey.o
 obj-y				+= pci_root.o pci_link.o pci_irq.o pci_bind.o
 obj-$(CONFIG_ACPI_POWER)	+= power.o
@@ -56,7 +58,6 @@ obj-$(CONFIG_ACPI_NUMA)		+= numa.o
 obj-$(CONFIG_ACPI_ASUS)		+= asus_acpi.o
 obj-$(CONFIG_ACPI_IBM)		+= ibm_acpi.o
 obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
-obj-y				+= scan.o motherboard.o
 obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)	+= acpi_memhotplug.o
 obj-y				+= cm_sbs.o
 obj-$(CONFIG_ACPI_SBS)		+= i2c_ec.o sbs.o

drivers/acpi/asus_acpi.c

@@ -26,7 +26,7 @@
  *  Pontus Fuchs   - Helper functions, cleanup
  *  Johann Wiesner - Small compile fixes
  *  John Belmonte  - ACPI code for Toshiba laptop was a good starting point.
- *  ric Burghard  - LED display support for W1N
+ *  �ic Burghard  - LED display support for W1N
  *
  */
 
@@ -1128,7 +1128,6 @@ static int asus_model_match(char *model)
 static int asus_hotk_get_info(void)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	struct acpi_buffer dsdt = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *model = NULL;
 	int bsts_result;
 	char *string = NULL;
@@ -1142,11 +1141,9 @@ static int asus_hotk_get_info(void)
 	 * HID), this bit will be moved. A global variable asus_info contains
 	 * the DSDT header.
 	 */
-	status = acpi_get_table(ACPI_TABLE_ID_DSDT, 1, &dsdt);
+	status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
 	if (ACPI_FAILURE(status))
 		printk(KERN_WARNING "  Couldn't get the DSDT table header\n");
-	else
-		asus_info = dsdt.pointer;
 
 	/* We have to write 0 on init this far for all ASUS models */
 	if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
@@ -1358,8 +1355,6 @@ static void __exit asus_acpi_exit(void)
 	acpi_bus_unregister_driver(&asus_hotk_driver);
 	remove_proc_entry(PROC_ASUS, acpi_root_dir);
 
-	kfree(asus_info);
-
 	return;
 }
 

drivers/acpi/battery.c

@@ -64,7 +64,7 @@ extern void *acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir);
 
 static int acpi_battery_add(struct acpi_device *device);
 static int acpi_battery_remove(struct acpi_device *device, int type);
-static int acpi_battery_resume(struct acpi_device *device, int status);
+static int acpi_battery_resume(struct acpi_device *device);
 
 static struct acpi_driver acpi_battery_driver = {
 	.name = ACPI_BATTERY_DRIVER_NAME,
@@ -753,7 +753,7 @@ static int acpi_battery_remove(struct acpi_device *device, int type)
 }
 
 /* this is needed to learn about changes made in suspended state */
-static int acpi_battery_resume(struct acpi_device *device, int state)
+static int acpi_battery_resume(struct acpi_device *device)
 {
 	struct acpi_battery *battery;
 

drivers/acpi/blacklist.c

@@ -44,7 +44,7 @@ struct acpi_blacklist_item {
 	char oem_id[7];
 	char oem_table_id[9];
 	u32 oem_revision;
-	acpi_table_type table;
+	char *table;
 	enum acpi_blacklist_predicates oem_revision_predicate;
 	char *reason;
 	u32 is_critical_error;
@@ -56,18 +56,18 @@ struct acpi_blacklist_item {
  */
 static struct acpi_blacklist_item acpi_blacklist[] __initdata = {
 	/* Compaq Presario 1700 */
-	{"PTLTD ", "  DSDT  ", 0x06040000, ACPI_DSDT, less_than_or_equal,
+	{"PTLTD ", "  DSDT  ", 0x06040000, ACPI_SIG_DSDT, less_than_or_equal,
 	 "Multiple problems", 1},
 	/* Sony FX120, FX140, FX150? */
-	{"SONY  ", "U0      ", 0x20010313, ACPI_DSDT, less_than_or_equal,
+	{"SONY  ", "U0      ", 0x20010313, ACPI_SIG_DSDT, less_than_or_equal,
 	 "ACPI driver problem", 1},
 	/* Compaq Presario 800, Insyde BIOS */
-	{"INT440", "SYSFexxx", 0x00001001, ACPI_DSDT, less_than_or_equal,
+	{"INT440", "SYSFexxx", 0x00001001, ACPI_SIG_DSDT, less_than_or_equal,
 	 "Does not use _REG to protect EC OpRegions", 1},
 	/* IBM 600E - _ADR should return 7, but it returns 1 */
-	{"IBM   ", "TP600E  ", 0x00000105, ACPI_DSDT, less_than_or_equal,
+	{"IBM   ", "TP600E  ", 0x00000105, ACPI_SIG_DSDT, less_than_or_equal,
 	 "Incorrect _ADR", 1},
-	{"ASUS\0\0", "P2B-S   ", 0, ACPI_DSDT, all_versions,
+	{"ASUS\0\0", "P2B-S   ", 0, ACPI_SIG_DSDT, all_versions,
 	 "Bogus PCI routing", 1},
 
 	{""}
@@ -79,7 +79,7 @@ static int __init blacklist_by_year(void)
 {
 	int year = dmi_get_year(DMI_BIOS_DATE);
 	/* Doesn't exist? Likely an old system */
-	if (year == -1) 
+	if (year == -1)
 		return 1;
 	/* 0? Likely a buggy new BIOS */
 	if (year == 0)
@@ -103,22 +103,21 @@ int __init acpi_blacklisted(void)
 {
 	int i = 0;
 	int blacklisted = 0;
-	struct acpi_table_header *table_header;
+	struct acpi_table_header table_header;
 
 	while (acpi_blacklist[i].oem_id[0] != '\0') {
-		if (acpi_get_table_header_early
-		    (acpi_blacklist[i].table, &table_header)) {
+		if (acpi_get_table_header(acpi_blacklist[i].table, 0, &table_header)) {
 			i++;
 			continue;
 		}
 
-		if (strncmp(acpi_blacklist[i].oem_id, table_header->oem_id, 6)) {
+		if (strncmp(acpi_blacklist[i].oem_id, table_header.oem_id, 6)) {
 			i++;
 			continue;
 		}
 
 		if (strncmp
-		    (acpi_blacklist[i].oem_table_id, table_header->oem_table_id,
+		    (acpi_blacklist[i].oem_table_id, table_header.oem_table_id,
 		     8)) {
 			i++;
 			continue;
@@ -127,14 +126,14 @@ int __init acpi_blacklisted(void)
 		if ((acpi_blacklist[i].oem_revision_predicate == all_versions)
 		    || (acpi_blacklist[i].oem_revision_predicate ==
 			less_than_or_equal
-			&& table_header->oem_revision <=
+			&& table_header.oem_revision <=
 			acpi_blacklist[i].oem_revision)
 		    || (acpi_blacklist[i].oem_revision_predicate ==
 			greater_than_or_equal
-			&& table_header->oem_revision >=
+			&& table_header.oem_revision >=
 			acpi_blacklist[i].oem_revision)
 		    || (acpi_blacklist[i].oem_revision_predicate == equal
-			&& table_header->oem_revision ==
+			&& table_header.oem_revision ==
 			acpi_blacklist[i].oem_revision)) {
 
 			printk(KERN_ERR PREFIX

drivers/acpi/bus.c

@@ -44,9 +44,6 @@ ACPI_MODULE_NAME("acpi_bus")
 extern void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger);
 #endif
 
-struct fadt_descriptor acpi_fadt;
-EXPORT_SYMBOL(acpi_fadt);
-
 struct acpi_device *acpi_root;
 struct proc_dir_entry *acpi_root_dir;
 EXPORT_SYMBOL(acpi_root_dir);
@@ -195,7 +192,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
 
 	if (!device->flags.power_manageable) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable\n",
-				device->kobj.name));
+				device->dev.kobj.name));
 		return -ENODEV;
 	}
 	/*
@@ -582,11 +579,12 @@ static int __init acpi_bus_init_irq(void)
 	return 0;
 }
 
+acpi_native_uint acpi_gbl_permanent_mmap;
+
+
 void __init acpi_early_init(void)
 {
 	acpi_status status = AE_OK;
-	struct acpi_buffer buffer = { sizeof(acpi_fadt), &acpi_fadt };
-
 
 	if (acpi_disabled)
 		return;
@@ -597,6 +595,15 @@ void __init acpi_early_init(void)
 	if (!acpi_strict)
 		acpi_gbl_enable_interpreter_slack = TRUE;
 
+	acpi_gbl_permanent_mmap = 1;
+
+	status = acpi_reallocate_root_table();
+	if (ACPI_FAILURE(status)) {
+		printk(KERN_ERR PREFIX
+		       "Unable to reallocate ACPI tables\n");
+		goto error0;
+	}
+
 	status = acpi_initialize_subsystem();
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX
@@ -611,32 +618,25 @@ void __init acpi_early_init(void)
 		goto error0;
 	}
 
-	/*
-	 * Get a separate copy of the FADT for use by other drivers.
-	 */
-	status = acpi_get_table(ACPI_TABLE_ID_FADT, 1, &buffer);
-	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX "Unable to get the FADT\n");
-		goto error0;
-	}
 #ifdef CONFIG_X86
 	if (!acpi_ioapic) {
-		extern acpi_interrupt_flags acpi_sci_flags;
+		extern u8 acpi_sci_flags;
 
 		/* compatible (0) means level (3) */
-		if (acpi_sci_flags.trigger == 0)
-			acpi_sci_flags.trigger = 3;
-
+		if (!(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)) {
+			acpi_sci_flags &= ~ACPI_MADT_TRIGGER_MASK;
+			acpi_sci_flags |= ACPI_MADT_TRIGGER_LEVEL;
+		}
 		/* Set PIC-mode SCI trigger type */
-		acpi_pic_sci_set_trigger(acpi_fadt.sci_int,
-					 acpi_sci_flags.trigger);
+		acpi_pic_sci_set_trigger(acpi_gbl_FADT.sci_interrupt,
+					 (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
 	} else {
 		extern int acpi_sci_override_gsi;
 		/*
-		 * now that acpi_fadt is initialized,
+		 * now that acpi_gbl_FADT is initialized,
 		 * update it with result from INT_SRC_OVR parsing
 		 */
-		acpi_fadt.sci_int = acpi_sci_override_gsi;
+		acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi;
 	}
 #endif
 

drivers/acpi/button.c

@@ -75,7 +75,7 @@ static int acpi_button_state_open_fs(struct inode *inode, struct file *file);
 static struct acpi_driver acpi_button_driver = {
 	.name = ACPI_BUTTON_DRIVER_NAME,
 	.class = ACPI_BUTTON_CLASS,
-	.ids = "ACPI_FPB,ACPI_FSB,PNP0C0D,PNP0C0C,PNP0C0E",
+	.ids = "button_power,button_sleep,PNP0C0D,PNP0C0C,PNP0C0E",
 	.ops = {
 		.add = acpi_button_add,
 		.remove = acpi_button_remove,

drivers/acpi/container.c

@@ -167,7 +167,7 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context)
 			if (ACPI_FAILURE(status) || !device) {
 				result = container_device_add(&device, handle);
 				if (!result)
-					kobject_uevent(&device->kobj,
+					kobject_uevent(&device->dev.kobj,
 						       KOBJ_ONLINE);
 				else
 					printk("Failed to add container\n");
@@ -175,13 +175,13 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context)
 		} else {
 			if (ACPI_SUCCESS(status)) {
 				/* device exist and this is a remove request */
-				kobject_uevent(&device->kobj, KOBJ_OFFLINE);
+				kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
 			}
 		}
 		break;
 	case ACPI_NOTIFY_EJECT_REQUEST:
 		if (!acpi_bus_get_device(handle, &device) && device) {
-			kobject_uevent(&device->kobj, KOBJ_OFFLINE);
+			kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
 		}
 		break;
 	default:

drivers/acpi/debug.c

@@ -13,14 +13,11 @@
 
 #define _COMPONENT		ACPI_SYSTEM_COMPONENT
 ACPI_MODULE_NAME("debug")
-#define ACPI_SYSTEM_FILE_DEBUG_LAYER	"debug_layer"
-#define ACPI_SYSTEM_FILE_DEBUG_LEVEL	"debug_level"
+
 #ifdef MODULE_PARAM_PREFIX
 #undef MODULE_PARAM_PREFIX
 #endif
-#define MODULE_PARAM_PREFIX
-    module_param(acpi_dbg_layer, uint, 0400);
-module_param(acpi_dbg_level, uint, 0400);
+#define MODULE_PARAM_PREFIX "acpi."
 
 struct acpi_dlayer {
 	const char *name;
@@ -86,6 +83,60 @@ static const struct acpi_dlevel acpi_debug_levels[] = {
 	ACPI_DEBUG_INIT(ACPI_LV_EVENTS),
 };
 
+/* --------------------------------------------------------------------------
+                              FS Interface (/sys)
+   -------------------------------------------------------------------------- */
+static int param_get_debug_layer(char *buffer, struct kernel_param *kp) {
+	int result = 0;
+	int i;
+
+	result = sprintf(buffer, "%-25s\tHex        SET\n", "Description");
+
+	for(i = 0; i <ARRAY_SIZE(acpi_debug_layers); i++) {
+		result += sprintf(buffer+result, "%-25s\t0x%08lX [%c]\n",
+					acpi_debug_layers[i].name,
+					acpi_debug_layers[i].value,
+					(acpi_dbg_layer & acpi_debug_layers[i].value) ? '*' : ' ');
+	}
+	result += sprintf(buffer+result, "%-25s\t0x%08X [%c]\n", "ACPI_ALL_DRIVERS",
+					ACPI_ALL_DRIVERS,
+					(acpi_dbg_layer & ACPI_ALL_DRIVERS) ==
+					ACPI_ALL_DRIVERS ? '*' : (acpi_dbg_layer &
+					ACPI_ALL_DRIVERS) == 0 ? ' ' : '-');
+	result += sprintf(buffer+result, "--\ndebug_layer = 0x%08X ( * = enabled)\n", acpi_dbg_layer);
+
+	return result;
+}
+
+static int param_get_debug_level(char *buffer, struct kernel_param *kp) {
+	int result = 0;
+	int i;
+
+	result = sprintf(buffer, "%-25s\tHex        SET\n", "Description");
+
+	for (i = 0; i < ARRAY_SIZE(acpi_debug_levels); i++) {
+		result += sprintf(buffer+result, "%-25s\t0x%08lX [%c]\n",
+				     acpi_debug_levels[i].name,
+				     acpi_debug_levels[i].value,
+				     (acpi_dbg_level & acpi_debug_levels[i].
+				      value) ? '*' : ' ');
+	}
+	result += sprintf(buffer+result, "--\ndebug_level = 0x%08X (* = enabled)\n",
+			     acpi_dbg_level);
+
+	return result;
+}
+
+module_param_call(debug_layer, param_set_uint, param_get_debug_layer, &acpi_dbg_layer, 0644);
+module_param_call(debug_level, param_set_uint, param_get_debug_level, &acpi_dbg_level, 0644);
+
+/* --------------------------------------------------------------------------
+                              FS Interface (/proc)
+   -------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_PROCFS
+#define ACPI_SYSTEM_FILE_DEBUG_LAYER	"debug_layer"
+#define ACPI_SYSTEM_FILE_DEBUG_LEVEL		"debug_level"
+
 static int
 acpi_system_read_debug(char *page,
 		       char **start, off_t off, int count, int *eof, void *data)
@@ -221,3 +272,4 @@ static int __init acpi_debug_init(void)
 }
 
 subsys_initcall(acpi_debug_init);
+#endif

drivers/acpi/dispatcher/dsfield.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -133,7 +133,8 @@ acpi_ds_create_buffer_field(union acpi_parse_object *op,
 		}
 	}
 
-	/* We could put the returned object (Node) on the object stack for later,
+	/*
+	 * We could put the returned object (Node) on the object stack for later,
 	 * but for now, we will put it in the "op" object that the parser uses,
 	 * so we can get it again at the end of this scope
 	 */
@@ -514,8 +515,33 @@ acpi_ds_create_bank_field(union acpi_parse_object *op,
 
 	/* Third arg is the bank_value */
 
+	/* TBD: This arg is a term_arg, not a constant, and must be evaluated */
+
 	arg = arg->common.next;
-	info.bank_value = (u32) arg->common.value.integer;
+
+	/* Currently, only the following constants are supported */
+
+	switch (arg->common.aml_opcode) {
+	case AML_ZERO_OP:
+		info.bank_value = 0;
+		break;
+
+	case AML_ONE_OP:
+		info.bank_value = 1;
+		break;
+
+	case AML_BYTE_OP:
+	case AML_WORD_OP:
+	case AML_DWORD_OP:
+	case AML_QWORD_OP:
+		info.bank_value = (u32) arg->common.value.integer;
+		break;
+
+	default:
+		info.bank_value = 0;
+		ACPI_ERROR((AE_INFO,
+			    "Non-constant BankValue for BankField is not implemented"));
+	}
 
 	/* Fourth arg is the field flags */
 

drivers/acpi/dispatcher/dsinit.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -44,6 +44,7 @@
 #include <acpi/acpi.h>
 #include <acpi/acdispat.h>
 #include <acpi/acnamesp.h>
+#include <acpi/actables.h>
 
 #define _COMPONENT          ACPI_DISPATCHER
 ACPI_MODULE_NAME("dsinit")
@@ -90,7 +91,7 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 	 * We are only interested in NS nodes owned by the table that
 	 * was just loaded
 	 */
-	if (node->owner_id != info->table_desc->owner_id) {
+	if (node->owner_id != info->owner_id) {
 		return (AE_OK);
 	}
 
@@ -150,14 +151,21 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
  ******************************************************************************/
 
 acpi_status
-acpi_ds_initialize_objects(struct acpi_table_desc * table_desc,
+acpi_ds_initialize_objects(acpi_native_uint table_index,
 			   struct acpi_namespace_node * start_node)
 {
 	acpi_status status;
 	struct acpi_init_walk_info info;
+	struct acpi_table_header *table;
+	acpi_owner_id owner_id;
 
 	ACPI_FUNCTION_TRACE(ds_initialize_objects);
 
+	status = acpi_tb_get_owner_id(table_index, &owner_id);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 			  "**** Starting initialization of namespace objects ****\n"));
 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "Parsing all Control Methods:"));
@@ -166,7 +174,8 @@ acpi_ds_initialize_objects(struct acpi_table_desc * table_desc,
 	info.op_region_count = 0;
 	info.object_count = 0;
 	info.device_count = 0;
-	info.table_desc = table_desc;
+	info.table_index = table_index;
+	info.owner_id = owner_id;
 
 	/* Walk entire namespace from the supplied root */
 
@@ -176,10 +185,14 @@ acpi_ds_initialize_objects(struct acpi_table_desc * table_desc,
 		ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
 	}
 
+	status = acpi_get_table_by_index(table_index, &table);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
 			      "\nTable [%4.4s](id %4.4X) - %hd Objects with %hd Devices %hd Methods %hd Regions\n",
-			      table_desc->pointer->signature,
-			      table_desc->owner_id, info.object_count,
+			      table->signature, owner_id, info.object_count,
 			      info.device_count, info.method_count,
 			      info.op_region_count));
 

drivers/acpi/dispatcher/dsmethod.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -327,7 +327,7 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
 	ACPI_FUNCTION_TRACE_PTR(ds_call_control_method, this_walk_state);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-			  "Execute method %p, currentstate=%p\n",
+			  "Calling method %p, currentstate=%p\n",
 			  this_walk_state->prev_op, this_walk_state));
 
 	/*
@@ -351,49 +351,7 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
 		return_ACPI_STATUS(status);
 	}
 
-	/*
-	 * 1) Parse the method. All "normal" methods are parsed for each execution.
-	 * Internal methods (_OSI, etc.) do not require parsing.
-	 */
-	if (!(obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY)) {
-
-		/* Create a new walk state for the parse */
-
-		next_walk_state =
-		    acpi_ds_create_walk_state(obj_desc->method.owner_id, op,
-					      obj_desc, NULL);
-		if (!next_walk_state) {
-			status = AE_NO_MEMORY;
-			goto cleanup;
-		}
-
-		/* Create and init a parse tree root */
-
-		op = acpi_ps_create_scope_op();
-		if (!op) {
-			status = AE_NO_MEMORY;
-			goto cleanup;
-		}
-
-		status = acpi_ds_init_aml_walk(next_walk_state, op, method_node,
-					       obj_desc->method.aml_start,
-					       obj_desc->method.aml_length,
-					       NULL, 1);
-		if (ACPI_FAILURE(status)) {
-			acpi_ps_delete_parse_tree(op);
-			goto cleanup;
-		}
-
-		/* Begin AML parse (deletes next_walk_state) */
-
-		status = acpi_ps_parse_aml(next_walk_state);
-		acpi_ps_delete_parse_tree(op);
-		if (ACPI_FAILURE(status)) {
-			goto cleanup;
-		}
-	}
-
-	/* 2) Begin method execution. Create a new walk state */
+	/* Begin method parse/execution. Create a new walk state */
 
 	next_walk_state = acpi_ds_create_walk_state(obj_desc->method.owner_id,
 						    NULL, obj_desc, thread);
@@ -424,7 +382,8 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
 
 	status = acpi_ds_init_aml_walk(next_walk_state, NULL, method_node,
 				       obj_desc->method.aml_start,
-				       obj_desc->method.aml_length, info, 3);
+				       obj_desc->method.aml_length, info,
+				       ACPI_IMODE_EXECUTE);
 
 	ACPI_FREE(info);
 	if (ACPI_FAILURE(status)) {
@@ -445,8 +404,8 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
 	this_walk_state->num_operands = 0;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-			  "Starting nested execution, newstate=%p\n",
-			  next_walk_state));
+			  "**** Begin nested execution of [%4.4s] **** WalkState=%p\n",
+			  method_node->name.ascii, next_walk_state));
 
 	/* Invoke an internal method if necessary */
 

drivers/acpi/dispatcher/dsmthdat.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/dispatcher/dsobject.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -260,7 +260,7 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
 	}
 
 	obj_desc->buffer.flags |= AOPOBJ_DATA_VALID;
-	op->common.node = (struct acpi_namespace_node *)obj_desc;
+	op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
 	return_ACPI_STATUS(AE_OK);
 }
 
@@ -270,7 +270,8 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
  *
  * PARAMETERS:  walk_state      - Current walk state
  *              Op              - Parser object to be translated
- *              package_length  - Number of elements in the package
+ *              element_count   - Number of elements in the package - this is
+ *                                the num_elements argument to Package()
  *              obj_desc_ptr    - Where the ACPI internal object is returned
  *
  * RETURN:      Status
@@ -278,18 +279,29 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
  * DESCRIPTION: Translate a parser Op package object to the equivalent
  *              namespace object
  *
+ * NOTE: The number of elements in the package will be always be the num_elements
+ * count, regardless of the number of elements in the package list. If
+ * num_elements is smaller, only that many package list elements are used.
+ * if num_elements is larger, the Package object is padded out with
+ * objects of type Uninitialized (as per ACPI spec.)
+ *
+ * Even though the ASL compilers do not allow num_elements to be smaller
+ * than the Package list length (for the fixed length package opcode), some
+ * BIOS code modifies the AML on the fly to adjust the num_elements, and
+ * this code compensates for that. This also provides compatibility with
+ * other AML interpreters.
+ *
  ******************************************************************************/
 
 acpi_status
 acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 				   union acpi_parse_object *op,
-				   u32 package_length,
+				   u32 element_count,
 				   union acpi_operand_object **obj_desc_ptr)
 {
 	union acpi_parse_object *arg;
 	union acpi_parse_object *parent;
 	union acpi_operand_object *obj_desc = NULL;
-	u32 package_list_length;
 	acpi_status status = AE_OK;
 	acpi_native_uint i;
 
@@ -318,32 +330,13 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 		obj_desc->package.node = parent->common.node;
 	}
 
-	obj_desc->package.count = package_length;
-
-	/* Count the number of items in the package list */
-
-	arg = op->common.value.arg;
-	arg = arg->common.next;
-	for (package_list_length = 0; arg; package_list_length++) {
-		arg = arg->common.next;
-	}
-
-	/*
-	 * The package length (number of elements) will be the greater
-	 * of the specified length and the length of the initializer list
-	 */
-	if (package_list_length > package_length) {
-		obj_desc->package.count = package_list_length;
-	}
-
 	/*
-	 * Allocate the pointer array (array of pointers to the
-	 * individual objects). Add an extra pointer slot so
-	 * that the list is always null terminated.
+	 * Allocate the element array (array of pointers to the individual
+	 * objects) based on the num_elements parameter. Add an extra pointer slot
+	 * so that the list is always null terminated.
 	 */
 	obj_desc->package.elements = ACPI_ALLOCATE_ZEROED(((acpi_size)
-							   obj_desc->package.
-							   count +
+							   element_count +
 							   1) * sizeof(void *));
 
 	if (!obj_desc->package.elements) {
@@ -351,15 +344,20 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 		return_ACPI_STATUS(AE_NO_MEMORY);
 	}
 
+	obj_desc->package.count = element_count;
+
 	/*
-	 * Initialize all elements of the package
+	 * Initialize the elements of the package, up to the num_elements count.
+	 * Package is automatically padded with uninitialized (NULL) elements
+	 * if num_elements is greater than the package list length. Likewise,
+	 * Package is truncated if num_elements is less than the list length.
 	 */
 	arg = op->common.value.arg;
 	arg = arg->common.next;
-	for (i = 0; arg; i++) {
+	for (i = 0; arg && (i < element_count); i++) {
 		if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
 
-			/* Object (package or buffer) is already built */
+			/* This package element is already built, just get it */
 
 			obj_desc->package.elements[i] =
 			    ACPI_CAST_PTR(union acpi_operand_object,
@@ -373,8 +371,14 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 		arg = arg->common.next;
 	}
 
+	if (!arg) {
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Package List length larger than NumElements count (%X), truncated\n",
+				  element_count));
+	}
+
 	obj_desc->package.flags |= AOPOBJ_DATA_VALID;
-	op->common.node = (struct acpi_namespace_node *)obj_desc;
+	op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
 	return_ACPI_STATUS(status);
 }
 
@@ -488,8 +492,9 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 		/*
 		 * Defer evaluation of Buffer term_arg operand
 		 */
-		obj_desc->buffer.node = (struct acpi_namespace_node *)
-		    walk_state->operands[0];
+		obj_desc->buffer.node =
+		    ACPI_CAST_PTR(struct acpi_namespace_node,
+				  walk_state->operands[0]);
 		obj_desc->buffer.aml_start = op->named.data;
 		obj_desc->buffer.aml_length = op->named.length;
 		break;
@@ -499,8 +504,9 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 		/*
 		 * Defer evaluation of Package term_arg operand
 		 */
-		obj_desc->package.node = (struct acpi_namespace_node *)
-		    walk_state->operands[0];
+		obj_desc->package.node =
+		    ACPI_CAST_PTR(struct acpi_namespace_node,
+				  walk_state->operands[0]);
 		obj_desc->package.aml_start = op->named.data;
 		obj_desc->package.aml_length = op->named.length;
 		break;

drivers/acpi/dispatcher/dsopcode.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -114,7 +114,7 @@ acpi_ds_execute_arguments(struct acpi_namespace_node *node,
 	}
 
 	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
-				       aml_length, NULL, 1);
+				       aml_length, NULL, ACPI_IMODE_LOAD_PASS1);
 	if (ACPI_FAILURE(status)) {
 		acpi_ds_delete_walk_state(walk_state);
 		goto cleanup;
@@ -157,7 +157,7 @@ acpi_ds_execute_arguments(struct acpi_namespace_node *node,
 	/* Execute the opcode and arguments */
 
 	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
-				       aml_length, NULL, 3);
+				       aml_length, NULL, ACPI_IMODE_EXECUTE);
 	if (ACPI_FAILURE(status)) {
 		acpi_ds_delete_walk_state(walk_state);
 		goto cleanup;

drivers/acpi/dispatcher/dsutils.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/dispatcher/dswexec.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -219,7 +219,7 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state,
 	if (!op) {
 		status = acpi_ds_load2_begin_op(walk_state, out_op);
 		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
+			goto error_exit;
 		}
 
 		op = *out_op;
@@ -238,7 +238,7 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state,
 
 			status = acpi_ds_scope_stack_pop(walk_state);
 			if (ACPI_FAILURE(status)) {
-				return_ACPI_STATUS(status);
+				goto error_exit;
 			}
 		}
 	}
@@ -287,7 +287,7 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state,
 
 		status = acpi_ds_result_stack_push(walk_state);
 		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
+			goto error_exit;
 		}
 
 		status = acpi_ds_exec_begin_control_op(walk_state, op);
@@ -328,6 +328,10 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state,
 	/* Nothing to do here during method execution */
 
 	return_ACPI_STATUS(status);
+
+      error_exit:
+	status = acpi_ds_method_error(status, walk_state);
+	return_ACPI_STATUS(status);
 }
 
 /*****************************************************************************

drivers/acpi/dispatcher/dswload.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -196,6 +196,7 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
 		 * one of the opcodes that actually opens a scope
 		 */
 		switch (node->type) {
+		case ACPI_TYPE_ANY:
 		case ACPI_TYPE_LOCAL_SCOPE:	/* Scope  */
 		case ACPI_TYPE_DEVICE:
 		case ACPI_TYPE_POWER:
@@ -546,6 +547,7 @@ acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
 	acpi_status status;
 	acpi_object_type object_type;
 	char *buffer_ptr;
+	u32 flags;
 
 	ACPI_FUNCTION_TRACE(ds_load2_begin_op);
 
@@ -669,6 +671,7 @@ acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
 		 * one of the opcodes that actually opens a scope
 		 */
 		switch (node->type) {
+		case ACPI_TYPE_ANY:
 		case ACPI_TYPE_LOCAL_SCOPE:	/* Scope */
 		case ACPI_TYPE_DEVICE:
 		case ACPI_TYPE_POWER:
@@ -750,12 +753,20 @@ acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
 			break;
 		}
 
-		/* Add new entry into namespace */
+		flags = ACPI_NS_NO_UPSEARCH;
+		if (walk_state->pass_number == ACPI_IMODE_EXECUTE) {
+
+			/* Execution mode, node cannot already exist, node is temporary */
+
+			flags |= (ACPI_NS_ERROR_IF_FOUND | ACPI_NS_TEMPORARY);
+		}
+
+		/* Add new entry or lookup existing entry */
 
 		status =
 		    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
-				   object_type, ACPI_IMODE_LOAD_PASS2,
-				   ACPI_NS_NO_UPSEARCH, walk_state, &(node));
+				   object_type, ACPI_IMODE_LOAD_PASS2, flags,
+				   walk_state, &node);
 		break;
 	}
 

drivers/acpi/dispatcher/dswscope.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/dispatcher/dswstate.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/dock.c

@@ -615,20 +615,28 @@ static acpi_status
 find_dock_devices(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
 	acpi_status status;
-	acpi_handle tmp;
+	acpi_handle tmp, parent;
 	struct dock_station *ds = context;
 	struct dock_dependent_device *dd;
 
 	status = acpi_bus_get_ejd(handle, &tmp);
-	if (ACPI_FAILURE(status))
-		return AE_OK;
+	if (ACPI_FAILURE(status)) {
+		/* try the parent device as well */
+		status = acpi_get_parent(handle, &parent);
+		if (ACPI_FAILURE(status))
+			goto fdd_out;
+		/* see if parent is dependent on dock */
+		status = acpi_bus_get_ejd(parent, &tmp);
+		if (ACPI_FAILURE(status))
+			goto fdd_out;
+	}
 
 	if (tmp == ds->handle) {
 		dd = alloc_dock_dependent_device(handle);
 		if (dd)
 			add_dock_dependent_device(ds, dd);
 	}
-
+fdd_out:
 	return AE_OK;
 }
 

drivers/acpi/ec.c

@@ -872,9 +872,8 @@ static int __init acpi_ec_get_real_ecdt(void)
 	acpi_status status;
 	struct acpi_table_ecdt *ecdt_ptr;
 
-	status = acpi_get_firmware_table("ECDT", 1, ACPI_LOGICAL_ADDRESSING,
-					 (struct acpi_table_header **)
-					 &ecdt_ptr);
+	status = acpi_get_table(ACPI_SIG_ECDT, 1,
+				(struct acpi_table_header **)&ecdt_ptr);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
@@ -891,14 +890,14 @@ static int __init acpi_ec_get_real_ecdt(void)
 	if (acpi_ec_mode == EC_INTR) {
 		init_waitqueue_head(&ec_ecdt->wait);
 	}
-	ec_ecdt->command_addr = ecdt_ptr->ec_control.address;
-	ec_ecdt->data_addr = ecdt_ptr->ec_data.address;
-	ec_ecdt->gpe = ecdt_ptr->gpe_bit;
+	ec_ecdt->command_addr = ecdt_ptr->control.address;
+	ec_ecdt->data_addr = ecdt_ptr->data.address;
+	ec_ecdt->gpe = ecdt_ptr->gpe;
 	/* use the GL just to be safe */
 	ec_ecdt->global_lock = TRUE;
 	ec_ecdt->uid = ecdt_ptr->uid;
 
-	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->handle);
+	status = acpi_get_handle(NULL, ecdt_ptr->id, &ec_ecdt->handle);
 	if (ACPI_FAILURE(status)) {
 		goto error;
 	}

drivers/acpi/events/evevent.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -70,13 +70,6 @@ acpi_status acpi_ev_initialize_events(void)
 
 	ACPI_FUNCTION_TRACE(ev_initialize_events);
 
-	/* Make sure we have ACPI tables */
-
-	if (!acpi_gbl_DSDT) {
-		ACPI_WARNING((AE_INFO, "No ACPI tables present!"));
-		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
-	}
-
 	/*
 	 * Initialize the Fixed and General Purpose Events. This is done prior to
 	 * enabling SCIs to prevent interrupts from occurring before the handlers are
@@ -211,8 +204,7 @@ static acpi_status acpi_ev_fixed_event_initialize(void)
 		if (acpi_gbl_fixed_event_info[i].enable_register_id != 0xFF) {
 			status =
 			    acpi_set_register(acpi_gbl_fixed_event_info[i].
-					      enable_register_id, 0,
-					      ACPI_MTX_LOCK);
+					      enable_register_id, 0);
 			if (ACPI_FAILURE(status)) {
 				return (status);
 			}
@@ -298,7 +290,7 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event)
 	/* Clear the status bit */
 
 	(void)acpi_set_register(acpi_gbl_fixed_event_info[event].
-				status_register_id, 1, ACPI_MTX_DO_NOT_LOCK);
+				status_register_id, 1);
 
 	/*
 	 * Make sure we've got a handler.  If not, report an error.
@@ -306,8 +298,7 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event)
 	 */
 	if (NULL == acpi_gbl_fixed_event_handlers[event].handler) {
 		(void)acpi_set_register(acpi_gbl_fixed_event_info[event].
-					enable_register_id, 0,
-					ACPI_MTX_DO_NOT_LOCK);
+					enable_register_id, 0);
 
 		ACPI_ERROR((AE_INFO,
 			    "No installed handler for fixed event [%08X]",

drivers/acpi/events/evgpe.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -121,7 +121,9 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
 	if (!gpe_register_info) {
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
-	register_bit = gpe_event_info->register_bit;
+	register_bit = (u8)
+	    (1 <<
+	     (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
 
 	/* 1) Disable case.  Simply clear all enable bits */
 
@@ -458,8 +460,7 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
 
 				/* Examine one GPE bit */
 
-				if (enabled_status_byte &
-				    acpi_gbl_decode_to8bit[j]) {
+				if (enabled_status_byte & (1 << j)) {
 					/*
 					 * Found an active GPE. Dispatch the event to a handler
 					 * or method.
@@ -570,7 +571,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
 
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
-					"While evaluating GPE method [%4.4s]",
+					"while evaluating GPE method [%4.4s]",
 					acpi_ut_get_node_name
 					(local_gpe_event_info.dispatch.
 					 method_node)));
@@ -618,6 +619,8 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 
 	ACPI_FUNCTION_TRACE(ev_gpe_dispatch);
 
+	acpi_gpe_count++;
+
 	/*
 	 * If edge-triggered, clear the GPE status bit now.  Note that
 	 * level-triggered events are cleared after the GPE is serviced.
@@ -633,20 +636,23 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		}
 	}
 
-	/* Save current system state */
-
-	if (acpi_gbl_system_awake_and_running) {
-		ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
-	} else {
-		ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
+	if (!acpi_gbl_system_awake_and_running) {
+		/*
+		 * We just woke up because of a wake GPE. Disable any further GPEs
+		 * until we are fully up and running (Only wake GPEs should be enabled
+		 * at this time, but we just brute-force disable them all.)
+		 * 1) We must disable this particular wake GPE so it won't fire again
+		 * 2) We want to disable all wake GPEs, since we are now awake
+		 */
+		(void)acpi_hw_disable_all_gpes();
 	}
 
 	/*
-	 * Dispatch the GPE to either an installed handler, or the control
-	 * method associated with this GPE (_Lxx or _Exx).
-	 * If a handler exists, we invoke it and do not attempt to run the method.
-	 * If there is neither a handler nor a method, we disable the level to
-	 * prevent further events from coming in here.
+	 * Dispatch the GPE to either an installed handler, or the control method
+	 * associated with this GPE (_Lxx or _Exx). If a handler exists, we invoke
+	 * it and do not attempt to run the method. If there is neither a handler
+	 * nor a method, we disable this GPE to prevent further such pointless
+	 * events from firing.
 	 */
 	switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
 	case ACPI_GPE_DISPATCH_HANDLER:
@@ -677,8 +683,8 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 	case ACPI_GPE_DISPATCH_METHOD:
 
 		/*
-		 * Disable GPE, so it doesn't keep firing before the method has a
-		 * chance to run.
+		 * Disable the GPE, so it doesn't keep firing before the method has a
+		 * chance to run (it runs asynchronously with interrupts enabled).
 		 */
 		status = acpi_ev_disable_gpe(gpe_event_info);
 		if (ACPI_FAILURE(status)) {
@@ -711,7 +717,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 			    gpe_number));
 
 		/*
-		 * Disable the GPE.  The GPE will remain disabled until the ACPI
+		 * Disable the GPE. The GPE will remain disabled until the ACPI
 		 * Core Subsystem is restarted, or a handler is installed.
 		 */
 		status = acpi_ev_disable_gpe(gpe_event_info);
@@ -726,50 +732,3 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 
 	return_UINT32(ACPI_INTERRUPT_HANDLED);
 }
-
-#ifdef ACPI_GPE_NOTIFY_CHECK
-/*******************************************************************************
- * TBD: NOT USED, PROTOTYPE ONLY AND WILL PROBABLY BE REMOVED
- *
- * FUNCTION:    acpi_ev_check_for_wake_only_gpe
- *
- * PARAMETERS:  gpe_event_info  - info for this GPE
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Determine if a a GPE is "wake-only".
- *
- *              Called from Notify() code in interpreter when a "DeviceWake"
- *              Notify comes in.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ev_check_for_wake_only_gpe);
-
-	if ((gpe_event_info) &&	/* Only >0 for _Lxx/_Exx */
-	    ((gpe_event_info->flags & ACPI_GPE_SYSTEM_MASK) == ACPI_GPE_SYSTEM_RUNNING)) {	/* System state at GPE time */
-		/* This must be a wake-only GPE, disable it */
-
-		status = acpi_ev_disable_gpe(gpe_event_info);
-
-		/* Set GPE to wake-only.  Do not change wake disabled/enabled status */
-
-		acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
-
-		ACPI_INFO((AE_INFO,
-			   "GPE %p was updated from wake/run to wake-only",
-			   gpe_event_info));
-
-		/* This was a wake-only GPE */
-
-		return_ACPI_STATUS(AE_WAKE_ONLY_GPE);
-	}
-
-	return_ACPI_STATUS(AE_OK);
-}
-#endif

drivers/acpi/events/evgpeblk.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -529,7 +529,7 @@ static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
 
 	/* Install new interrupt handler if not SCI_INT */
 
-	if (interrupt_number != acpi_gbl_FADT->sci_int) {
+	if (interrupt_number != acpi_gbl_FADT.sci_interrupt) {
 		status = acpi_os_install_interrupt_handler(interrupt_number,
 							   acpi_ev_gpe_xrupt_handler,
 							   gpe_xrupt);
@@ -567,7 +567,7 @@ acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
 
 	/* We never want to remove the SCI interrupt handler */
 
-	if (gpe_xrupt->interrupt_number == acpi_gbl_FADT->sci_int) {
+	if (gpe_xrupt->interrupt_number == acpi_gbl_FADT.sci_interrupt) {
 		gpe_xrupt->gpe_block_list_head = NULL;
 		return_ACPI_STATUS(AE_OK);
 	}
@@ -796,30 +796,31 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
 		    (u8) (gpe_block->block_base_number +
 			  (i * ACPI_GPE_REGISTER_WIDTH));
 
-		ACPI_STORE_ADDRESS(this_register->status_address.address,
-				   (gpe_block->block_address.address + i));
+		this_register->status_address.address =
+		    gpe_block->block_address.address + i;
 
-		ACPI_STORE_ADDRESS(this_register->enable_address.address,
-				   (gpe_block->block_address.address
-				    + i + gpe_block->register_count));
+		this_register->enable_address.address =
+		    gpe_block->block_address.address + i +
+		    gpe_block->register_count;
 
-		this_register->status_address.address_space_id =
-		    gpe_block->block_address.address_space_id;
-		this_register->enable_address.address_space_id =
-		    gpe_block->block_address.address_space_id;
-		this_register->status_address.register_bit_width =
+		this_register->status_address.space_id =
+		    gpe_block->block_address.space_id;
+		this_register->enable_address.space_id =
+		    gpe_block->block_address.space_id;
+		this_register->status_address.bit_width =
 		    ACPI_GPE_REGISTER_WIDTH;
-		this_register->enable_address.register_bit_width =
+		this_register->enable_address.bit_width =
 		    ACPI_GPE_REGISTER_WIDTH;
-		this_register->status_address.register_bit_offset =
+		this_register->status_address.bit_offset =
 		    ACPI_GPE_REGISTER_WIDTH;
-		this_register->enable_address.register_bit_offset =
+		this_register->enable_address.bit_offset =
 		    ACPI_GPE_REGISTER_WIDTH;
 
 		/* Init the event_info for each GPE within this register */
 
 		for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
-			this_event->register_bit = acpi_gbl_decode_to8bit[j];
+			this_event->gpe_number =
+			    (u8) (this_register->base_gpe_number + j);
 			this_event->register_info = this_register;
 			this_event++;
 		}
@@ -1109,11 +1110,12 @@ acpi_status acpi_ev_gpe_initialize(void)
 	 * If EITHER the register length OR the block address are zero, then that
 	 * particular block is not supported.
 	 */
-	if (acpi_gbl_FADT->gpe0_blk_len && acpi_gbl_FADT->xgpe0_blk.address) {
+	if (acpi_gbl_FADT.gpe0_block_length &&
+	    acpi_gbl_FADT.xgpe0_block.address) {
 
 		/* GPE block 0 exists (has both length and address > 0) */
 
-		register_count0 = (u16) (acpi_gbl_FADT->gpe0_blk_len / 2);
+		register_count0 = (u16) (acpi_gbl_FADT.gpe0_block_length / 2);
 
 		gpe_number_max =
 		    (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
@@ -1121,9 +1123,9 @@ acpi_status acpi_ev_gpe_initialize(void)
 		/* Install GPE Block 0 */
 
 		status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
-						  &acpi_gbl_FADT->xgpe0_blk,
+						  &acpi_gbl_FADT.xgpe0_block,
 						  register_count0, 0,
-						  acpi_gbl_FADT->sci_int,
+						  acpi_gbl_FADT.sci_interrupt,
 						  &acpi_gbl_gpe_fadt_blocks[0]);
 
 		if (ACPI_FAILURE(status)) {
@@ -1132,20 +1134,21 @@ acpi_status acpi_ev_gpe_initialize(void)
 		}
 	}
 
-	if (acpi_gbl_FADT->gpe1_blk_len && acpi_gbl_FADT->xgpe1_blk.address) {
+	if (acpi_gbl_FADT.gpe1_block_length &&
+	    acpi_gbl_FADT.xgpe1_block.address) {
 
 		/* GPE block 1 exists (has both length and address > 0) */
 
-		register_count1 = (u16) (acpi_gbl_FADT->gpe1_blk_len / 2);
+		register_count1 = (u16) (acpi_gbl_FADT.gpe1_block_length / 2);
 
 		/* Check for GPE0/GPE1 overlap (if both banks exist) */
 
 		if ((register_count0) &&
-		    (gpe_number_max >= acpi_gbl_FADT->gpe1_base)) {
+		    (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
 			ACPI_ERROR((AE_INFO,
 				    "GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1",
-				    gpe_number_max, acpi_gbl_FADT->gpe1_base,
-				    acpi_gbl_FADT->gpe1_base +
+				    gpe_number_max, acpi_gbl_FADT.gpe1_base,
+				    acpi_gbl_FADT.gpe1_base +
 				    ((register_count1 *
 				      ACPI_GPE_REGISTER_WIDTH) - 1)));
 
@@ -1157,10 +1160,11 @@ acpi_status acpi_ev_gpe_initialize(void)
 
 			status =
 			    acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
-						     &acpi_gbl_FADT->xgpe1_blk,
+						     &acpi_gbl_FADT.xgpe1_block,
 						     register_count1,
-						     acpi_gbl_FADT->gpe1_base,
-						     acpi_gbl_FADT->sci_int,
+						     acpi_gbl_FADT.gpe1_base,
+						     acpi_gbl_FADT.
+						     sci_interrupt,
 						     &acpi_gbl_gpe_fadt_blocks
 						     [1]);
 
@@ -1173,7 +1177,7 @@ acpi_status acpi_ev_gpe_initialize(void)
 			 * GPE0 and GPE1 do not have to be contiguous in the GPE number
 			 * space. However, GPE0 always starts at GPE number zero.
 			 */
-			gpe_number_max = acpi_gbl_FADT->gpe1_base +
+			gpe_number_max = acpi_gbl_FADT.gpe1_base +
 			    ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
 		}
 	}

drivers/acpi/events/evregion.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -291,7 +291,6 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 			       u32 bit_width, acpi_integer * value)
 {
 	acpi_status status;
-	acpi_status status2;
 	acpi_adr_space_handler handler;
 	acpi_adr_space_setup region_setup;
 	union acpi_operand_object *handler_desc;
@@ -345,7 +344,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		 * setup will potentially execute control methods
 		 * (e.g., _REG method for this region)
 		 */
-		acpi_ex_exit_interpreter();
+		acpi_ex_relinquish_interpreter();
 
 		status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
 				      handler_desc->address_space.context,
@@ -353,10 +352,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 
 		/* Re-enter the interpreter */
 
-		status2 = acpi_ex_enter_interpreter();
-		if (ACPI_FAILURE(status2)) {
-			return_ACPI_STATUS(status2);
-		}
+		acpi_ex_reacquire_interpreter();
 
 		/* Check for failure of the Region Setup */
 
@@ -409,7 +405,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		 * exit the interpreter because the handler *might* block -- we don't
 		 * know what it will do, so we can't hold the lock on the intepreter.
 		 */
-		acpi_ex_exit_interpreter();
+		acpi_ex_relinquish_interpreter();
 	}
 
 	/* Call the handler */
@@ -430,10 +426,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		 * We just returned from a non-default handler, we must re-enter the
 		 * interpreter
 		 */
-		status2 = acpi_ex_enter_interpreter();
-		if (ACPI_FAILURE(status2)) {
-			return_ACPI_STATUS(status2);
-		}
+		acpi_ex_reacquire_interpreter();
 	}
 
 	return_ACPI_STATUS(status);

drivers/acpi/events/evrgnini.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -48,6 +48,11 @@
 #define _COMPONENT          ACPI_EVENTS
 ACPI_MODULE_NAME("evrgnini")
 
+/* Local prototypes */
+static u8 acpi_ev_match_pci_root_bridge(char *id);
+
+static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ev_system_memory_region_setup
@@ -62,6 +67,7 @@ ACPI_MODULE_NAME("evrgnini")
  * DESCRIPTION: Setup a system_memory operation region
  *
  ******************************************************************************/
+
 acpi_status
 acpi_ev_system_memory_region_setup(acpi_handle handle,
 				   u32 function,
@@ -168,9 +174,9 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 	union acpi_operand_object *handler_obj;
 	struct acpi_namespace_node *parent_node;
 	struct acpi_namespace_node *pci_root_node;
+	struct acpi_namespace_node *pci_device_node;
 	union acpi_operand_object *region_obj =
 	    (union acpi_operand_object *)handle;
-	struct acpi_device_id object_hID;
 
 	ACPI_FUNCTION_TRACE(ev_pci_config_region_setup);
 
@@ -215,45 +221,30 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 
 		pci_root_node = parent_node;
 		while (pci_root_node != acpi_gbl_root_node) {
-			status =
-			    acpi_ut_execute_HID(pci_root_node, &object_hID);
-			if (ACPI_SUCCESS(status)) {
-				/*
-				 * Got a valid _HID string, check if this is a PCI root.
-				 * New for ACPI 3.0: check for a PCI Express root also.
-				 */
-				if (!
-				    (ACPI_STRNCMP
-				     (object_hID.value, PCI_ROOT_HID_STRING,
-				      sizeof(PCI_ROOT_HID_STRING)))
-				    ||
-				    !(ACPI_STRNCMP
-				      (object_hID.value,
-				       PCI_EXPRESS_ROOT_HID_STRING,
-				       sizeof(PCI_EXPRESS_ROOT_HID_STRING)))) {
-
-					/* Install a handler for this PCI root bridge */
 
-					status =
-					    acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
-					if (ACPI_FAILURE(status)) {
-						if (status == AE_SAME_HANDLER) {
-							/*
-							 * It is OK if the handler is already installed on the root
-							 * bridge.  Still need to return a context object for the
-							 * new PCI_Config operation region, however.
-							 */
-							status = AE_OK;
-						} else {
-							ACPI_EXCEPTION((AE_INFO,
-									status,
-									"Could not install PciConfig handler for Root Bridge %4.4s",
-									acpi_ut_get_node_name
-									(pci_root_node)));
-						}
+			/* Get the _HID/_CID in order to detect a root_bridge */
+
+			if (acpi_ev_is_pci_root_bridge(pci_root_node)) {
+
+				/* Install a handler for this PCI root bridge */
+
+				status = acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
+				if (ACPI_FAILURE(status)) {
+					if (status == AE_SAME_HANDLER) {
+						/*
+						 * It is OK if the handler is already installed on the root
+						 * bridge.  Still need to return a context object for the
+						 * new PCI_Config operation region, however.
+						 */
+						status = AE_OK;
+					} else {
+						ACPI_EXCEPTION((AE_INFO, status,
+								"Could not install PciConfig handler for Root Bridge %4.4s",
+								acpi_ut_get_node_name
+								(pci_root_node)));
 					}
-					break;
 				}
+				break;
 			}
 
 			pci_root_node = acpi_ns_get_parent_node(pci_root_node);
@@ -282,14 +273,25 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 	/*
 	 * For PCI_Config space access, we need the segment, bus,
 	 * device and function numbers.  Acquire them here.
+	 *
+	 * Find the parent device object. (This allows the operation region to be
+	 * within a subscope under the device, such as a control method.)
 	 */
+	pci_device_node = region_obj->region.node;
+	while (pci_device_node && (pci_device_node->type != ACPI_TYPE_DEVICE)) {
+		pci_device_node = acpi_ns_get_parent_node(pci_device_node);
+	}
+
+	if (!pci_device_node) {
+		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+	}
 
 	/*
 	 * Get the PCI device and function numbers from the _ADR object
 	 * contained in the parent's scope.
 	 */
 	status =
-	    acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, parent_node,
+	    acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, pci_device_node,
 					    &pci_value);
 
 	/*
@@ -327,6 +329,91 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 	return_ACPI_STATUS(AE_OK);
 }
 
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_match_pci_root_bridge
+ *
+ * PARAMETERS:  Id              - The HID/CID in string format
+ *
+ * RETURN:      TRUE if the Id is a match for a PCI/PCI-Express Root Bridge
+ *
+ * DESCRIPTION: Determine if the input ID is a PCI Root Bridge ID.
+ *
+ ******************************************************************************/
+
+static u8 acpi_ev_match_pci_root_bridge(char *id)
+{
+
+	/*
+	 * Check if this is a PCI root.
+	 * ACPI 3.0+: check for a PCI Express root also.
+	 */
+	if (!(ACPI_STRNCMP(id,
+			   PCI_ROOT_HID_STRING,
+			   sizeof(PCI_ROOT_HID_STRING))) ||
+	    !(ACPI_STRNCMP(id,
+			   PCI_EXPRESS_ROOT_HID_STRING,
+			   sizeof(PCI_EXPRESS_ROOT_HID_STRING)))) {
+		return (TRUE);
+	}
+
+	return (FALSE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_is_pci_root_bridge
+ *
+ * PARAMETERS:  Node            - Device node being examined
+ *
+ * RETURN:      TRUE if device is a PCI/PCI-Express Root Bridge
+ *
+ * DESCRIPTION: Determine if the input device represents a PCI Root Bridge by
+ *              examining the _HID and _CID for the device.
+ *
+ ******************************************************************************/
+
+static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
+{
+	acpi_status status;
+	struct acpi_device_id hid;
+	struct acpi_compatible_id_list *cid;
+	acpi_native_uint i;
+
+	/*
+	 * Get the _HID and check for a PCI Root Bridge
+	 */
+	status = acpi_ut_execute_HID(node, &hid);
+	if (ACPI_FAILURE(status)) {
+		return (FALSE);
+	}
+
+	if (acpi_ev_match_pci_root_bridge(hid.value)) {
+		return (TRUE);
+	}
+
+	/*
+	 * The _HID did not match.
+	 * Get the _CID and check for a PCI Root Bridge
+	 */
+	status = acpi_ut_execute_CID(node, &cid);
+	if (ACPI_FAILURE(status)) {
+		return (FALSE);
+	}
+
+	/* Check all _CIDs in the returned list */
+
+	for (i = 0; i < cid->count; i++) {
+		if (acpi_ev_match_pci_root_bridge(cid->id[i].value)) {
+			ACPI_FREE(cid);
+			return (TRUE);
+		}
+	}
+
+	ACPI_FREE(cid);
+	return (FALSE);
+}
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ev_pci_bar_region_setup
@@ -432,6 +519,9 @@ acpi_ev_default_region_setup(acpi_handle handle,
  *              a PCI address in the scope of the definition.  This address is
  *              required to perform an access to PCI config space.
  *
+ * MUTEX:       Interpreter should be unlocked, because we may run the _REG
+ *              method for this region.
+ *
  ******************************************************************************/
 
 acpi_status

drivers/acpi/events/evsci.c

@@ -6,7 +6,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -142,9 +142,10 @@ u32 acpi_ev_install_sci_handler(void)
 
 	ACPI_FUNCTION_TRACE(ev_install_sci_handler);
 
-	status = acpi_os_install_interrupt_handler((u32) acpi_gbl_FADT->sci_int,
-						   acpi_ev_sci_xrupt_handler,
-						   acpi_gbl_gpe_xrupt_list_head);
+	status =
+	    acpi_os_install_interrupt_handler((u32) acpi_gbl_FADT.sci_interrupt,
+					      acpi_ev_sci_xrupt_handler,
+					      acpi_gbl_gpe_xrupt_list_head);
 	return_ACPI_STATUS(status);
 }
 
@@ -175,8 +176,9 @@ acpi_status acpi_ev_remove_sci_handler(void)
 
 	/* Just let the OS remove the handler and disable the level */
 
-	status = acpi_os_remove_interrupt_handler((u32) acpi_gbl_FADT->sci_int,
-						  acpi_ev_sci_xrupt_handler);
+	status =
+	    acpi_os_remove_interrupt_handler((u32) acpi_gbl_FADT.sci_interrupt,
+					     acpi_ev_sci_xrupt_handler);
 
 	return_ACPI_STATUS(status);
 }

drivers/acpi/events/evxface.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -768,11 +768,9 @@ acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle)
 		return (AE_BAD_PARAMETER);
 	}
 
-	status = acpi_ex_enter_interpreter();
-	if (ACPI_FAILURE(status)) {
-		return (status);
-	}
+	/* Must lock interpreter to prevent race conditions */
 
+	acpi_ex_enter_interpreter();
 	status = acpi_ev_acquire_global_lock(timeout);
 	acpi_ex_exit_interpreter();
 

drivers/acpi/events/evxfregn.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/executer/exconvrt.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without