[ARM] 4325/1: S3C24XX: remove s3c24xx_board

Remove the use of struct s3c24xx_board as
this is just as easily done by using the
platform device registration functions to
make the initialisation sequence easier.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-s3c2410/mach-amlm5900.c

@@ -160,17 +160,11 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 #endif
 };
 
-static struct s3c24xx_board amlm5900_board __initdata = {
-	.devices       = amlm5900_devices,
-	.devices_count = ARRAY_SIZE(amlm5900_devices)
-};
-
 void __init amlm5900_map_io(void)
 {
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
-	s3c24xx_set_board(&amlm5900_board);
 }
 
 #ifdef CONFIG_FB_S3C2410
@@ -247,6 +241,7 @@ static void __init amlm5900_init(void)
 #ifdef CONFIG_FB_S3C2410
 	s3c24xx_fb_set_platdata(&amlm5900_lcd_info);
 #endif
+	platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
 }
 
 MACHINE_START(AML_M5900, "AML_M5900")

arch/arm/mach-s3c2410/mach-bast.c

@@ -464,11 +464,6 @@ static struct clk *bast_clocks[] = {
 	&s3c24xx_uclk,
 };
 
-static struct s3c24xx_board bast_board __initdata = {
-	.devices       = bast_devices,
-	.devices_count = ARRAY_SIZE(bast_devices),
-};
-
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -492,13 +487,14 @@ static void __init bast_map_io(void)
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-	s3c24xx_set_board(&bast_board);
+
 	usb_simtec_init();
 }
 
 static void __init bast_init(void)
 {
 	s3c24xx_fb_set_platdata(&bast_lcd_info);
+	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 }
 
 MACHINE_START(BAST, "Simtec-BAST")

arch/arm/mach-s3c2410/mach-h1940.c

@@ -129,7 +129,6 @@ static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
 };
 
 
-
 /**
  * Set lcd on or off
  **/
@@ -188,17 +187,11 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_leds,
 };
 
-static struct s3c24xx_board h1940_board __initdata = {
-	.devices       = h1940_devices,
-	.devices_count = ARRAY_SIZE(h1940_devices)
-};
-
 static void __init h1940_map_io(void)
 {
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
-	s3c24xx_set_board(&h1940_board);
 
 	/* setup PM */
 
@@ -232,6 +225,8 @@ static void __init h1940_init(void)
 	      | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
 	      | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
+
+	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")

arch/arm/mach-s3c2410/mach-n30.c

@@ -90,17 +90,11 @@ static struct s3c2410_platform_i2c n30_i2ccfg = {
 	.max_freq	= 10*1000,
 };
 
-static struct s3c24xx_board n30_board __initdata = {
-	.devices       = n30_devices,
-	.devices_count = ARRAY_SIZE(n30_devices)
-};
-
 static void __init n30_map_io(void)
 {
 	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
-	s3c24xx_set_board(&n30_board);
 }
 
 static void __init n30_init_irq(void)
@@ -120,6 +114,8 @@ static void __init n30_init(void)
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
 }
 
 MACHINE_START(N30, "Acer-N30")

arch/arm/mach-s3c2410/mach-otom.c

@@ -100,20 +100,17 @@ static struct platform_device *otom11_devices[] __initdata = {
 	&otom_device_nor,
 };
 
-static struct s3c24xx_board otom11_board __initdata = {
-	.devices       = otom11_devices,
-	.devices_count = ARRAY_SIZE(otom11_devices)
-};
-
-
 static void __init otom11_map_io(void)
 {
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
-	s3c24xx_set_board(&otom11_board);
 }
 
+static void __init otom11_init(void)
+{
+	platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
+}
 
 MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
@@ -121,6 +118,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= otom11_map_io,
+	.init_machine	= otom11_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2410/mach-qt2410.c

@@ -331,11 +331,6 @@ static struct platform_device *qt2410_devices[] __initdata = {
 	&qt2410_led,
 };
 
-static struct s3c24xx_board qt2410_board __initdata = {
-	.devices       = qt2410_devices,
-	.devices_count = ARRAY_SIZE(qt2410_devices)
-};
-
 static struct mtd_partition qt2410_nand_part[] = {
 	[0] = {
 		.name	= "U-Boot",
@@ -405,7 +400,6 @@ static void __init qt2410_map_io(void)
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
 	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-	s3c24xx_set_board(&qt2410_board);
 }
 
 static void __init qt2410_machine_init(void)
@@ -432,6 +426,7 @@ static void __init qt2410_machine_init(void)
 
 	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
 
+	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c2410_pm_init();
 }
 

arch/arm/mach-s3c2410/mach-smdk2410.c

@@ -94,17 +94,17 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 	&s3c_device_iis,
 };
 
-static struct s3c24xx_board smdk2410_board __initdata = {
-	.devices       = smdk2410_devices,
-	.devices_count = ARRAY_SIZE(smdk2410_devices)
-};
-
 static void __init smdk2410_map_io(void)
 {
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-	s3c24xx_set_board(&smdk2410_board);
+}
+
+static void __init smdk2410_init(void)
+{
+	platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
+	smdk_machine_init();
 }
 
 MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
@@ -115,7 +115,7 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= smdk_machine_init,
+	.init_machine	= smdk2410_init,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
 

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -384,11 +384,6 @@ static struct clk *vr1000_clocks[] = {
 	&s3c24xx_uclk,
 };
 
-static struct s3c24xx_board vr1000_board __initdata = {
-	.devices       = vr1000_devices,
-	.devices_count = ARRAY_SIZE(vr1000_devices),
-};
-
 static void vr1000_power_off(void)
 {
 	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
@@ -417,10 +412,12 @@ static void __init vr1000_map_io(void)
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
-	s3c24xx_set_board(&vr1000_board);
-	usb_simtec_init();
 }
 
+static void __init vr1000_init(void)
+{
+	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
+}
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
@@ -428,6 +425,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= vr1000_map_io,
+	.init_machine	= vr1000_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2412/mach-smdk2413.c

@@ -110,11 +110,6 @@ static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_usbgadget,
 };
 
-static struct s3c24xx_board smdk2413_board __initdata = {
-	.devices       = smdk2413_devices,
-	.devices_count = ARRAY_SIZE(smdk2413_devices)
-};
-
 static void __init smdk2413_fixup(struct machine_desc *desc,
 				  struct tag *tags, char **cmdline,
 				  struct meminfo *mi)
@@ -132,7 +127,6 @@ static void __init smdk2413_map_io(void)
 	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
-	s3c24xx_set_board(&smdk2413_board);
 }
 
 static void __init smdk2413_machine_init(void)
@@ -149,6 +143,7 @@ static void __init smdk2413_machine_init(void)
 
  	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
 
+	platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
 	smdk_machine_init();
 }
 

arch/arm/mach-s3c2412/mach-vstms.c

@@ -129,11 +129,6 @@ static struct platform_device *vstms_devices[] __initdata = {
 	&s3c_device_nand,
 };
 
-static struct s3c24xx_board vstms_board __initdata = {
-	.devices       = vstms_devices,
-	.devices_count = ARRAY_SIZE(vstms_devices)
-};
-
 static void __init vstms_fixup(struct machine_desc *desc,
 				  struct tag *tags, char **cmdline,
 				  struct meminfo *mi)
@@ -153,7 +148,11 @@ static void __init vstms_map_io(void)
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
-	s3c24xx_set_board(&vstms_board);
+}
+
+static void __init vstms_init(void)
+{
+	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 
 MACHINE_START(VSTMS, "VSTMS")
@@ -163,6 +162,7 @@ MACHINE_START(VSTMS, "VSTMS")
 
 	.fixup		= vstms_fixup,
 	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2440/mach-anubis.c

@@ -281,11 +281,6 @@ static struct clk *anubis_clocks[] = {
 	&s3c24xx_uclk,
 };
 
-static struct s3c24xx_board anubis_board __initdata = {
-	.devices       = anubis_devices,
-	.devices_count = ARRAY_SIZE(anubis_devices),
-};
-
 static void __init anubis_map_io(void)
 {
 	/* initialise the clocks */
@@ -308,18 +303,24 @@ static void __init anubis_map_io(void)
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-	s3c24xx_set_board(&anubis_board);
 
 	/* ensure that the GPIO is setup */
 	s3c2410_gpio_setpin(S3C2410_GPA0, 1);
 }
 
+static void __init anubis_init(void)
+{
+	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+}
+
+
 MACHINE_START(ANUBIS, "Simtec-Anubis")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= anubis_map_io,
+	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2440/mach-nexcoder.c

@@ -116,12 +116,6 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 	&nexcoder_device_nor,
 };
 
-static struct s3c24xx_board nexcoder_board __initdata = {
-	.devices       = nexcoder_devices,
-	.devices_count = ARRAY_SIZE(nexcoder_devices),
-};
-
-
 static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
@@ -142,10 +136,14 @@ static void __init nexcoder_map_io(void)
 	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-	s3c24xx_set_board(&nexcoder_board);
+
 	nexcoder_sensorboard_init();
 }
 
+static void __init nexcoder_init(void)
+{
+	platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
+};
 
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
@@ -153,6 +151,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= nexcoder_map_io,
+	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2440/mach-osiris.c

@@ -251,11 +251,6 @@ static struct clk *osiris_clocks[] = {
 	&s3c24xx_uclk,
 };
 
-static struct s3c24xx_board osiris_board __initdata = {
-	.devices       = osiris_devices,
-	.devices_count = ARRAY_SIZE(osiris_devices),
-};
-
 static void __init osiris_map_io(void)
 {
 	unsigned long flags;
@@ -280,7 +275,6 @@ static void __init osiris_map_io(void)
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
-	s3c24xx_set_board(&osiris_board);
 
 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
 
@@ -292,12 +286,18 @@ static void __init osiris_map_io(void)
 	s3c2410_gpio_setpin(S3C2410_GPA0, 1);
 }
 
+static void __init osiris_init(void)
+{
+	platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
+};
+
 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= osiris_map_io,
+	.init_machine	= osiris_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END

arch/arm/mach-s3c2440/mach-rx3715.c

@@ -202,11 +202,6 @@ static struct platform_device *rx3715_devices[] __initdata = {
 	&s3c_device_nand,
 };
 
-static struct s3c24xx_board rx3715_board __initdata = {
-	.devices       = rx3715_devices,
-	.devices_count = ARRAY_SIZE(rx3715_devices)
-};
-
 static void __init rx3715_map_io(void)
 {
 	s3c_device_nand.dev.platform_data = &rx3715_nand_info;
@@ -214,7 +209,6 @@ static void __init rx3715_map_io(void)
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
-	s3c24xx_set_board(&rx3715_board);
 }
 
 static void __init rx3715_init_irq(void)
@@ -230,9 +224,9 @@ static void __init rx3715_init_machine(void)
 	s3c2410_pm_init();
 
 	s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
+	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
 }
 
-
 MACHINE_START(RX3715, "IPAQ-RX3715")
 	/* Maintainer: Ben Dooks <ben@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,

arch/arm/mach-s3c2440/mach-smdk2440.c

@@ -174,23 +174,18 @@ static struct platform_device *smdk2440_devices[] __initdata = {
 	&s3c_device_iis,
 };
 
-static struct s3c24xx_board smdk2440_board __initdata = {
-	.devices       = smdk2440_devices,
-	.devices_count = ARRAY_SIZE(smdk2440_devices)
-};
-
 static void __init smdk2440_map_io(void)
 {
 	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
 	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
-	s3c24xx_set_board(&smdk2440_board);
 }
 
 static void __init smdk2440_machine_init(void)
 {
 	s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
 
+	platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
 	smdk_machine_init();
 }
 

arch/arm/mach-s3c2443/mach-smdk2443.c

@@ -106,21 +106,16 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_i2c,
 };
 
-static struct s3c24xx_board smdk2443_board __initdata = {
-	.devices       = smdk2443_devices,
-	.devices_count = ARRAY_SIZE(smdk2443_devices)
-};
-
 static void __init smdk2443_map_io(void)
 {
 	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
-	s3c24xx_set_board(&smdk2443_board);
 }
 
 static void __init smdk2443_machine_init(void)
 {
+	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
 	smdk_machine_init();
 }
 

arch/arm/plat-s3c24xx/cpu.c

@@ -181,15 +181,6 @@ s3c_lookup_cpu(unsigned long idcode)
 	return NULL;
 }
 
-/* board information */
-
-static struct s3c24xx_board *board;
-
-void s3c24xx_set_board(struct s3c24xx_board *b)
-{
-	board = b;
-}
-
 /* cpu information */
 
 static struct cpu_table *cpu;
@@ -333,26 +324,6 @@ static int __init s3c_arch_init(void)
 		return ret;
 
 	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
-	if (ret != 0)
-		return ret;
-
-	if (board != NULL) {
-		struct platform_device **ptr = board->devices;
-		int i;
-
-		for (i = 0; i < board->devices_count; i++, ptr++) {
-			ret = platform_device_register(*ptr);
-
-			if (ret) {
-				printk(KERN_ERR "s3c24xx: failed to add board device %s (%d) @%p\n", (*ptr)->name, ret, *ptr);
-			}
-		}
-
-		/* mask any error, we may not need all these board
-		 * devices */
-		ret = 0;
-	}
-
 	return ret;
 }
 

include/asm-arm/plat-s3c24xx/cpu.h

@@ -40,19 +40,6 @@ extern void s3c24xx_init_uartdevs(char *name,
 				  struct s3c24xx_uart_resources *res,
 				  struct s3c2410_uartcfg *cfg, int no);
 
-/* the board structure is used at first initialsation time
- * to get info such as the devices to register for this
- * board. This is done because platfrom_add_devices() cannot
- * be called from the map_io entry.
-*/
-
-struct s3c24xx_board {
-	struct platform_device  **devices;
-	unsigned int              devices_count;
-};
-
-extern void s3c24xx_set_board(struct s3c24xx_board *board);
-
 /* timer for 2410/2440 */
 
 struct sys_timer;