rsi: remove redundant device ids

Removing redundant device id's from both usb and sdio idtables, as rsi
driver currently supporting only one module(RS9113). Also, replaced ids
with specific defines.
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/rsi/rsi_91x_sdio.c

@@ -1394,10 +1394,7 @@ static const struct dev_pm_ops rsi_pm_ops = {
 #endif
 
 static const struct sdio_device_id rsi_dev_table[] =  {
-	{ SDIO_DEVICE(0x303, 0x100) },
-	{ SDIO_DEVICE(0x041B, 0x0301) },
-	{ SDIO_DEVICE(0x041B, 0x0201) },
-	{ SDIO_DEVICE(0x041B, 0x9330) },
+	{ SDIO_DEVICE(RSI_SDIO_VID_9113, RSI_SDIO_PID_9113) },
 	{ /* Blank */},
 };
 

drivers/net/wireless/rsi/rsi_91x_usb.c

@@ -835,11 +835,7 @@ static int rsi_resume(struct usb_interface *intf)
 #endif
 
 static const struct usb_device_id rsi_dev_table[] = {
-	{ USB_DEVICE(0x0303, 0x0100) },
-	{ USB_DEVICE(0x041B, 0x0301) },
-	{ USB_DEVICE(0x041B, 0x0201) },
-	{ USB_DEVICE(0x041B, 0x9330) },
-	{ USB_DEVICE(0x1618, 0x9113) },
+	{ USB_DEVICE(RSI_USB_VID_9113, RSI_USB_PID_9113) },
 	{ /* Blank */},
 };
 

drivers/net/wireless/rsi/rsi_sdio.h

@@ -28,6 +28,9 @@
 #include <linux/mmc/sdio_ids.h>
 #include "rsi_main.h"
 
+#define RSI_SDIO_VID_9113    0x041B
+#define RSI_SDIO_PID_9113    0x9330
+
 enum sdio_interrupt_type {
 	BUFFER_FULL         = 0x0,
 	BUFFER_AVAILABLE    = 0x2,

drivers/net/wireless/rsi/rsi_usb.h

@@ -22,6 +22,9 @@
 #include "rsi_main.h"
 #include "rsi_common.h"
 
+#define RSI_USB_VID_9113	0x1618
+#define RSI_USB_PID_9113	0x9113
+
 #define USB_INTERNAL_REG_1           0x25000
 #define RSI_USB_READY_MAGIC_NUM      0xab
 #define FW_STATUS_REG                0x41050012