staging: dgnc: split two assignments into the two assignments on two lines.

split two assignments into the two assignments on two lines.

CC: Lidza Louina <lidza.louina@gmail.com>
CC: Mark Hounschell <markh@compro.net>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/dgnc/TODO

 * checkpatch fixes
-* split two assignments into the two assignments on two lines;
-  don't use two equals signs
 * remove unecessary comments
 * remove unecessary error messages. Example kzalloc() has its 
   own error message. Adding an extra one is useless.

drivers/staging/dgnc/dgnc_cls.c

@@ -493,9 +493,12 @@ static void cls_param(struct tty_struct *tty)
 	 * If baud rate is zero, flush queues, and set mval to drop DTR.
 	 */
 	if ((ch->ch_c_cflag & (CBAUD)) == 0) {
-		ch->ch_r_head = ch->ch_r_tail = 0;
-		ch->ch_e_head = ch->ch_e_tail = 0;
-		ch->ch_w_head = ch->ch_w_tail = 0;
+		ch->ch_r_head = 0;
+		ch->ch_r_tail = 0;
+		ch->ch_e_head = 0;
+		ch->ch_e_tail = 0;
+		ch->ch_w_head = 0;
+		ch->ch_w_tail = 0;
 
 		cls_flush_uart_write(ch);
 		cls_flush_uart_read(ch);
@@ -627,7 +630,8 @@ static void cls_param(struct tty_struct *tty)
 		break;
 	}
 
-	ier = uart_ier = readb(&ch->ch_cls_uart->ier);
+	uart_ier = readb(&ch->ch_cls_uart->ier);
+	ier =  uart_ier;
 	uart_lcr = readb(&ch->ch_cls_uart->lcr);
 
 	if (baud == 0)
@@ -915,7 +919,8 @@ static void cls_copy_data_from_uart_to_queue(struct channel_t *ch)
 		 * I hope thats okay with everyone? Yes? Good.
 		 */
 		while (qleft < 1) {
-			ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK;
+			tail = (tail + 1) & RQUEUEMASK;
+			ch->ch_r_tail = tail;
 			ch->ch_err_overrun++;
 			qleft++;
 		}

drivers/staging/dgnc/dgnc_driver.c

@@ -410,14 +410,16 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
 	unsigned long flags;
 
 	/* get the board structure and prep it */
-	brd = dgnc_Board[dgnc_NumBoards] =
-		kzalloc(sizeof(*brd), GFP_KERNEL);
+	dgnc_Board[dgnc_NumBoards] = kzalloc(sizeof(*brd), GFP_KERNEL);
+	brd = dgnc_Board[dgnc_NumBoards];
+
 	if (!brd)
 		return -ENOMEM;
 
 	/* make a temporary message buffer for the boot messages */
-	brd->msgbuf = brd->msgbuf_head =
-		kzalloc(sizeof(u8) * 8192, GFP_KERNEL);
+	brd->msgbuf_head = kzalloc(sizeof(u8) * 8192, GFP_KERNEL);
+	brd->msgbuf = brd->msgbuf_head;
+
 	if (!brd->msgbuf) {
 		kfree(brd);
 		return -ENOMEM;

drivers/staging/dgnc/dgnc_neo.c

@@ -626,9 +626,12 @@ static void neo_param(struct tty_struct *tty)
 	 * If baud rate is zero, flush queues, and set mval to drop DTR.
 	 */
 	if ((ch->ch_c_cflag & (CBAUD)) == 0) {
-		ch->ch_r_head = ch->ch_r_tail = 0;
-		ch->ch_e_head = ch->ch_e_tail = 0;
-		ch->ch_w_head = ch->ch_w_tail = 0;
+		ch->ch_r_head = 0;
+		ch->ch_r_tail = 0;
+		ch->ch_e_head = 0;
+		ch->ch_e_tail = 0;
+		ch->ch_w_head = 0;
+		ch->ch_w_tail = 0;
 
 		neo_flush_uart_write(ch);
 		neo_flush_uart_read(ch);
@@ -754,7 +757,9 @@ static void neo_param(struct tty_struct *tty)
 		break;
 	}
 
-	ier = uart_ier = readb(&ch->ch_neo_uart->ier);
+	uart_ier = readb(&ch->ch_neo_uart->ier);
+	ier = uart_ier;
+
 	uart_lcr = readb(&ch->ch_neo_uart->lcr);
 
 	if (baud == 0)
@@ -1285,7 +1290,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		 * I hope thats okay with everyone? Yes? Good.
 		 */
 		while (qleft < 1) {
-			ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK;
+			tail = (tail + 1) & RQUEUEMASK;
+			ch->ch_r_tail = tail;
 			ch->ch_err_overrun++;
 			qleft++;
 		}

drivers/staging/dgnc/dgnc_tty.c

@@ -1293,9 +1293,12 @@ static int dgnc_tty_open(struct tty_struct *tty, struct file *file)
 		/*
 		 * Flush input queues.
 		 */
-		ch->ch_r_head = ch->ch_r_tail = 0;
-		ch->ch_e_head = ch->ch_e_tail = 0;
-		ch->ch_w_head = ch->ch_w_tail = 0;
+		ch->ch_r_head = 0;
+		ch->ch_r_tail = 0;
+		ch->ch_e_head = 0;
+		ch->ch_e_tail = 0;
+		ch->ch_w_head = 0;
+		ch->ch_w_tail = 0;
 
 		brd->bd_ops->flush_uart_write(ch);
 		brd->bd_ops->flush_uart_read(ch);