drm/radeon: fix hdmi audio on DCE3.0/3.1 asics

These asics seem to use a mix of the DCE2.x and
DCE3.2 audio interfaces despite what the register spec
says.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=69729
https://bugs.freedesktop.org/show_bug.cgi?id=69671Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drivers/gpu/drm/radeon/r600_hdmi.c

@@ -257,10 +257,7 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 	 * number (coefficient of two integer numbers.  DCCG_AUDIO_DTOx_PHASE
 	 * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
 	 */
-	if (ASIC_IS_DCE3(rdev)) {
-		/* according to the reg specs, this should DCE3.2 only, but in
-		 * practice it seems to cover DCE3.0 as well.
-		 */
+	if (ASIC_IS_DCE32(rdev)) {
 		if (dig->dig_encoder == 0) {
 			dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
 			dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
@@ -276,8 +273,21 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 			WREG32(DCCG_AUDIO_DTO1_MODULE, dto_modulo);
 			WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
 		}
+	} else if (ASIC_IS_DCE3(rdev)) {
+		/* according to the reg specs, this should DCE3.2 only, but in
+		 * practice it seems to cover DCE3.0/3.1 as well.
+		 */
+		if (dig->dig_encoder == 0) {
+			WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
+			WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
+			WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
+		} else {
+			WREG32(DCCG_AUDIO_DTO1_PHASE, base_rate * 100);
+			WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100);
+			WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
+		}
 	} else {
-		/* according to the reg specs, this should be DCE2.0 and DCE3.0 */
+		/* according to the reg specs, this should be DCE2.0 and DCE3.0/3.1 */
 		WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
 		       AUDIO_DTO_MODULE(clock / 10));
 	}