scsi: qla2xxx: Insert spaces where required

Improve source code readability by inserting spaces where these are
required according to the coding standard. This patch only inserts
whitespace and does not make any other changes.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/qla2xxx/qla_attr.c

@@ -888,7 +888,7 @@ qla2x00_sysfs_read_xgmac_stats(struct file *filp, struct kobject *kobj,
 		count = 0;
 	}
 
-	count = actual_size > count ? count: actual_size;
+	count = actual_size > count ? count : actual_size;
 	memcpy(buf, ha->xgmac_data, count);
 
 	return count;
@@ -2811,8 +2811,8 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 
 	/* initialized vport states */
 	atomic_set(&vha->loop_state, LOOP_DOWN);
-	vha->vp_err_state=  VP_ERR_PORTDWN;
-	vha->vp_prev_err_state=  VP_ERR_UNKWN;
+	vha->vp_err_state = VP_ERR_PORTDWN;
+	vha->vp_prev_err_state = VP_ERR_UNKWN;
 	/* Check if physical ha port is Up */
 	if (atomic_read(&base_vha->loop_state) == LOOP_DOWN ||
 	    atomic_read(&base_vha->loop_state) == LOOP_DEAD) {

drivers/scsi/qla2xxx/qla_dbg.c

@@ -445,7 +445,7 @@ qla2xxx_dump_ram(struct qla_hw_data *ha, uint32_t addr, uint16_t *ram,
 		}
 	}
 
-	*nxt = rval == QLA_SUCCESS ? &ram[cnt]: NULL;
+	*nxt = rval == QLA_SUCCESS ? &ram[cnt] : NULL;
 	return rval;
 }
 

drivers/scsi/qla2xxx/qla_gs.c

@@ -2448,7 +2448,7 @@ qla2x00_fdmiv2_rpa(scsi_qla_host_t *vha)
 	eiter->type = cpu_to_be16(FDMI_PORT_MAX_FRAME_SIZE);
 	eiter->len = cpu_to_be16(4 + 4);
 	eiter->a.max_frame_size = IS_FWI2_CAPABLE(ha) ?
-	    le16_to_cpu(icb24->frame_payload_size):
+	    le16_to_cpu(icb24->frame_payload_size) :
 	    le16_to_cpu(ha->init_cb->frame_payload_size);
 	eiter->a.max_frame_size = cpu_to_be32(eiter->a.max_frame_size);
 	size += 4 + 4;

drivers/scsi/qla2xxx/qla_init.c

@@ -4711,7 +4711,7 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
 			ha->zio_mode = icb->add_firmware_options[0] &
 			    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
 			ha->zio_timer = icb->interrupt_delay_timer ?
-			    icb->interrupt_delay_timer: 2;
+			    icb->interrupt_delay_timer : 2;
 		}
 		icb->add_firmware_options[0] &=
 		    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
@@ -4744,7 +4744,7 @@ qla2x00_rport_del(void *data)
 	unsigned long flags;
 
 	spin_lock_irqsave(fcport->vha->host->host_lock, flags);
-	rport = fcport->drport ? fcport->drport: fcport->rport;
+	rport = fcport->drport ? fcport->drport : fcport->rport;
 	fcport->drport = NULL;
 	spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
 	if (rport) {
@@ -7208,11 +7208,11 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 	ha->flags.disable_risc_code_load = 0;
 	ha->flags.enable_lip_reset = 0;
 	ha->flags.enable_lip_full_login =
-	    le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+	    le32_to_cpu(nv->host_p) & BIT_10 ? 1 : 0;
 	ha->flags.enable_target_reset =
-	    le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
+	    le32_to_cpu(nv->host_p) & BIT_11 ? 1 : 0;
 	ha->flags.enable_led_scheme = 0;
-	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
+	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1 : 0;
 
 	ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
 	    (BIT_6 | BIT_5 | BIT_4)) >> 4;
@@ -7286,7 +7286,7 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 		ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
 		    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
 		ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
-		    le16_to_cpu(icb->interrupt_delay_timer): 2;
+		    le16_to_cpu(icb->interrupt_delay_timer) : 2;
 	}
 	icb->firmware_options_2 &= cpu_to_le32(
 	    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
@@ -8232,7 +8232,7 @@ qla84xx_init_chip(scsi_qla_host_t *vha)
 
 	mutex_unlock(&ha->cs84xx->fw_update_mutex);
 
-	return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
+	return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED :
 	    QLA_SUCCESS;
 }
 
@@ -8428,11 +8428,11 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 	ha->flags.disable_risc_code_load = 0;
 	ha->flags.enable_lip_reset = 0;
 	ha->flags.enable_lip_full_login =
-	    le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+	    le32_to_cpu(nv->host_p) & BIT_10 ? 1 : 0;
 	ha->flags.enable_target_reset =
-	    le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
+	    le32_to_cpu(nv->host_p) & BIT_11 ? 1 : 0;
 	ha->flags.enable_led_scheme = 0;
-	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
+	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1 : 0;
 
 	ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
 	    (BIT_6 | BIT_5 | BIT_4)) >> 4;
@@ -8505,7 +8505,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
 		    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
 		ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
-		    le16_to_cpu(icb->interrupt_delay_timer): 2;
+		    le16_to_cpu(icb->interrupt_delay_timer) : 2;
 	}
 	icb->firmware_options_2 &= cpu_to_le32(
 	    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));

drivers/scsi/qla2xxx/qla_iocb.c

@@ -2494,7 +2494,7 @@ qla2x00_logout_iocb(srb_t *sp, struct mbx_entry *mbx)
 	SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
 	mbx->mb0 = cpu_to_le16(MBC_LOGOUT_FABRIC_PORT);
 	mbx->mb1 = HAS_EXTENDED_IDS(ha) ?
-	    cpu_to_le16(sp->fcport->loop_id):
+	    cpu_to_le16(sp->fcport->loop_id) :
 	    cpu_to_le16(sp->fcport->loop_id << 8);
 	mbx->mb2 = cpu_to_le16(sp->fcport->d_id.b.domain);
 	mbx->mb3 = cpu_to_le16(sp->fcport->d_id.b.area << 8 |

drivers/scsi/qla2xxx/qla_mbx.c

@@ -2033,7 +2033,7 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
 
 		/* Passback COS information. */
 		fcport->supported_classes = (pd->options & BIT_4) ?
-		    FC_COS_CLASS2: FC_COS_CLASS3;
+		    FC_COS_CLASS2 : FC_COS_CLASS3;
 	}
 
 gpd_error_out:
@@ -3277,7 +3277,7 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 
 	/* Issue marker IOCB. */
 	rval2 = qla2x00_marker(vha, ha->base_qpair, fcport->loop_id, l,
-	    type == TCF_LUN_RESET ? MK_SYNC_ID_LUN: MK_SYNC_ID);
+	    type == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID);
 	if (rval2 != QLA_SUCCESS) {
 		ql_dbg(ql_dbg_mbx, vha, 0x1099,
 		    "Failed to issue marker IOCB (%x).\n", rval2);

drivers/scsi/qla2xxx/qla_os.c

@@ -108,7 +108,7 @@ MODULE_PARM_DESC(ql2xshiftctondsd,
 		"Set to control shifting of command type processing "
 		"based on total number of SG elements.");
 
-int ql2xfdmienable=1;
+int ql2xfdmienable = 1;
 module_param(ql2xfdmienable, int, S_IRUGO|S_IWUSR);
 module_param_named(fdmi, ql2xfdmienable, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xfdmienable,
@@ -154,7 +154,7 @@ MODULE_PARM_DESC(ql2xenablehba_err_chk,
 		"  1 -- Error isolation enabled only for DIX Type 0\n"
 		"  2 -- Error isolation enabled for all Types\n");
 
-int ql2xiidmaenable=1;
+int ql2xiidmaenable = 1;
 module_param(ql2xiidmaenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xiidmaenable,
 		"Enables iIDMA settings "

drivers/scsi/qla2xxx/qla_sup.c

@@ -987,7 +987,7 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *vha)
 		ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0300 |
 		    fdt->unprotect_sec_cmd);
 		ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
-		    flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd):
+		    flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd) :
 		    flash_conf_addr(ha, 0x0336);
 	}
 	goto done;

drivers/scsi/qla2xxx/qla_target.h

@@ -855,7 +855,7 @@ enum trace_flags {
 	TRC_CTIO_ERR = BIT_11,
 	TRC_CTIO_DONE = BIT_12,
 	TRC_CTIO_ABORTED =  BIT_13,
-	TRC_CTIO_STRANGE= BIT_14,
+	TRC_CTIO_STRANGE = BIT_14,
 	TRC_CMD_DONE = BIT_15,
 	TRC_CMD_CHK_STOP = BIT_16,
 	TRC_CMD_FREE = BIT_17,