ncr5380: Fix whitespace in comments using regexp

Hanging indentation was a poor choice for the text inside comments. It
has been used in the wrong places and done badly elsewhere. There is
little consistency within any file. One fork of the core driver uses
tabs for this indentation while the other uses spaces. Better to use
flush-left alignment throughout.

This patch is the result of the following substitution. It replaces tabs
and spaces at the start of a comment line with a single space.

perl -i -pe 's,^(\t*[/ ]\*)[ \t]+,$1 ,' drivers/scsi/{atari_,}NCR5380.c

This removes some unimportant discrepancies between the two core driver
forks so that the important ones become obvious, to facilitate
reunification.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/atari_NCR5380.c

 /*
  * NCR 5380 generic driver routines.  These should make it *trivial*
- *	to implement 5380 SCSI drivers under Linux with a non-trantor
- *	architecture.
+ * to implement 5380 SCSI drivers under Linux with a non-trantor
+ * architecture.
  *
- *	Note that these routines also work with NR53c400 family chips.
+ * Note that these routines also work with NR53c400 family chips.
  *
  * Copyright 1993, Drew Eckhardt
- *	Visionary Computing
- *	(Unix and Linux consulting and custom programming)
- *	drew@colorado.edu
- *	+1 (303) 666-5836
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * drew@colorado.edu
+ * +1 (303) 666-5836
  *
  * For more information, please consult
  *
@@ -93,10 +93,10 @@
  *
  * These macros control options :
  * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- *	for commands that return with a CHECK CONDITION status.
+ * for commands that return with a CHECK CONDITION status.
  *
  * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
- *	transceivers.
+ * transceivers.
  *
  * REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
  *
@@ -109,17 +109,17 @@
  * NCR5380_write(register, value) - write to the specific register
  *
  * NCR5380_implementation_fields  - additional fields needed for this
- *      specific implementation of the NCR5380
+ * specific implementation of the NCR5380
  *
  * Either real DMA *or* pseudo DMA may be implemented
  * REAL functions :
  * NCR5380_REAL_DMA should be defined if real DMA is to be used.
  * Note that the DMA setup functions should return the number of bytes
- *	that they were able to program the controller for.
+ * that they were able to program the controller for.
  *
  * Also note that generic i386/PC versions of these macros are
- *	available as NCR5380_i386_dma_write_setup,
- *	NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
+ * available as NCR5380_i386_dma_write_setup,
+ * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
  *
  * NCR5380_dma_write_setup(instance, src, count) - initialize
  * NCR5380_dma_read_setup(instance, dst, count) - initialize
@@ -974,7 +974,7 @@ static void NCR5380_main(struct work_struct *work)
  * Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
  *
  * Purpose : Called by interrupt handler when DMA finishes or a phase
- *	mismatch occurs (which would finish the DMA transfer).
+ * mismatch occurs (which would finish the DMA transfer).
  *
  * Inputs : instance - this instance of the NCR5380.
  */
@@ -1161,31 +1161,31 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
 
 /*
  * Function : int NCR5380_select(struct Scsi_Host *instance,
- *                               struct scsi_cmnd *cmd)
+ * struct scsi_cmnd *cmd)
  *
  * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- *	including ARBITRATION, SELECTION, and initial message out for
- *	IDENTIFY and queue messages.
+ * including ARBITRATION, SELECTION, and initial message out for
+ * IDENTIFY and queue messages.
  *
  * Inputs : instance - instantiation of the 5380 driver on which this
- *	target lives, cmd - SCSI command to execute.
+ * target lives, cmd - SCSI command to execute.
  *
  * Returns cmd if selection failed but should be retried,
  * NULL if selection failed and should not be retried, or
  * NULL if selection succeeded (hostdata->connected == cmd).
  *
  * Side effects :
- *	If bus busy, arbitration failed, etc, NCR5380_select() will exit
- *		with registers as they should have been on entry - ie
- *		SELECT_ENABLE will be set appropriately, the NCR5380
- *		will cease to drive any SCSI bus signals.
+ * If bus busy, arbitration failed, etc, NCR5380_select() will exit
+ * with registers as they should have been on entry - ie
+ * SELECT_ENABLE will be set appropriately, the NCR5380
+ * will cease to drive any SCSI bus signals.
  *
- *	If successful : I_T_L or I_T_L_Q nexus will be established,
- *		instance->connected will be set to cmd.
- *		SELECT interrupt will be disabled.
+ * If successful : I_T_L or I_T_L_Q nexus will be established,
+ * instance->connected will be set to cmd.
+ * SELECT interrupt will be disabled.
  *
- *	If failed (no target) : cmd->scsi_done() will be called, and the
- *		cmd->result host byte set to DID_BAD_TARGET.
+ * If failed (no target) : cmd->scsi_done() will be called, and the
+ * cmd->result host byte set to DID_BAD_TARGET.
  */
 
 static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
@@ -1398,8 +1398,8 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 	 * until it wraps back to 0.
 	 *
 	 * XXX - it turns out that there are some broken SCSI-II devices,
-	 *	     which claim to support tagged queuing but fail when more than
-	 *	     some number of commands are issued at once.
+	 * which claim to support tagged queuing but fail when more than
+	 * some number of commands are issued at once.
 	 */
 
 	/* Wait for start of REQ/ACK handshake */
@@ -1461,19 +1461,19 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 
 /*
  * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
- *      unsigned char *phase, int *count, unsigned char **data)
+ * unsigned char *phase, int *count, unsigned char **data)
  *
  * Purpose : transfers data in given phase using polled I/O
  *
  * Inputs : instance - instance of driver, *phase - pointer to
- *	what phase is expected, *count - pointer to number of
- *	bytes to transfer, **data - pointer to data pointer.
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
  *
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes are transferred or exit
- *	is in same phase.
+ * maximum number of bytes, 0 if all bytes are transferred or exit
+ * is in same phase.
  *
- *	Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
  *
  * XXX Note : handling for bus free may be useful.
  */
@@ -1560,11 +1560,11 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance,
 		/*
 		 * We have several special cases to consider during REQ/ACK handshaking :
 		 * 1.  We were in MSGOUT phase, and we are on the last byte of the
-		 *	message.  ATN must be dropped as ACK is dropped.
+		 * message.  ATN must be dropped as ACK is dropped.
 		 *
 		 * 2.  We are in a MSGIN phase, and we are on the last byte of the
-		 *	message.  We must exit with ACK asserted, so that the calling
-		 *	code may raise ATN before dropping ACK to reject the message.
+		 * message.  We must exit with ACK asserted, so that the calling
+		 * code may raise ATN before dropping ACK to reject the message.
 		 *
 		 * 3.  ACK and ATN are clear and the target may proceed as normal.
 		 */
@@ -1687,20 +1687,20 @@ static int do_abort(struct Scsi_Host *instance)
 #if defined(REAL_DMA)
 /*
  * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
- *      unsigned char *phase, int *count, unsigned char **data)
+ * unsigned char *phase, int *count, unsigned char **data)
  *
  * Purpose : transfers data in given phase using either real
- *	or pseudo DMA.
+ * or pseudo DMA.
  *
  * Inputs : instance - instance of driver, *phase - pointer to
- *	what phase is expected, *count - pointer to number of
- *	bytes to transfer, **data - pointer to data pointer.
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
  *
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes or transferred or exit
- *	is in same phase.
+ * maximum number of bytes, 0 if all bytes or transferred or exit
+ * is in same phase.
  *
- *	Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
  */
 
 
@@ -1799,17 +1799,17 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
  * Function : NCR5380_information_transfer (struct Scsi_Host *instance)
  *
  * Purpose : run through the various SCSI phases and do as the target
- *	directs us to.  Operates on the currently connected command,
- *	instance->connected.
+ * directs us to.  Operates on the currently connected command,
+ * instance->connected.
  *
  * Inputs : instance, instance for which we are doing commands
  *
  * Side effects : SCSI things happen, the disconnected queue will be
- *	modified if a command disconnects, *instance->connected will
- *	change.
+ * modified if a command disconnects, *instance->connected will
+ * change.
  *
  * XXX Note : we need to watch for bus free or a reset condition here
- *	to recover from an unexpected bus free condition.
+ * to recover from an unexpected bus free condition.
  */
 
 static void NCR5380_information_transfer(struct Scsi_Host *instance)
@@ -1919,7 +1919,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				 */
 
 				/* ++roman: I suggest, this should be
-				 *   #if def(REAL_DMA)
+				 * #if def(REAL_DMA)
 				 * instead of leaving REAL_DMA out.
 				 */
 
@@ -2215,8 +2215,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
  * Function : void NCR5380_reselect (struct Scsi_Host *instance)
  *
  * Purpose : does reselection, initializing the instance->connected
- *	field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
- *	nexus has been reestablished,
+ * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
+ * nexus has been reestablished,
  *
  * Inputs : instance - this instance of the NCR5380.
  */