Commit 595e23f3 authored by Timur Tabi's avatar Timur Tabi Committed by Kumar Gala

powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD

The ULI 1575 PCI quirk function for the Freescale MPC8610 HPCD was disabling
the SATA INTx interrupt, even when SATA support was enabled.  This was safe,
because the SATA driver re-enabled it.  But with commit a5bfc471 ("ahci: drop
intx manipulation on msi enable"), the driver no longer does this, and so SATA
support on the 8610 HPCD is broken.

The original quirk function disabled INTx because it caused some other
interrupt problem during early development on this board, but no one remembers
any more what that problem was, and it doesn't seem to occur any more.
Signed-off-by: default avatarTimur Tabi <timur@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 0dbbbf1a
...@@ -275,11 +275,6 @@ static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev) ...@@ -275,11 +275,6 @@ static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
if (!machine_is(mpc86xx_hpcd)) if (!machine_is(mpc86xx_hpcd))
return; return;
/* Interrupt Disable, Needed when SATA disabled */
pci_read_config_word(dev, PCI_COMMAND, &temp);
temp |= 1<<10;
pci_write_config_word(dev, PCI_COMMAND, temp);
pci_read_config_byte(dev, 0x83, &c); pci_read_config_byte(dev, 0x83, &c);
c |= 0x80; c |= 0x80;
pci_write_config_byte(dev, 0x83, c); pci_write_config_byte(dev, 0x83, c);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment