serial: Add driver for LPC32xx High Speed UARTs

This patch adds a driver for the 3 High Speed UARTs of the LPC32xx SoC that
support up to 921600bps. These UARTs are different from the 4 "Standard" UARTs
of the LPC32xx.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt

+* NXP LPC32xx SoC High Speed UART
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-hsuart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+
+Example:
+
+	uart1: serial@40014000 {
+		compatible = "nxp,lpc3220-hsuart";
+		reg = <0x40014000 0x1000>;
+		interrupts = <26 0>;
+	};

drivers/tty/serial/Kconfig

@@ -704,6 +704,25 @@ config SERIAL_PNX8XXX_CONSOLE
 	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
 	  and you want to use serial console, say Y. Otherwise, say N.
 
+config SERIAL_HS_LPC32XX
+	tristate "LPC32XX high speed serial port support"
+	depends on ARCH_LPC32XX && OF
+	select SERIAL_CORE
+	help
+	  Support for the LPC32XX high speed serial ports (up to 900kbps).
+	  Those are UARTs completely different from the Standard UARTs on the
+	  LPC32XX SoC.
+	  Choose M or Y here to build this driver.
+
+config SERIAL_HS_LPC32XX_CONSOLE
+	bool "Enable LPC32XX high speed UART serial console"
+	depends on SERIAL_HS_LPC32XX
+	select SERIAL_CORE_CONSOLE
+	help
+	  If you would like to be able to use one of the high speed serial
+	  ports on the LPC32XX as the console, you can do so by answering
+	  Y to this option.
+
 config SERIAL_CORE
 	tristate
 

drivers/tty/serial/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
+obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_ZS) += zs.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o