Commit 5992cd46 authored by Duncan Sands's avatar Duncan Sands Committed by Greg Kroah-Hartman

[PATCH] USB speedtouch: extra debug messages

parent 8a817d84
......@@ -883,8 +883,10 @@ static int udsl_atm_open (struct atm_vcc *vcc, short vpi, int vci)
return -EINVAL;
/* only support AAL5 */
if ((vcc->qos.aal != ATM_AAL5) || (vcc->qos.rxtp.max_sdu < 0) || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU))
if ((vcc->qos.aal != ATM_AAL5) || (vcc->qos.rxtp.max_sdu < 0) || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU)) {
dbg ("udsl_atm_open: unsupported ATM type %d!", vcc->qos.aal);
return -EINVAL;
}
if (!instance->firmware_loaded) {
dbg ("udsl_atm_open: firmware not loaded!");
......@@ -894,11 +896,13 @@ static int udsl_atm_open (struct atm_vcc *vcc, short vpi, int vci)
down (&instance->serialize); /* vs self, udsl_atm_close */
if (udsl_find_vcc (instance, vpi, vci)) {
dbg ("udsl_atm_open: %hd/%d already in use!", vpi, vci);
up (&instance->serialize);
return -EADDRINUSE;
}
if (!(new = kmalloc (sizeof (struct udsl_vcc_data), GFP_KERNEL))) {
dbg ("udsl_atm_open: no memory for vcc_data!");
up (&instance->serialize);
return -ENOMEM;
}
......@@ -1216,7 +1220,7 @@ static void udsl_usb_disconnect (struct usb_interface *intf)
for (i = 0; i < num_rcv_urbs; i++)
if ((result = usb_unlink_urb (instance->receivers [i].urb)) < 0)
dbg ("udsl_usb_disconnect: usb_unlink_urb on receive urb %d returned %d", i, result);
dbg ("udsl_usb_disconnect: usb_unlink_urb on receive urb %d returned %d!", i, result);
/* wait for completion handlers to finish */
do {
......@@ -1252,7 +1256,7 @@ static void udsl_usb_disconnect (struct usb_interface *intf)
for (i = 0; i < num_snd_urbs; i++)
if ((result = usb_unlink_urb (instance->senders [i].urb)) < 0)
dbg ("udsl_usb_disconnect: usb_unlink_urb on send urb %d returned %d", i, result);
dbg ("udsl_usb_disconnect: usb_unlink_urb on send urb %d returned %d!", i, result);
/* wait for completion handlers to finish */
do {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment