Merge branch 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc into topic/asoc

Documentation/devicetree/bindings/sound/omap-dmic.txt

+* Texas Instruments OMAP4+ Digital Microphone Module
+
+Required properties:
+- compatible: "ti,omap4-dmic"
+- reg: Register location and size as an array:
+       <MPU access base address, size>,
+       <L3 interconnect address, size>;
+- interrupts: Interrupt number for DMIC
+- interrupt-parent: The parent interrupt controller
+- ti,hwmods: Name of the hwmod associated with OMAP dmic IP
+
+Example:
+
+dmic: dmic@4012e000 {
+	compatible = "ti,omap4-dmic";
+	reg = <0x4012e000 0x7f>, /* MPU private access */
+	      <0x4902e000 0x7f>; /* L3 Interconnect */
+	interrupts = <0 114 0x4>;
+	interrupt-parent = <&gic>;
+	ti,hwmods = "dmic";
+};

Documentation/devicetree/bindings/sound/omap-mcpdm.txt

+* Texas Instruments OMAP4+ McPDM
+
+Required properties:
+- compatible: "ti,omap4-mcpdm"
+- reg: Register location and size as an array:
+       <MPU access base address, size>,
+       <L3 interconnect address, size>;
+- interrupts: Interrupt number for McPDM
+- interrupt-parent: The parent interrupt controller
+- ti,hwmods: Name of the hwmod associated to the McPDM
+
+Example:
+
+mcpdm: mcpdm@40132000 {
+	compatible = "ti,omap4-mcpdm";
+	reg = <0x40132000 0x7f>, /* MPU private access */
+	      <0x49032000 0x7f>; /* L3 Interconnect */
+	interrupts = <0 112 0x4>;
+	interrupt-parent = <&gic>;
+	ti,hwmods = "mcpdm";
+};

sound/soc/omap/Kconfig

@@ -109,11 +109,12 @@ config SND_OMAP_SOC_OMAP_ABE_TWL6040
 	  - PandaBoard (4430)
 	  - PandaBoardES (4460)
 
-config SND_OMAP_SOC_OMAP4_HDMI
-	tristate "SoC Audio support for Texas Instruments OMAP4 HDMI"
-	depends on SND_OMAP_SOC && OMAP4_DSS_HDMI && OMAP2_DSS && ARCH_OMAP4
+config SND_OMAP_SOC_OMAP_HDMI
+	tristate "SoC Audio support for Texas Instruments OMAP HDMI"
+	depends on SND_OMAP_SOC && OMAP4_DSS_HDMI && OMAP2_DSS
 	select SND_OMAP_SOC_HDMI
 	select SND_SOC_OMAP_HDMI_CODEC
+	select OMAP4_DSS_HDMI_AUDIO
 	help
 	  Say Y if you want to add support for SoC HDMI audio on Texas Instruments
 	  OMAP4 chips

sound/soc/omap/Makefile

@@ -25,7 +25,7 @@ snd-soc-omap3pandora-objs := omap3pandora.o
 snd-soc-omap3beagle-objs := omap3beagle.o
 snd-soc-zoom2-objs := zoom2.o
 snd-soc-igep0020-objs := igep0020.o
-snd-soc-omap4-hdmi-objs := omap4-hdmi-card.o
+snd-soc-omap-hdmi-card-objs := omap-hdmi-card.o
 
 obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
 obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o
@@ -41,4 +41,4 @@ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
 obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o
 obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o
-obj-$(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) += snd-soc-omap4-hdmi.o
+obj-$(CONFIG_SND_OMAP_SOC_OMAP_HDMI) += snd-soc-omap-hdmi-card.o

sound/soc/omap/mcbsp.c

@@ -109,6 +109,47 @@ static void omap_mcbsp_dump_reg(struct omap_mcbsp *mcbsp)
 	dev_dbg(mcbsp->dev, "***********************\n");
 }
 
+static irqreturn_t omap_mcbsp_irq_handler(int irq, void *dev_id)
+{
+	struct omap_mcbsp *mcbsp = dev_id;
+	u16 irqst;
+
+	irqst = MCBSP_READ(mcbsp, IRQST);
+	dev_dbg(mcbsp->dev, "IRQ callback : 0x%x\n", irqst);
+
+	if (irqst & RSYNCERREN)
+		dev_err(mcbsp->dev, "RX Frame Sync Error!\n");
+	if (irqst & RFSREN)
+		dev_dbg(mcbsp->dev, "RX Frame Sync\n");
+	if (irqst & REOFEN)
+		dev_dbg(mcbsp->dev, "RX End Of Frame\n");
+	if (irqst & RRDYEN)
+		dev_dbg(mcbsp->dev, "RX Buffer Threshold Reached\n");
+	if (irqst & RUNDFLEN)
+		dev_err(mcbsp->dev, "RX Buffer Underflow!\n");
+	if (irqst & ROVFLEN)
+		dev_err(mcbsp->dev, "RX Buffer Overflow!\n");
+
+	if (irqst & XSYNCERREN)
+		dev_err(mcbsp->dev, "TX Frame Sync Error!\n");
+	if (irqst & XFSXEN)
+		dev_dbg(mcbsp->dev, "TX Frame Sync\n");
+	if (irqst & XEOFEN)
+		dev_dbg(mcbsp->dev, "TX End Of Frame\n");
+	if (irqst & XRDYEN)
+		dev_dbg(mcbsp->dev, "TX Buffer threshold Reached\n");
+	if (irqst & XUNDFLEN)
+		dev_err(mcbsp->dev, "TX Buffer Underflow!\n");
+	if (irqst & XOVFLEN)
+		dev_err(mcbsp->dev, "TX Buffer Overflow!\n");
+	if (irqst & XEMPTYEOFEN)
+		dev_dbg(mcbsp->dev, "TX Buffer empty at end of frame\n");
+
+	MCBSP_WRITE(mcbsp, IRQST, irqst);
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_tx = dev_id;
@@ -176,6 +217,10 @@ void omap_mcbsp_config(struct omap_mcbsp *mcbsp,
 	/* Enable wakeup behavior */
 	if (mcbsp->pdata->has_wakeup)
 		MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
+
+	/* Enable TX/RX sync error interrupts by default */
+	if (mcbsp->irq)
+		MCBSP_WRITE(mcbsp, IRQEN, RSYNCERREN | XSYNCERREN);
 }
 
 /**
@@ -489,23 +534,25 @@ int omap_mcbsp_request(struct omap_mcbsp *mcbsp)
 	MCBSP_WRITE(mcbsp, SPCR1, 0);
 	MCBSP_WRITE(mcbsp, SPCR2, 0);
 
-	err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler,
-				0, "McBSP", (void *)mcbsp);
-	if (err != 0) {
-		dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
-				"for McBSP%d\n", mcbsp->tx_irq,
-				mcbsp->id);
-		goto err_clk_disable;
-	}
+	if (mcbsp->irq) {
+		err = request_irq(mcbsp->irq, omap_mcbsp_irq_handler, 0,
+				  "McBSP", (void *)mcbsp);
+		if (err != 0) {
+			dev_err(mcbsp->dev, "Unable to request IRQ\n");
+			goto err_clk_disable;
+		}
+	} else {
+		err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, 0,
+				  "McBSP TX", (void *)mcbsp);
+		if (err != 0) {
+			dev_err(mcbsp->dev, "Unable to request TX IRQ\n");
+			goto err_clk_disable;
+		}
 
-	if (mcbsp->rx_irq) {
-		err = request_irq(mcbsp->rx_irq,
-				omap_mcbsp_rx_irq_handler,
-				0, "McBSP", (void *)mcbsp);
+		err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, 0,
+				  "McBSP RX", (void *)mcbsp);
 		if (err != 0) {
-			dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
-					"for McBSP%d\n", mcbsp->rx_irq,
-					mcbsp->id);
+			dev_err(mcbsp->dev, "Unable to request RX IRQ\n");
 			goto err_free_irq;
 		}
 	}
@@ -542,9 +589,16 @@ void omap_mcbsp_free(struct omap_mcbsp *mcbsp)
 	if (mcbsp->pdata->has_wakeup)
 		MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
 
-	if (mcbsp->rx_irq)
+	/* Disable interrupt requests */
+	if (mcbsp->irq)
+		MCBSP_WRITE(mcbsp, IRQEN, 0);
+
+	if (mcbsp->irq) {
+		free_irq(mcbsp->irq, (void *)mcbsp);
+	} else {
 		free_irq(mcbsp->rx_irq, (void *)mcbsp);
-	free_irq(mcbsp->tx_irq, (void *)mcbsp);
+		free_irq(mcbsp->tx_irq, (void *)mcbsp);
+	}
 
 	reg_cache = mcbsp->reg_cache;
 
@@ -754,7 +808,7 @@ THRESHOLD_PROP_BUILDER(max_tx_thres);
 THRESHOLD_PROP_BUILDER(max_rx_thres);
 
 static const char *dma_op_modes[] = {
-	"element", "threshold", "frame",
+	"element", "threshold",
 };
 
 static ssize_t dma_op_mode_show(struct device *dev,
@@ -949,13 +1003,24 @@ int __devinit omap_mcbsp_init(struct platform_device *pdev)
 	else
 		mcbsp->phys_dma_base = res->start;
 
-	mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
-	mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
-
-	/* From OMAP4 there will be a single irq line */
-	if (mcbsp->tx_irq == -ENXIO) {
-		mcbsp->tx_irq = platform_get_irq(pdev, 0);
-		mcbsp->rx_irq = 0;
+	/*
+	 * OMAP1, 2 uses two interrupt lines: TX, RX
+	 * OMAP2430, OMAP3 SoC have combined IRQ line as well.
+	 * OMAP4 and newer SoC only have the combined IRQ line.
+	 * Use the combined IRQ if available since it gives better debugging
+	 * possibilities.
+	 */
+	mcbsp->irq = platform_get_irq_byname(pdev, "common");
+	if (mcbsp->irq == -ENXIO) {
+		mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
+
+		if (mcbsp->tx_irq == -ENXIO) {
+			mcbsp->irq = platform_get_irq(pdev, 0);
+			mcbsp->tx_irq = 0;
+		} else {
+			mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
+			mcbsp->irq = 0;
+		}
 	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");

sound/soc/omap/mcbsp.h

@@ -217,17 +217,20 @@ enum {
 /********************** McBSP DMA operating modes **************************/
 #define MCBSP_DMA_MODE_ELEMENT		0
 #define MCBSP_DMA_MODE_THRESHOLD	1
-#define MCBSP_DMA_MODE_FRAME		2
 
-/********************** McBSP WAKEUPEN bit definitions *********************/
+/********************** McBSP WAKEUPEN/IRQST/IRQEN bit definitions *********/
 #define RSYNCERREN		BIT(0)
 #define RFSREN			BIT(1)
 #define REOFEN			BIT(2)
 #define RRDYEN			BIT(3)
+#define RUNDFLEN		BIT(4)
+#define ROVFLEN			BIT(5)
 #define XSYNCERREN		BIT(7)
 #define XFSXEN			BIT(8)
 #define XEOFEN			BIT(9)
 #define XRDYEN			BIT(10)
+#define XUNDFLEN		BIT(11)
+#define XOVFLEN			BIT(12)
 #define XEMPTYEOFEN		BIT(14)
 
 /* Clock signal muxing options */
@@ -295,6 +298,7 @@ struct omap_mcbsp {
 	int configured;
 	u8 free;
 
+	int irq;
 	int rx_irq;
 	int tx_irq;
 

sound/soc/omap/omap-abe-twl6040.c

@@ -40,6 +40,11 @@
 #include "omap-pcm.h"
 #include "../codecs/twl6040.h"
 
+struct abe_twl6040 {
+	int	jack_detection;	/* board can detect jack events */
+	int	mclk_freq;	/* MCLK frequency speed for twl6040 */
+};
+
 static int omap_abe_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
@@ -47,13 +52,13 @@ static int omap_abe_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
 	struct snd_soc_codec *codec = rtd->codec;
 	struct snd_soc_card *card = codec->card;
-	struct omap_abe_twl6040_data *pdata = dev_get_platdata(card->dev);
+	struct abe_twl6040 *priv = snd_soc_card_get_drvdata(card);
 	int clk_id, freq;
 	int ret;
 
 	clk_id = twl6040_get_clk_id(rtd->codec);
 	if (clk_id == TWL6040_SYSCLK_SEL_HPPLL)
-		freq = pdata->mclk_freq;
+		freq = priv->mclk_freq;
 	else if (clk_id == TWL6040_SYSCLK_SEL_LPPLL)
 		freq = 32768;
 	else
@@ -128,6 +133,9 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 	SND_SOC_DAPM_MIC("Main Handset Mic", NULL),
 	SND_SOC_DAPM_MIC("Sub Handset Mic", NULL),
 	SND_SOC_DAPM_LINE("Line In", NULL),
+
+	/* Digital microphones */
+	SND_SOC_DAPM_MIC("Digital Mic", NULL),
 };
 
 static const struct snd_soc_dapm_route audio_map[] = {
@@ -173,6 +181,7 @@ static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd)
 	struct snd_soc_card *card = codec->card;
 	struct snd_soc_dapm_context *dapm = &codec->dapm;
 	struct omap_abe_twl6040_data *pdata = dev_get_platdata(card->dev);
+	struct abe_twl6040 *priv = snd_soc_card_get_drvdata(card);
 	int hs_trim;
 	int ret = 0;
 
@@ -196,7 +205,7 @@ static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd)
 					TWL6040_HSF_TRIM_RIGHT(hs_trim));
 
 	/* Headset jack detection only if it is supported */
-	if (pdata->jack_detection) {
+	if (priv->jack_detection) {
 		ret = snd_soc_jack_new(codec, "Headset Jack",
 					SND_JACK_HEADSET, &hs_jack);
 		if (ret)
@@ -210,10 +219,6 @@ static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd)
 	return ret;
 }
 
-static const struct snd_soc_dapm_widget dmic_dapm_widgets[] = {
-	SND_SOC_DAPM_MIC("Digital Mic", NULL),
-};
-
 static const struct snd_soc_dapm_route dmic_audio_map[] = {
 	{"DMic", NULL, "Digital Mic"},
 	{"Digital Mic", NULL, "Digital Mic1 Bias"},
@@ -223,19 +228,13 @@ static int omap_abe_dmic_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_codec *codec = rtd->codec;
 	struct snd_soc_dapm_context *dapm = &codec->dapm;
-	int ret;
-
-	ret = snd_soc_dapm_new_controls(dapm, dmic_dapm_widgets,
-				ARRAY_SIZE(dmic_dapm_widgets));
-	if (ret)
-		return ret;
 
 	return snd_soc_dapm_add_routes(dapm, dmic_audio_map,
 				ARRAY_SIZE(dmic_audio_map));
 }
 
 /* Digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link twl6040_dmic_dai[] = {
+static struct snd_soc_dai_link abe_twl6040_dai_links[] = {
 	{
 		.name = "TWL6040",
 		.stream_name = "TWL6040",
@@ -258,19 +257,6 @@ static struct snd_soc_dai_link twl6040_dmic_dai[] = {
 	},
 };
 
-static struct snd_soc_dai_link twl6040_only_dai[] = {
-	{
-		.name = "TWL6040",
-		.stream_name = "TWL6040",
-		.cpu_dai_name = "omap-mcpdm",
-		.codec_dai_name = "twl6040-legacy",
-		.platform_name = "omap-pcm-audio",
-		.codec_name = "twl6040-codec",
-		.init = omap_abe_twl6040_init,
-		.ops = &omap_abe_ops,
-	},
-};
-
 /* Audio machine driver */
 static struct snd_soc_card omap_abe_card = {
 	.owner = THIS_MODULE,
@@ -285,6 +271,8 @@ static __devinit int omap_abe_probe(struct platform_device *pdev)
 {
 	struct omap_abe_twl6040_data *pdata = dev_get_platdata(&pdev->dev);
 	struct snd_soc_card *card = &omap_abe_card;
+	struct abe_twl6040 *priv;
+	int num_links = 0;
 	int ret;
 
 	card->dev = &pdev->dev;
@@ -294,6 +282,10 @@ static __devinit int omap_abe_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct abe_twl6040), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
+
 	if (pdata->card_name) {
 		card->name = pdata->card_name;
 	} else {
@@ -301,18 +293,24 @@ static __devinit int omap_abe_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (!pdata->mclk_freq) {
+	priv->jack_detection = pdata->jack_detection;
+	priv->mclk_freq = pdata->mclk_freq;
+
+
+	if (!priv->mclk_freq) {
 		dev_err(&pdev->dev, "MCLK frequency missing\n");
 		return -ENODEV;
 	}
 
-	if (pdata->has_dmic) {
-		card->dai_link = twl6040_dmic_dai;
-		card->num_links = ARRAY_SIZE(twl6040_dmic_dai);
-	} else {
-		card->dai_link = twl6040_only_dai;
-		card->num_links = ARRAY_SIZE(twl6040_only_dai);
-	}
+	if (pdata->has_dmic)
+		num_links = 2;
+	else
+		num_links = 1;
+
+	card->dai_link = abe_twl6040_dai_links;
+	card->num_links = num_links;
+
+	snd_soc_card_set_drvdata(card, priv);
 
 	ret = snd_soc_register_card(card);
 	if (ret)

sound/soc/omap/omap-dmic.c

@@ -32,6 +32,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
+#include <linux/of_device.h>
 #include <plat/dma.h>
 
 #include <sound/core.h>
@@ -528,10 +529,17 @@ static int __devexit asoc_dmic_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id omap_dmic_of_match[] = {
+	{ .compatible = "ti,omap4-dmic", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, omap_dmic_of_match);
+
 static struct platform_driver asoc_dmic_driver = {
 	.driver = {
 		.name = "omap-dmic",
 		.owner = THIS_MODULE,
+		.of_match_table = omap_dmic_of_match,
 	},
 	.probe = asoc_dmic_probe,
 	.remove = __devexit_p(asoc_dmic_remove),

sound/soc/omap/omap4-hdmi-card.c → sound/soc/omap/omap-hdmi-card.c

 /*
- * omap4-hdmi-card.c
+ * omap-hdmi-card.c
  *
- * OMAP ALSA SoC machine driver for TI OMAP4 HDMI
+ * OMAP ALSA SoC machine driver for TI OMAP HDMI
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  * Author: Ricardo Neri <ricardo.neri@ti.com>
  *
@@ -27,61 +27,27 @@
 #include <asm/mach-types.h>
 #include <video/omapdss.h>
 
-#define DRV_NAME "omap4-hdmi-audio"
+#define DRV_NAME "omap-hdmi-audio"
 
-static int omap4_hdmi_dai_hw_params(struct snd_pcm_substream *substream,
-		struct snd_pcm_hw_params *params)
-{
-	int i;
-	struct omap_overlay_manager *mgr = NULL;
-	struct device *dev = substream->pcm->card->dev;
-
-	/* Find DSS HDMI device */
-	for (i = 0; i < omap_dss_get_num_overlay_managers(); i++) {
-		mgr = omap_dss_get_overlay_manager(i);
-		if (mgr && mgr->device
-			&& mgr->device->type == OMAP_DISPLAY_TYPE_HDMI)
-			break;
-	}
-
-	if (i == omap_dss_get_num_overlay_managers()) {
-		dev_err(dev, "HDMI display device not found!\n");
-		return -ENODEV;
-	}
-
-	/* Make sure HDMI is power-on to avoid L3 interconnect errors */
-	if (mgr->device->state != OMAP_DSS_DISPLAY_ACTIVE) {
-		dev_err(dev, "HDMI display is not active!\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static struct snd_soc_ops omap4_hdmi_dai_ops = {
-	.hw_params = omap4_hdmi_dai_hw_params,
-};
-
-static struct snd_soc_dai_link omap4_hdmi_dai = {
+static struct snd_soc_dai_link omap_hdmi_dai = {
 	.name = "HDMI",
 	.stream_name = "HDMI",
-	.cpu_dai_name = "hdmi-audio-dai",
+	.cpu_dai_name = "omap-hdmi-audio-dai",
 	.platform_name = "omap-pcm-audio",
-	.codec_name = "omapdss_hdmi",
-	.codec_dai_name = "hdmi-audio-codec",
-	.ops = &omap4_hdmi_dai_ops,
+	.codec_name = "hdmi-audio-codec",
+	.codec_dai_name = "omap-hdmi-hifi",
 };
 
-static struct snd_soc_card snd_soc_omap4_hdmi = {
-	.name = "OMAP4HDMI",
+static struct snd_soc_card snd_soc_omap_hdmi = {
+	.name = "OMAPHDMI",
 	.owner = THIS_MODULE,
-	.dai_link = &omap4_hdmi_dai,
+	.dai_link = &omap_hdmi_dai,
 	.num_links = 1,
 };
 
-static __devinit int omap4_hdmi_probe(struct platform_device *pdev)
+static __devinit int omap_hdmi_probe(struct platform_device *pdev)
 {
-	struct snd_soc_card *card = &snd_soc_omap4_hdmi;
+	struct snd_soc_card *card = &snd_soc_omap_hdmi;
 	int ret;
 
 	card->dev = &pdev->dev;
@@ -95,7 +61,7 @@ static __devinit int omap4_hdmi_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit omap4_hdmi_remove(struct platform_device *pdev)
+static int __devexit omap_hdmi_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);
 
@@ -104,18 +70,18 @@ static int __devexit omap4_hdmi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver omap4_hdmi_driver = {
+static struct platform_driver omap_hdmi_driver = {
 	.driver = {
-		.name = "omap4-hdmi-audio",
+		.name = DRV_NAME,
 		.owner = THIS_MODULE,
 	},
-	.probe = omap4_hdmi_probe,
-	.remove = __devexit_p(omap4_hdmi_remove),
+	.probe = omap_hdmi_probe,
+	.remove = __devexit_p(omap_hdmi_remove),
 };
 
-module_platform_driver(omap4_hdmi_driver);
+module_platform_driver(omap_hdmi_driver);
 
 MODULE_AUTHOR("Ricardo Neri <ricardo.neri@ti.com>");
-MODULE_DESCRIPTION("OMAP4 HDMI machine ASoC driver");
+MODULE_DESCRIPTION("OMAP HDMI machine ASoC driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DRV_NAME);

sound/soc/omap/omap-hdmi.c

@@ -30,21 +30,28 @@
 #include <sound/pcm_params.h>
 #include <sound/initval.h>
 #include <sound/soc.h>
+#include <sound/asound.h>
+#include <sound/asoundef.h>
+#include <video/omapdss.h>
 
 #include <plat/dma.h>
 #include "omap-pcm.h"
 #include "omap-hdmi.h"
 
-#define DRV_NAME "hdmi-audio-dai"
+#define DRV_NAME "omap-hdmi-audio-dai"
 
-static struct omap_pcm_dma_data omap_hdmi_dai_dma_params = {
-	.name = "HDMI playback",
-	.sync_mode = OMAP_DMA_SYNC_PACKET,
+struct hdmi_priv {
+	struct omap_pcm_dma_data dma_params;
+	struct omap_dss_audio dss_audio;
+	struct snd_aes_iec958 iec;
+	struct snd_cea_861_aud_if cea;
+	struct omap_dss_device *dssdev;
 };
 
 static int omap_hdmi_dai_startup(struct snd_pcm_substream *substream,
 				  struct snd_soc_dai *dai)
 {
+	struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
 	int err;
 	/*
 	 * Make sure that the period bytes are multiple of the DMA packet size.
@@ -52,46 +59,201 @@ static int omap_hdmi_dai_startup(struct snd_pcm_substream *substream,
 	 */
 	err = snd_pcm_hw_constraint_step(substream->runtime, 0,
 				 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 128);
-	if (err < 0)
+	if (err < 0) {
+		dev_err(dai->dev, "could not apply constraint\n");
 		return err;
+	}
 
+	if (!priv->dssdev->driver->audio_supported(priv->dssdev)) {
+		dev_err(dai->dev, "audio not supported\n");
+		return -ENODEV;
+	}
 	return 0;
 }
 
+static int omap_hdmi_dai_prepare(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
+
+	return priv->dssdev->driver->audio_enable(priv->dssdev);
+}
+
 static int omap_hdmi_dai_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *params,
 				    struct snd_soc_dai *dai)
 {
+	struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
+	struct snd_aes_iec958 *iec = &priv->iec;
+	struct snd_cea_861_aud_if *cea = &priv->cea;
 	int err = 0;
 
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
-		omap_hdmi_dai_dma_params.packet_size = 16;
+		priv->dma_params.packet_size = 16;
 		break;
 	case SNDRV_PCM_FORMAT_S24_LE:
-		omap_hdmi_dai_dma_params.packet_size = 32;
+		priv->dma_params.packet_size = 32;
 		break;
 	default:
-		err = -EINVAL;
+		dev_err(dai->dev, "format not supported!\n");
+		return -EINVAL;
 	}
 
-	omap_hdmi_dai_dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
+	priv->dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
 
 	snd_soc_dai_set_dma_data(dai, substream,
-				 &omap_hdmi_dai_dma_params);
+				 &priv->dma_params);
+
+	/*
+	 * fill the IEC-60958 channel status word
+	 */
+
+	/* specify IEC-60958-3 (commercial use) */
+	iec->status[0] &= ~IEC958_AES0_PROFESSIONAL;
+
+	/* specify that the audio is LPCM*/
+	iec->status[0] &= ~IEC958_AES0_NONAUDIO;
+
+	iec->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+
+	iec->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE;
+
+	iec->status[0] |= IEC958_AES1_PRO_MODE_NOTID;
+
+	iec->status[1] = IEC958_AES1_CON_GENERAL;
+
+	iec->status[2] |= IEC958_AES2_CON_SOURCE_UNSPEC;
+
+	iec->status[2] |= IEC958_AES2_CON_CHANNEL_UNSPEC;
+
+	switch (params_rate(params)) {
+	case 32000:
+		iec->status[3] |= IEC958_AES3_CON_FS_32000;
+		break;
+	case 44100:
+		iec->status[3] |= IEC958_AES3_CON_FS_44100;
+		break;
+	case 48000:
+		iec->status[3] |= IEC958_AES3_CON_FS_48000;
+		break;
+	case 88200:
+		iec->status[3] |= IEC958_AES3_CON_FS_88200;
+		break;
+	case 96000:
+		iec->status[3] |= IEC958_AES3_CON_FS_96000;
+		break;
+	case 176400:
+		iec->status[3] |= IEC958_AES3_CON_FS_176400;
+		break;
+	case 192000:
+		iec->status[3] |= IEC958_AES3_CON_FS_192000;
+		break;
+	default:
+		dev_err(dai->dev, "rate not supported!\n");
+		return -EINVAL;
+	}
+
+	/* specify the clock accuracy */
+	iec->status[3] |= IEC958_AES3_CON_CLOCK_1000PPM;
+
+	/*
+	 * specify the word length. The same word length value can mean
+	 * two different lengths. Hence, we need to specify the maximum
+	 * word length as well.
+	 */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		iec->status[4] |= IEC958_AES4_CON_WORDLEN_20_16;
+		iec->status[4] &= ~IEC958_AES4_CON_MAX_WORDLEN_24;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iec->status[4] |= IEC958_AES4_CON_WORDLEN_24_20;
+		iec->status[4] |= IEC958_AES4_CON_MAX_WORDLEN_24;
+		break;
+	default:
+		dev_err(dai->dev, "format not supported!\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Fill the CEA-861 audio infoframe (see spec for details)
+	 */
+
+	cea->db1_ct_cc = (params_channels(params) - 1)
+		& CEA861_AUDIO_INFOFRAME_DB1CC;
+	cea->db1_ct_cc |= CEA861_AUDIO_INFOFRAME_DB1CT_FROM_STREAM;
+
+	cea->db2_sf_ss = CEA861_AUDIO_INFOFRAME_DB2SF_FROM_STREAM;
+	cea->db2_sf_ss |= CEA861_AUDIO_INFOFRAME_DB2SS_FROM_STREAM;
+
+	cea->db3 = 0; /* not used, all zeros */
+
+	/*
+	 * The OMAP HDMI IP requires to use the 8-channel channel code when
+	 * transmitting more than two channels.
+	 */
+	if (params_channels(params) == 2)
+		cea->db4_ca = 0x0;
+	else
+		cea->db4_ca = 0x13;
+
+	cea->db5_dminh_lsv = CEA861_AUDIO_INFOFRAME_DB5_DM_INH_PROHIBITED;
+	/* the expression is trivial but makes clear what we are doing */
+	cea->db5_dminh_lsv |= (0 & CEA861_AUDIO_INFOFRAME_DB5_LSV);
+
+	priv->dss_audio.iec = iec;
+	priv->dss_audio.cea = cea;
+
+	err = priv->dssdev->driver->audio_config(priv->dssdev,
+						 &priv->dss_audio);
 
 	return err;
 }
 
+static int omap_hdmi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+				struct snd_soc_dai *dai)
+{
+	struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
+	int err = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		err = priv->dssdev->driver->audio_start(priv->dssdev);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		priv->dssdev->driver->audio_stop(priv->dssdev);
+		break;
+	default:
+		err = -EINVAL;
+	}
+	return err;
+}
+
+static void omap_hdmi_dai_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
+
+	priv->dssdev->driver->audio_disable(priv->dssdev);
+}
+
 static const struct snd_soc_dai_ops omap_hdmi_dai_ops = {
 	.startup	= omap_hdmi_dai_startup,
 	.hw_params	= omap_hdmi_dai_hw_params,
+	.prepare	= omap_hdmi_dai_prepare,
+	.trigger	= omap_hdmi_dai_trigger,
+	.shutdown	= omap_hdmi_dai_shutdown,
 };
 
 static struct snd_soc_dai_driver omap_hdmi_dai = {
 	.playback = {
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 8,
 		.rates = OMAP_HDMI_RATES,
 		.formats = OMAP_HDMI_FORMATS,
 	},
@@ -102,31 +264,77 @@ static __devinit int omap_hdmi_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct resource *hdmi_rsrc;
+	struct hdmi_priv *hdmi_data;
+	bool hdmi_dev_found = false;
+
+	hdmi_data = devm_kzalloc(&pdev->dev, sizeof(*hdmi_data), GFP_KERNEL);
+	if (hdmi_data == NULL) {
+		dev_err(&pdev->dev, "Cannot allocate memory for HDMI data\n");
+		return -ENOMEM;
+	}
 
 	hdmi_rsrc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!hdmi_rsrc) {
 		dev_err(&pdev->dev, "Cannot obtain IORESOURCE_MEM HDMI\n");
-		return -EINVAL;
+		return -ENODEV;
 	}
 
-	omap_hdmi_dai_dma_params.port_addr =  hdmi_rsrc->start
+	hdmi_data->dma_params.port_addr =  hdmi_rsrc->start
 		+ OMAP_HDMI_AUDIO_DMA_PORT;
 
 	hdmi_rsrc = platform_get_resource(pdev, IORESOURCE_DMA, 0);
 	if (!hdmi_rsrc) {
 		dev_err(&pdev->dev, "Cannot obtain IORESOURCE_DMA HDMI\n");
-		return -EINVAL;
+		return -ENODEV;
 	}
 
-	omap_hdmi_dai_dma_params.dma_req =  hdmi_rsrc->start;
+	hdmi_data->dma_params.dma_req =  hdmi_rsrc->start;
+	hdmi_data->dma_params.name = "HDMI playback";
+	hdmi_data->dma_params.sync_mode = OMAP_DMA_SYNC_PACKET;
+
+	/*
+	 * TODO: We assume that there is only one DSS HDMI device. Future
+	 * OMAP implementations may support more than one HDMI devices and
+	 * we should provided separate audio support for all of them.
+	 */
+	/* Find an HDMI device. */
+	for_each_dss_dev(hdmi_data->dssdev) {
+		omap_dss_get_device(hdmi_data->dssdev);
 
+		if (!hdmi_data->dssdev->driver) {
+			omap_dss_put_device(hdmi_data->dssdev);
+			continue;
+		}
+
+		if (hdmi_data->dssdev->type == OMAP_DISPLAY_TYPE_HDMI) {
+			hdmi_dev_found = true;
+			break;
+		}
+	}
+
+	if (!hdmi_dev_found) {
+		dev_err(&pdev->dev, "no driver for HDMI display found\n");
+		return -ENODEV;
+	}
+
+	dev_set_drvdata(&pdev->dev, hdmi_data);
 	ret = snd_soc_register_dai(&pdev->dev, &omap_hdmi_dai);
+
 	return ret;
 }
 
 static int __devexit omap_hdmi_remove(struct platform_device *pdev)
 {
+	struct hdmi_priv *hdmi_data = dev_get_drvdata(&pdev->dev);
+
 	snd_soc_unregister_dai(&pdev->dev);
+
+	if (hdmi_data == NULL) {
+		dev_err(&pdev->dev, "cannot obtain HDMi data\n");
+		return -ENODEV;
+	}
+
+	omap_dss_put_device(hdmi_data->dssdev);
 	return 0;
 }
 

sound/soc/omap/omap-hdmi.h

@@ -28,7 +28,9 @@
 #define OMAP_HDMI_AUDIO_DMA_PORT 0x8c
 
 #define OMAP_HDMI_RATES	(SNDRV_PCM_RATE_32000 | \
-				SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
+				SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \
+				SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
+				SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
 
 #define OMAP_HDMI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
 				SNDRV_PCM_FMTBIT_S24_LE)

sound/soc/omap/omap-mcbsp.c

@@ -71,18 +71,17 @@ static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream)
 
 	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
-	/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
-	if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
-		/*
-		 * Configure McBSP threshold based on either:
-		 * packet_size, when the sDMA is in packet mode, or
-		 * based on the period size.
-		 */
-		if (dma_data->packet_size)
-			words = dma_data->packet_size;
-		else
-			words = snd_pcm_lib_period_bytes(substream) /
-							(mcbsp->wlen / 8);
+	/*
+	 * Configure McBSP threshold based on either:
+	 * packet_size, when the sDMA is in packet mode, or based on the
+	 * period size in THRESHOLD mode, otherwise use McBSP threshold = 1
+	 * for mono streams.
+	 */
+	if (dma_data->packet_size)
+		words = dma_data->packet_size;
+	else if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
+		words = snd_pcm_lib_period_bytes(substream) /
+						(mcbsp->wlen / 8);
 	else
 		words = 1;
 
@@ -139,13 +138,15 @@ static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
 	if (mcbsp->pdata->buffer_size) {
 		/*
 		* Rule for the buffer size. We should not allow
-		* smaller buffer than the FIFO size to avoid underruns
+		* smaller buffer than the FIFO size to avoid underruns.
+		* This applies only for the playback stream.
 		*/
-		snd_pcm_hw_rule_add(substream->runtime, 0,
-				    SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
-				    omap_mcbsp_hwrule_min_buffersize,
-				    mcbsp,
-				    SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			snd_pcm_hw_rule_add(substream->runtime, 0,
+					    SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+					    omap_mcbsp_hwrule_min_buffersize,
+					    mcbsp,
+					    SNDRV_PCM_HW_PARAM_CHANNELS, -1);
 
 		/* Make sure, that the period size is always even */
 		snd_pcm_hw_constraint_step(substream->runtime, 0,
@@ -230,6 +231,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	unsigned int format, div, framesize, master;
 
 	dma_data = &mcbsp->dma_data[substream->stream];
+	channels = params_channels(params);
 
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
@@ -245,7 +247,6 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	}
 	if (mcbsp->pdata->buffer_size) {
 		dma_data->set_threshold = omap_mcbsp_set_threshold;
-		/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
 		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
 			int period_words, max_thrsh;
 
@@ -283,6 +284,10 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 			} else {
 				sync_mode = OMAP_DMA_SYNC_FRAME;
 			}
+		} else if (channels > 1) {
+			/* Use packet mode for non mono streams */
+			pkt_size = channels;
+			sync_mode = OMAP_DMA_SYNC_PACKET;
 		}
 	}
 
@@ -301,7 +306,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	regs->rcr1	&= ~(RFRLEN1(0x7f) | RWDLEN1(7));
 	regs->xcr1	&= ~(XFRLEN1(0x7f) | XWDLEN1(7));
 	format = mcbsp->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
-	wpf = channels = params_channels(params);
+	wpf = channels;
 	if (channels == 2 && (format == SND_SOC_DAIFMT_I2S ||
 			      format == SND_SOC_DAIFMT_LEFT_J)) {
 		/* Use dual-phase frames */

sound/soc/omap/omap-mcpdm.c

@@ -33,6 +33,7 @@
 #include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
+#include <linux/of_device.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -507,10 +508,17 @@ static int __devexit asoc_mcpdm_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id omap_mcpdm_of_match[] = {
+	{ .compatible = "ti,omap4-mcpdm", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, omap_mcpdm_of_match);
+
 static struct platform_driver asoc_mcpdm_driver = {
 	.driver = {
 		.name	= "omap-mcpdm",
 		.owner	= THIS_MODULE,
+		.of_match_table = omap_mcpdm_of_match,
 	},
 
 	.probe	= asoc_mcpdm_probe,