rtl8xxxu: Reorg more code to match the flow of the 8192eu vendor driver

This further reorganizes the init code flow to match that of the
8192eu vendor driver. This helps diffing the register write log
against that of the vendor driver.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c

@@ -7468,34 +7468,39 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		goto exit;
 	}
 
-	dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
 	if (!macpower) {
-		ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM);
-		if (ret) {
-			dev_warn(dev, "%s: LLT table init failed\n", __func__);
-			goto exit;
-		}
+		if (priv->ep_tx_normal_queue)
+			val8 = TX_PAGE_NUM_NORM_PQ;
+		else
+			val8 = 0;
 
-		/*
-		 * Presumably this is for 8188EU as well
-		 * Enable TX report and TX report timer
-		 */
-		if (priv->rtl_chip == RTL8723B) {
-			val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
-			val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
-			rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
-			/* Set MAX RPT MACID */
-			rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02);
-			/* TX report Timer. Unit: 32us */
-			rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0);
+		rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8);
 
-			/* tmp ps ? */
-			val8 = rtl8xxxu_read8(priv, 0xa3);
-			val8 &= 0xf8;
-			rtl8xxxu_write8(priv, 0xa3, val8);
-		}
+		val32 = (TX_PAGE_NUM_PUBQ << RQPN_NORM_PQ_SHIFT) | RQPN_LOAD;
+
+		if (priv->ep_tx_high_queue)
+			val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT);
+		if (priv->ep_tx_low_queue)
+			val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT);
+
+		rtl8xxxu_write32(priv, REG_RQPN, val32);
 	}
 
+	ret = rtl8xxxu_init_queue_priority(priv);
+	dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret);
+	if (ret)
+		goto exit;
+
+	/*
+	 * Set RX page boundary
+	 */
+	if (priv->rtl_chip == RTL8723B)
+		rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3f7f);
+	else if (priv->rtl_chip == RTL8192E)
+		rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3cff);
+	else
+		rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x27ff);
+
 	ret = rtl8xxxu_download_firmware(priv);
 	dev_dbg(dev, "%s: download_fiwmare %i\n", __func__, ret);
 	if (ret)
@@ -7634,22 +7639,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	}
 
 	if (!macpower) {
-		if (priv->ep_tx_normal_queue)
-			val8 = TX_PAGE_NUM_NORM_PQ;
-		else
-			val8 = 0;
-
-		rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8);
-
-		val32 = (TX_PAGE_NUM_PUBQ << RQPN_NORM_PQ_SHIFT) | RQPN_LOAD;
-
-		if (priv->ep_tx_high_queue)
-			val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT);
-		if (priv->ep_tx_low_queue)
-			val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT);
-
-		rtl8xxxu_write32(priv, REG_RQPN, val32);
-
 		/*
 		 * Set TX buffer boundary
 		 */
@@ -7668,20 +7657,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8);
 	}
 
-	ret = rtl8xxxu_init_queue_priority(priv);
-	dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret);
-	if (ret)
-		goto exit;
-
-	/*
-	 * Set RX page boundary
-	 */
-	if (priv->rtl_chip == RTL8723B)
-		rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3f7f);
-	else if (priv->rtl_chip == RTL8192E)
-		rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3cff);
-	else
-		rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x27ff);
 	/*
 	 * Transfer page size is always 128
 	 */
@@ -7693,6 +7668,34 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 			(PBP_PAGE_SIZE_128 << PBP_PAGE_SIZE_TX_SHIFT);
 	rtl8xxxu_write8(priv, REG_PBP, val8);
 
+	dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
+	if (!macpower) {
+		ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM);
+		if (ret) {
+			dev_warn(dev, "%s: LLT table init failed\n", __func__);
+			goto exit;
+		}
+
+		/*
+		 * Presumably this is for 8188EU as well
+		 * Enable TX report and TX report timer
+		 */
+		if (priv->rtl_chip == RTL8723B) {
+			val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+			val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
+			rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+			/* Set MAX RPT MACID */
+			rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02);
+			/* TX report Timer. Unit: 32us */
+			rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0);
+
+			/* tmp ps ? */
+			val8 = rtl8xxxu_read8(priv, 0xa3);
+			val8 &= 0xf8;
+			rtl8xxxu_write8(priv, 0xa3, val8);
+		}
+	}
+
 	/*
 	 * Unit in 8 bytes, not obvious what it is used for
 	 */