Merge tag 'iio-fixes-for-4.6b' of...

Merge tag 'iio-fixes-for-4.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 4.6 cycle.

This lot are either dependent on patches from the merge window or just came
in recently enough that they ended up in this tree.

* core
  - The watermark for the buffers was given a value that meant that it was
    impossible to actually set the watermark to anything sensible.
* at91_adc
  - Fix a build config dependency on HAS_IOMEM
* bmc150
  - Fix wrong output on big endian systems
* bmg160
  - Fix wrong output on big endian systems
  - Fix an issue in which the regmap return value was stored to the buffer
    rather than the value actually being read in a bulk read.
* inv_mpu6050
  - Fix an indirect build config dependency on HAS_IOMEM
* max30100
  - Fix an error in fifo check condition that leads to a double read of the
    final reading.
* st_magn
  - Make sure ST_MAGN_TRIGGER_SET_STATE is always defined to avoid a build
    error for relatively obscure config combinations.

drivers/iio/accel/bmc150-accel-core.c

@@ -547,7 +547,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data,
 {
 	int ret;
 	int axis = chan->scan_index;
-	unsigned int raw_val;
+	__le16 raw_val;
 
 	mutex_lock(&data->mutex);
 	ret = bmc150_accel_set_power_state(data, true);
@@ -557,14 +557,14 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data,
 	}
 
 	ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_AXIS_TO_REG(axis),
-			       &raw_val, 2);
+			       &raw_val, sizeof(raw_val));
 	if (ret < 0) {
 		dev_err(data->dev, "Error reading axis %d\n", axis);
 		bmc150_accel_set_power_state(data, false);
 		mutex_unlock(&data->mutex);
 		return ret;
 	}
-	*val = sign_extend32(raw_val >> chan->scan_type.shift,
+	*val = sign_extend32(le16_to_cpu(raw_val) >> chan->scan_type.shift,
 			     chan->scan_type.realbits - 1);
 	ret = bmc150_accel_set_power_state(data, false);
 	mutex_unlock(&data->mutex);
@@ -988,6 +988,7 @@ static const struct iio_event_spec bmc150_accel_event = {
 		.realbits = (bits),					\
 		.storagebits = 16,					\
 		.shift = 16 - (bits),					\
+		.endianness = IIO_LE,					\
 	},								\
 	.event_spec = &bmc150_accel_event,				\
 	.num_event_specs = 1						\

drivers/iio/adc/Kconfig

@@ -134,6 +134,7 @@ config AT91_ADC
 config AT91_SAMA5D2_ADC
 	tristate "Atmel AT91 SAMA5D2 ADC"
 	depends on ARCH_AT91 || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Say yes here to build support for Atmel SAMA5D2 ADC which is
 	  available on SAMA5D2 SoC family.

drivers/iio/gyro/bmg160_core.c

@@ -452,7 +452,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
 static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
 {
 	int ret;
-	unsigned int raw_val;
+	__le16 raw_val;
 
 	mutex_lock(&data->mutex);
 	ret = bmg160_set_power_state(data, true);
@@ -462,7 +462,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
 	}
 
 	ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
-			       2);
+			       sizeof(raw_val));
 	if (ret < 0) {
 		dev_err(data->dev, "Error reading axis %d\n", axis);
 		bmg160_set_power_state(data, false);
@@ -470,7 +470,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
 		return ret;
 	}
 
-	*val = sign_extend32(raw_val, 15);
+	*val = sign_extend32(le16_to_cpu(raw_val), 15);
 	ret = bmg160_set_power_state(data, false);
 	mutex_unlock(&data->mutex);
 	if (ret < 0)
@@ -733,6 +733,7 @@ static const struct iio_event_spec bmg160_event = {
 		.sign = 's',						\
 		.realbits = 16,					\
 		.storagebits = 16,					\
+		.endianness = IIO_LE,					\
 	},								\
 	.event_spec = &bmg160_event,					\
 	.num_event_specs = 1						\
@@ -780,7 +781,7 @@ static irqreturn_t bmg160_trigger_handler(int irq, void *p)
 			mutex_unlock(&data->mutex);
 			goto err;
 		}
-		data->buffer[i++] = ret;
+		data->buffer[i++] = val;
 	}
 	mutex_unlock(&data->mutex);
 

drivers/iio/health/max30100.c

@@ -238,12 +238,13 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private)
 
 	mutex_lock(&data->lock);
 
-	while (cnt-- || (cnt = max30100_fifo_count(data) > 0)) {
+	while (cnt || (cnt = max30100_fifo_count(data) > 0)) {
 		ret = max30100_read_measurement(data);
 		if (ret)
 			break;
 
 		iio_push_to_buffers(data->indio_dev, data->buffer);
+		cnt--;
 	}
 
 	mutex_unlock(&data->lock);

drivers/iio/imu/inv_mpu6050/Kconfig

@@ -9,9 +9,8 @@ config INV_MPU6050_IIO
 
 config INV_MPU6050_I2C
 	tristate "Invensense MPU6050 devices (I2C)"
-	depends on I2C
+	depends on I2C_MUX
 	select INV_MPU6050_IIO
-	select I2C_MUX
 	select REGMAP_I2C
 	help
 	  This driver supports the Invensense MPU6050 devices.

drivers/iio/industrialio-buffer.c

@@ -653,6 +653,7 @@ static int iio_verify_update(struct iio_dev *indio_dev,
 	unsigned int modes;
 
 	memset(config, 0, sizeof(*config));
+	config->watermark = ~0;
 
 	/*
 	 * If there is just one buffer and we are removing it there is nothing

drivers/iio/magnetometer/st_magn.h

@@ -44,6 +44,7 @@ static inline int st_magn_allocate_ring(struct iio_dev *indio_dev)
 static inline void st_magn_deallocate_ring(struct iio_dev *indio_dev)
 {
 }
+#define ST_MAGN_TRIGGER_SET_STATE NULL
 #endif /* CONFIG_IIO_BUFFER */
 
 #endif /* ST_MAGN_H */