Commit 5ace6085 authored by Jean Delvare's avatar Jean Delvare Committed by Wolfram Sang

i2c: smbus: Add a way to instantiate SPD EEPROMs automatically

In simple cases we can instantiate SPD EEPROMs on the SMBus
automatically. Start with just DDR2, DDR3 and DDR4 on x86 for now,
and only for systems with no more than 4 memory slots. These
limitations may be lifted later.
Signed-off-by: default avatarJean Delvare <jdelvare@suse.de>
[wsa: minor change for new API]
Signed-off-by: default avatarWolfram Sang <wsa@kernel.org>
parent 7df915e5
...@@ -3,10 +3,11 @@ ...@@ -3,10 +3,11 @@
* i2c-smbus.c - SMBus extensions to the I2C protocol * i2c-smbus.c - SMBus extensions to the I2C protocol
* *
* Copyright (C) 2008 David Brownell * Copyright (C) 2008 David Brownell
* Copyright (C) 2010 Jean Delvare <jdelvare@suse.de> * Copyright (C) 2010-2019 Jean Delvare <jdelvare@suse.de>
*/ */
#include <linux/device.h> #include <linux/device.h>
#include <linux/dmi.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/i2c-smbus.h> #include <linux/i2c-smbus.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
...@@ -196,6 +197,107 @@ EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert); ...@@ -196,6 +197,107 @@ EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert);
module_i2c_driver(smbalert_driver); module_i2c_driver(smbalert_driver);
/*
* SPD is not part of SMBus but we include it here for convenience as the
* target systems are the same.
* Restrictions to automatic SPD instantiation:
* - Only works if all filled slots have the same memory type
* - Only works for DDR2, DDR3 and DDR4 for now
* - Only works on systems with 1 to 4 memory slots
*/
#if IS_ENABLED(CONFIG_DMI)
void i2c_register_spd(struct i2c_adapter *adap)
{
int n, slot_count = 0, dimm_count = 0;
u16 handle;
u8 common_mem_type = 0x0, mem_type;
u64 mem_size;
const char *name;
while ((handle = dmi_memdev_handle(slot_count)) != 0xffff) {
slot_count++;
/* Skip empty slots */
mem_size = dmi_memdev_size(handle);
if (!mem_size)
continue;
/* Skip undefined memory type */
mem_type = dmi_memdev_type(handle);
if (mem_type <= 0x02) /* Invalid, Other, Unknown */
continue;
if (!common_mem_type) {
/* First filled slot */
common_mem_type = mem_type;
} else {
/* Check that all filled slots have the same type */
if (mem_type != common_mem_type) {
dev_warn(&adap->dev,
"Different memory types mixed, not instantiating SPD\n");
return;
}
}
dimm_count++;
}
/* No useful DMI data, bail out */
if (!dimm_count)
return;
dev_info(&adap->dev, "%d/%d memory slots populated (from DMI)\n",
dimm_count, slot_count);
if (slot_count > 4) {
dev_warn(&adap->dev,
"Systems with more than 4 memory slots not supported yet, not instantiating SPD\n");
return;
}
switch (common_mem_type) {
case 0x13: /* DDR2 */
case 0x18: /* DDR3 */
case 0x1C: /* LPDDR2 */
case 0x1D: /* LPDDR3 */
name = "spd";
break;
case 0x1A: /* DDR4 */
case 0x1E: /* LPDDR4 */
name = "ee1004";
break;
default:
dev_info(&adap->dev,
"Memory type 0x%02x not supported yet, not instantiating SPD\n",
common_mem_type);
return;
}
/*
* We don't know in which slots the memory modules are. We could
* try to guess from the slot names, but that would be rather complex
* and unreliable, so better probe all possible addresses until we
* have found all memory modules.
*/
for (n = 0; n < slot_count && dimm_count; n++) {
struct i2c_board_info info;
unsigned short addr_list[2];
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, name, I2C_NAME_SIZE);
addr_list[0] = 0x50 + n;
addr_list[1] = I2C_CLIENT_END;
if (!IS_ERR(i2c_new_scanned_device(adap, &info, addr_list, NULL))) {
dev_info(&adap->dev,
"Successfully instantiated SPD at 0x%hx\n",
addr_list[0]);
dimm_count--;
}
}
}
EXPORT_SYMBOL_GPL(i2c_register_spd);
#endif
MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("SMBus protocol extensions support"); MODULE_DESCRIPTION("SMBus protocol extensions support");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
/* /*
* i2c-smbus.h - SMBus extensions to the I2C protocol * i2c-smbus.h - SMBus extensions to the I2C protocol
* *
* Copyright (C) 2010 Jean Delvare <jdelvare@suse.de> * Copyright (C) 2010-2019 Jean Delvare <jdelvare@suse.de>
*/ */
#ifndef _LINUX_I2C_SMBUS_H #ifndef _LINUX_I2C_SMBUS_H
...@@ -39,4 +39,10 @@ static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap) ...@@ -39,4 +39,10 @@ static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap)
} }
#endif #endif
#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_DMI)
void i2c_register_spd(struct i2c_adapter *adap);
#else
static inline void i2c_register_spd(struct i2c_adapter *adap) { }
#endif
#endif /* _LINUX_I2C_SMBUS_H */ #endif /* _LINUX_I2C_SMBUS_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment