ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file

Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

arch/arm/boot/dts/Makefile

@@ -762,6 +762,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk01.1-c1.dtb \
 	qcom-ipq4019-ap.dk04.1-c1.dtb \
 	qcom-ipq4019-ap.dk04.1-c3.dtb \
+	qcom-ipq4019-ap.dk07.1-c1.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \

arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts

+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
+	compatible = "qcom,ipq4019-ap-dk07.1-c1";
+
+	soc {
+		pci@40000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 38 0x1>;
+		};
+
+		spi@78b6000 {
+			status = "ok";
+		};
+
+		pinctrl@1000000 {
+			serial_1_pins: serial1-pinmux {
+				pins = "gpio8", "gpio9",
+					"gpio10", "gpio11";
+				function = "blsp_uart1";
+				bias-disable;
+			};
+
+			spi_0_pins: spi-0-pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi@78b5000 {
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 12 0>;
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				spi-max-frequency = <24000000>;
+			};
+		};
+	};
+};