pwm: iqs620a: Use 64-bit division

The PWM framework is going to change the PWM period and duty cycles to
be 64-bit unsigned integers. To avoid build errors on platforms that do
not natively support 64-bit division, use explicity 64-bit division.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

drivers/pwm/pwm-iqs620a.c

@@ -46,7 +46,8 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 {
 	struct iqs620_pwm_private *iqs620_pwm;
 	struct iqs62x_core *iqs62x;
-	int duty_scale, ret;
+	u64 duty_scale;
+	int ret;
 
 	if (state->polarity != PWM_POLARITY_NORMAL)
 		return -ENOTSUPP;
@@ -69,7 +70,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * For lower duty cycles (e.g. 0), the PWM output is simply disabled to
 	 * allow an external pull-down resistor to hold the GPIO3/LTX pin low.
 	 */
-	duty_scale = state->duty_cycle * 256 / IQS620_PWM_PERIOD_NS;
+	duty_scale = div_u64(state->duty_cycle * 256, IQS620_PWM_PERIOD_NS);
 
 	mutex_lock(&iqs620_pwm->lock);
 
@@ -81,7 +82,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	}
 
 	if (duty_scale) {
-		u8 duty_val = min(duty_scale - 1, 0xFF);
+		u8 duty_val = min_t(u64, duty_scale - 1, 0xff);
 
 		ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE,
 				   duty_val);