ARM: imx: add initial support for VF610

Add initial support for Freescale Vybrid VF610 SoC.
Signed-off-by: Jingchang Lu <b35083@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/mach-imx/Kconfig

@@ -835,6 +835,21 @@ config SOC_IMX6SL
 	help
 	  This enables support for Freescale i.MX6 SoloLite processor.
 
+config SOC_VF610
+	bool "Vybrid Family VF610 support"
+	select CPU_V7
+	select ARM_GIC
+	select CLKSRC_OF
+	select PINCTRL
+	select PINCTRL_VF610
+	select VF_PIT_TIMER
+	select PL310_ERRATA_588369 if CACHE_PL310
+	select PL310_ERRATA_727915 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+
+	help
+	  This enable support for Freescale Vybrid VF610 processor.
+
 endif
 
 source "arch/arm/mach-imx/devices/Kconfig"

arch/arm/mach-imx/Makefile

@@ -112,4 +112,6 @@ obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
 
+obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
+
 obj-y += devices/

arch/arm/mach-imx/mach-vf610.c

+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/clk-provider.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "common.h"
+
+static void __init vf610_init_machine(void)
+{
+	mxc_arch_reset_init_dt();
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void __init vf610_init_irq(void)
+{
+	l2x0_of_init(0, ~0UL);
+	irqchip_init();
+}
+
+static void __init vf610_init_time(void)
+{
+	of_clk_init(NULL);
+	clocksource_of_init();
+}
+
+static const char *vf610_dt_compat[] __initdata = {
+	"fsl,vf610",
+	NULL,
+};
+
+DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
+	.init_irq	= vf610_init_irq,
+	.init_time	= vf610_init_time,
+	.init_machine   = vf610_init_machine,
+	.dt_compat	= vf610_dt_compat,
+	.restart	= mxc_restart,
+MACHINE_END