SCSI: remove qlogicfc driver

The qla2xxx drivers take its place

drivers/scsi/Kconfig

@@ -1172,23 +1172,6 @@ config SCSI_QLOGIC_ISP
 	  To compile this driver as a module, choose M here: the
 	  module will be called qlogicisp.
 
-config SCSI_QLOGIC_FC
-	tristate "Qlogic ISP FC SCSI support"
-	depends on PCI && SCSI
-	help
-	  This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called qlogicfc.
-
-config SCSI_QLOGIC_FC_FIRMWARE
-	bool "Include loadable firmware in driver"
-	depends on SCSI_QLOGIC_FC
-  	help
-	  Say Y to include ISP2X00 Fabric Initiator/Target Firmware, with
-	  expanded LUN addressing and FcTape (FCP-2) support, in the
-	  qlogicfc driver. This is required on some platforms.
-
 config SCSI_QLOGIC_1280
 	tristate "Qlogic QLA 1280 SCSI support"
 	depends on PCI && SCSI

drivers/scsi/Makefile

@@ -69,7 +69,6 @@ obj-$(CONFIG_SCSI_NCR_Q720)	+= NCR_Q720_mod.o
 obj-$(CONFIG_SCSI_SYM53C416)	+= sym53c416.o
 obj-$(CONFIG_SCSI_QLOGIC_FAS)	+= qlogicfas.o
 obj-$(CONFIG_SCSI_QLOGIC_ISP)	+= qlogicisp.o 
-obj-$(CONFIG_SCSI_QLOGIC_FC)	+= qlogicfc.o 
 obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o 
 obj-$(CONFIG_SCSI_QLA2XXX)	+= qla2xxx/
 obj-$(CONFIG_SCSI_PAS16)	+= pas16.o

drivers/scsi/qlogicfc.h

-/*
- * QLogic ISP2x00 SCSI-FCP
- * 
- * Written by Erik H. Moe, ehm@cris.com
- * Copyright 1995, Erik H. Moe
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-/* Renamed and updated to 1.3.x by Michael Griffith <grif@cs.ucr.edu> */
-
-/* This is a version of the isp1020 driver which was modified by
- * Chris Loveland <cwl@iol.unh.edu> to support the isp2x00
- */
-
-
-/*
- * $Date: 1995/09/22 02:32:56 $
- * $Revision: 0.5 $
- *
- * $Log: isp1020.h,v $
- * Revision 0.5  1995/09/22  02:32:56  root
- * do auto request sense
- *
- * Revision 0.4  1995/08/07  04:48:28  root
- * supply firmware with driver.
- * numerous bug fixes/general cleanup of code.
- *
- * Revision 0.3  1995/07/16  16:17:16  root
- * added reset/abort code.
- *
- * Revision 0.2  1995/06/29  03:19:43  root
- * fixed biosparam.
- * added queue protocol.
- *
- * Revision 0.1  1995/06/25  01:56:13  root
- * Initial release.
- *
- */
-
-#ifndef _QLOGICFC_H
-#define _QLOGICFC_H
-
-/*
- * With the qlogic interface, every queue slot can hold a SCSI
- * command with up to 2 scatter/gather entries.  If we need more
- * than 2 entries, continuation entries can be used that hold
- * another 5 entries each.  Unlike for other drivers, this means
- * that the maximum number of scatter/gather entries we can
- * support at any given time is a function of the number of queue
- * slots available.  That is, host->can_queue and host->sg_tablesize
- * are dynamic and _not_ independent.  This all works fine because
- * requests are queued serially and the scatter/gather limit is
- * determined for each queue request anew.
- */
-
-#define DATASEGS_PER_COMMAND 2
-#define DATASEGS_PER_CONT 5
-
-#define QLOGICFC_REQ_QUEUE_LEN 255     /* must be power of two - 1 */
-#define QLOGICFC_MAX_SG(ql)	(DATASEGS_PER_COMMAND + (((ql) > 0) ? DATASEGS_PER_CONT*((ql) - 1) : 0))
-#define QLOGICFC_CMD_PER_LUN    8
-
-int isp2x00_detect(Scsi_Host_Template *);
-int isp2x00_release(struct Scsi_Host *);
-const char * isp2x00_info(struct Scsi_Host *);
-int isp2x00_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
-int isp2x00_abort(Scsi_Cmnd *);
-int isp2x00_reset(Scsi_Cmnd *, unsigned int);
-int isp2x00_biosparam(struct scsi_device *, struct block_device *,
-		sector_t, int[]);
-#endif /* _QLOGICFC_H */