Commit 5d9452e7 authored by Grygorii Strashko's avatar Grygorii Strashko Committed by Linus Walleij

gpio: omap: fix clk_prepare/unprepare usage

As per CCF documentation (clk.txt) the clk_prepare/unprepare APIs
are not allowed in atomic context. But now OMAP GPIO driver
uses them while applying debounce settings and as part
of PM runtime irqsafe operations:

- omap_gpio_debounce() is holding the lock with IRQs off.
  + omap2_set_gpio_debounce()
   + clk_prepare_enable()
    + clk_prepare() this one might sleep.

- pm_runtime_get_sync() is holding the lock with IRQs off
  + omap_gpio_runtime_suspend()
    + raw_spin_lock_irqsave()
    + omap_gpio_dbck_disable()
      + clk_disable_unprepare()

Hence, fix it by moeving dbclk prepare/unprepare in OMAP GPIO
omap_gpio_probe/omap_gpio_remove. Also, while here, ensure that
debounce functionality is disabled if clk_get() failed,
because otherwise kernel will carsh in omap2_set_gpio_debounce().
Reported-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: default avatarSantosh Shilimkar <ssantosh@kernel.org>
Tested-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 235f1eb1
......@@ -176,7 +176,7 @@ static inline void omap_gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set
static inline void omap_gpio_dbck_enable(struct gpio_bank *bank)
{
if (bank->dbck_enable_mask && !bank->dbck_enabled) {
clk_prepare_enable(bank->dbck);
clk_enable(bank->dbck);
bank->dbck_enabled = true;
writel_relaxed(bank->dbck_enable_mask,
......@@ -194,7 +194,7 @@ static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
*/
writel_relaxed(0, bank->base + bank->regs->debounce_en);
clk_disable_unprepare(bank->dbck);
clk_disable(bank->dbck);
bank->dbck_enabled = false;
}
}
......@@ -227,7 +227,7 @@ static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
l = BIT(offset);
clk_prepare_enable(bank->dbck);
clk_enable(bank->dbck);
reg = bank->base + bank->regs->debounce;
writel_relaxed(debounce, reg);
......@@ -241,7 +241,7 @@ static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
bank->dbck_enable_mask = val;
writel_relaxed(val, reg);
clk_disable_unprepare(bank->dbck);
clk_disable(bank->dbck);
/*
* Enable debounce clock per module.
* This call is mandatory because in omap_gpio_request() when
......@@ -286,7 +286,7 @@ static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
bank->context.debounce = 0;
writel_relaxed(bank->context.debounce, bank->base +
bank->regs->debounce);
clk_disable_unprepare(bank->dbck);
clk_disable(bank->dbck);
bank->dbck_enabled = false;
}
}
......@@ -1070,10 +1070,6 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
/* Initialize interface clk ungated, module enabled */
if (bank->regs->ctrl)
writel_relaxed(0, base + bank->regs->ctrl);
bank->dbck = clk_get(bank->dev, "dbclk");
if (IS_ERR(bank->dbck))
dev_err(bank->dev, "Could not get gpio dbck\n");
}
static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
......@@ -1234,6 +1230,17 @@ static int omap_gpio_probe(struct platform_device *pdev)
return PTR_ERR(bank->base);
}
if (bank->dbck_flag) {
bank->dbck = devm_clk_get(bank->dev, "dbclk");
if (IS_ERR(bank->dbck)) {
dev_err(bank->dev,
"Could not get gpio dbck. Disable debounce\n");
bank->dbck_flag = false;
} else {
clk_prepare(bank->dbck);
}
}
platform_set_drvdata(pdev, bank);
pm_runtime_enable(bank->dev);
......@@ -1265,6 +1272,8 @@ static int omap_gpio_remove(struct platform_device *pdev)
list_del(&bank->node);
gpiochip_remove(&bank->chip);
pm_runtime_disable(bank->dev);
if (bank->dbck_flag)
clk_unprepare(bank->dbck);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment